diff mbox series

[PATCHv3,02/36] powerpc: dts: t2080: add espi controller node support

Message ID 20200604151705.7582-3-Zhiqiang.Hou@nxp.com
State Accepted
Commit 76eb66d80a58c8914887efcf3412c37286295de2
Delegated to: Priyanka Jain
Headers show
Series spi: fsl-espi: Convert eSPI driver to DM | expand

Commit Message

Z.Q. Hou June 4, 2020, 3:16 p.m. UTC 
From: Chuanhua Han <chuanhua.han@nxp.com>

Add espi controller node to support t2080.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
V3:
 - No change.

 arch/powerpc/dts/t2080.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Priyanka Jain (OSS) Sept. 23, 2020, 1:31 p.m. UTC | #1 
>-----Original Message-----
>From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Zhiqiang Hou
>Sent: Thursday, June 4, 2020 8:47 PM
>To: u-boot@lists.denx.de; Priyanka Jain <priyanka.jain@nxp.com>; Shengzhou
>Liu <shengzhou.liu@nxp.com>; jagan@amarulasolutions.com;
>sjg@chromium.org; Biwen Li <biwen.li@nxp.com>; bmeng.cn@gmail.com
>Cc: Jiafei Pan <jiafei.pan@nxp.com>; Chuanhua Han
><chuanhua.han@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>; Z.q. Hou
><zhiqiang.hou@nxp.com>
>Subject: [PATCHv3 02/36] powerpc: dts: t2080: add espi controller node
>support
>
>From: Chuanhua Han <chuanhua.han@nxp.com>
>
>Add espi controller node to support t2080.
>
>Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
>Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
>Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>---
<snip>
V3 Series applied to u-boot-mpc85xx after some rebase. Awaiting upstream.

Thanks
Priyanka
diff mbox series

Patch

diff --git a/arch/powerpc/dts/t2080.dtsi b/arch/powerpc/dts/t2080.dtsi
index a9e9b404f6..7e446b18df 100644
--- a/arch/powerpc/dts/t2080.dtsi
+++ b/arch/powerpc/dts/t2080.dtsi
@@ -69,6 +69,16 @@ 
 			voltage-ranges = <1800 1800 3300 3300>;
 		};
 
+		espi0: spi@110000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc8536-espi";
+			reg = <0x110000 0x1000>;
+			interrupts = <53 0x2 0 0>;
+			fsl,espi-num-chipselects = <4>;
+			status = "disabled";
+		};
+
 		usb0: usb@210000 {
 			compatible = "fsl-usb2-mph";
 			reg = <0x210000 0x1000>;