diff mbox series

[v3,3/4] mx6cuboxi: enable OF_CONTROL and DM in SPL

Message ID 20200519182424.19959-4-walter.lozano@collabora.com
State Accepted
Commit 6a4bae6c37206aaeab845f8b05a5b260b2c0b228
Delegated to: Stefano Babic
Headers show
Series mx6cuboxi: enable support for OF_CONTROL and DM in SPL | expand

Commit Message

Walter Lozano May 19, 2020, 6:24 p.m. UTC 
In order to take the beneficts of DT and DM in SPL, like reusing the code
and avoid redundancy, enable SPL_OF_CONTROL, SPL_DM and SPL_DM_MMC.

With this new configuration SPL image is 50 KB, higher than the
38 KB from the previous version, but it still under the 68 KB limit.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
---
 configs/mx6cuboxi_defconfig | 3 +++
 1 file changed, 3 insertions(+)

Comments

Stefano Babic June 23, 2020, 7:50 a.m. UTC | #1 
> In order to take the beneficts of DT and DM in SPL, like reusing the code
> and avoid redundancy, enable SPL_OF_CONTROL, SPL_DM and SPL_DM_MMC.
> With this new configuration SPL image is 50 KB, higher than the
> 38 KB from the previous version, but it still under the 68 KB limit.
> Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index df7e4611a0..e2bcaed89f 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -25,6 +25,7 @@  CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -37,6 +38,7 @@  CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6dl-hummingboard2-emmc-som-v15"
 CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15"
 CONFIG_MULTI_DTB_FIT=y
@@ -45,6 +47,7 @@  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SPL_DM=y
 CONFIG_DWC_AHSATA=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_USDHC=y