| Message ID | 20200427155306.105284-3-giulio.benetti@benettiengineering.com |
|---|---|
| State | Accepted |
| Commit | 2bdfde5a000001e5e401e51e21e0784bc83b9922 |
| Delegated to: | Stefano Babic |
| Headers | show |
| Series | Various i.MXRT bug/typo fixes | expand |
> Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive > damage. > Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic
diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README index 3da72fdad2..abee7ca5f3 100644 --- a/board/freescale/imxrt1020-evk/README +++ b/board/freescale/imxrt1020-evk/README @@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card: -sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync +sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync - Jumper settings:
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive damage. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> --- V2->V3: * change /dev/sdb to /dev/sdX as suggested by Fabio --- board/freescale/imxrt1020-evk/README | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)