diff mbox series

[5/8] imx: convert mx6cuboxi board to DM_VIDEO

Message ID 20200525234137.9985-5-agust@denx.de
State Accepted
Delegated to: Anatolij Gustschin
Headers show
Series [1/8] imx: convert embest boards to DM_VIDEO | expand

Commit Message

Anatolij Gustschin May 25, 2020, 11:41 p.m. UTC 
Migration to DM_VIDEO driver is long overdue. Update defconfig
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
 configs/mx6cuboxi_defconfig | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

Comments

Anatolij Gustschin June 19, 2020, 1:47 p.m. UTC | #1 
On Tue, 26 May 2020 01:41:34 +0200
Anatolij Gustschin agust@denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfig
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Baruch Siach <baruch@tkos.co.il>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  configs/mx6cuboxi_defconfig | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij
diff mbox series

Patch

diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index df7e4611a0..69783310c2 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -22,7 +22,7 @@  CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
+CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
@@ -59,6 +59,11 @@  CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y