sunxi: Add Drejo DS167 board

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 12ec6c71dc..55bbf7aa43 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -489,6 +489,8 @@  dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-drejo-ds167.dtb \
+	sun7i-a20-drejo-ds167-emmc.dtb \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-swac.dtb \
diff --git a/arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts b/arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts
new file mode 100644
index 0000000000..b6147eb013
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts
@@ -0,0 +1,69 @@ 
+/*
+ * Copyright 2020 Sertac TULLUK
+ *
+ * Sertac TULLUK <stulluk@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-drejo-ds167.dts"
+
+/ {
+	model = "drejo DS167-eMMC";
+	compatible = "drejo,sun7i-a20-drejo-ds167-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/dts/sun7i-a20-drejo-ds167.dts b/arch/arm/dts/sun7i-a20-drejo-ds167.dts
new file mode 100644
index 0000000000..cedeba0ff9
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-drejo-ds167.dts
@@ -0,0 +1,305 @@ 
+/*
+ * Copyright 2020 Sertac TULLUK
+ *
+ * Sertac TULLUK <stulluk@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "drejo DS167";
+	compatible = "drejo,sun7i-a20-drejo-ds167", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial3 = &uart3;
+
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_ds167>;
+
+		red {
+			label = "ds167-status";
+			gpios = <&pio 8 9 GPIO_ACTIVE_LOW>;  /* PI9 STATUS LED NEAR A20 DREJO */
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+
+	led_pins_ds167: led-pins {  
+		pins = "PI9";   /* Status led, on schematic, this is LED_EN */
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&pwm {
+      pinctrl-names = "default";
+      pinctrl-0 = <&pwm0_pin>;
+      status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>;
+	status = "okay";
+};
+
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 1180b86db3..3e88bd0002 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -206,6 +206,12 @@  M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Cubietruck_plus_defconfig
 
+DREJO DS167 BOARD
+M:      Sertac TULLUK <stulluk@gmail.com>
+S:      Maintained
+F:      configs/drejo-ds167-10.1-LVDS_defconfig
+F:      configs/drejo-ds167-7.0-LVDS_defconfig
+
 EMLID NEUTIS N5 DEV BOARD
 M:	Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
 S:	Maintained
diff --git a/configs/drejo-ds167-10.1-LVDS_defconfig b/configs/drejo-ds167-10.1-LVDS_defconfig
new file mode 100644
index 0000000000..6011ee2410
--- /dev/null
+++ b/configs/drejo-ds167-10.1-LVDS_defconfig
@@ -0,0 +1,30 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_I2C1_ENABLE=y
+CONFIG_SATAPWR="PB8"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-drejo-ds167-emmc"
+CONFIG_SCSI_AHCI=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_SUN7I_GMAC_FORCE_TXERR=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_SCSI=y
+# CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_OHCI_HCD=y
+CONFIG_VIDEO_HDMI=n
+CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
+CONFIG_VIDEO_LCD_MODE="x:1280,y:800,depth:18,pclk_khz:69000,le:19,ri:118,up:9,lo:6,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_VIDEO_LCD_POWER="PH8"
+CONFIG_VIDEO_LCD_BL_EN="PH7"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
diff --git a/configs/drejo-ds167-7.0-LVDS_defconfig b/configs/drejo-ds167-7.0-LVDS_defconfig
new file mode 100644
index 0000000000..53f64b54a0
--- /dev/null
+++ b/configs/drejo-ds167-7.0-LVDS_defconfig
@@ -0,0 +1,30 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_I2C1_ENABLE=y
+CONFIG_SATAPWR="PB8"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-drejo-ds167-emmc"
+CONFIG_SCSI_AHCI=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_SUN7I_GMAC_FORCE_TXERR=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_SCSI=y
+# CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_OHCI_HCD=y
+CONFIG_VIDEO_HDMI=n
+CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:22,ri:297,up:1,lo:33,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_VIDEO_LCD_POWER="PH8"
+CONFIG_VIDEO_LCD_BL_EN="PH7"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"