Message ID | 20200424163405.16916-1-trini@konsulko.com |
---|---|
State | Accepted |
Commit | 69a229c6d4b488b03b6e34559d777b681e4931bd |
Delegated to: | Tom Rini |
Headers | show |
Series | sunxi: Fix PHY regression on A20-OLinuXino-Lime2 and A20-Olimex-SOM-EVB | expand |
On Fri, 24 Apr 2020 12:34:05 -0400 Tom Rini trini@konsulko.com wrote: > When moving the PHYLIB PHY drivers around in Kconfig we did not at the > same time perform a careful migration of the related drivers and > sub-options. This lead to the case where previously Kconfig-enabled > driver choices were now disabled on some platforms. Correct this by > enabling both the PHY driver and sub-option on the above referenced > platforms. > > Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") > Fixes: 8728c97eff5b ("configs: Re-sync") > Reported-by: Dario <dario86@tutamail.com> > Signed-off-by: Tom Rini <trini@konsulko.com> > --- > After checking back on the original commit I can see that these are the > only two platforms to have been broken in the change. configs/A20-OLinuXino-Lime2-eMMC_defconfig might need similar change. We get many build warnings like: include/configs/sunxi-common.h:276:0: warning: "CONFIG_PHY_REALTEK" redefined Could you include following change to fix it? diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 0ef289fd64..f4bbce8443 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -273,8 +273,10 @@ extern int soft_i2c_gpio_scl; /* Ethernet support */ #ifdef CONFIG_SUN7I_GMAC +#ifndef CONFIG_PHY_REALTEK #define CONFIG_PHY_REALTEK #endif +#endif #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_OHCI_NEW Thanks! Anatolij
On Fri, Apr 24, 2020 at 07:09:56PM +0200, Anatolij Gustschin wrote: > On Fri, 24 Apr 2020 12:34:05 -0400 > Tom Rini trini@konsulko.com wrote: > > > When moving the PHYLIB PHY drivers around in Kconfig we did not at the > > same time perform a careful migration of the related drivers and > > sub-options. This lead to the case where previously Kconfig-enabled > > driver choices were now disabled on some platforms. Correct this by > > enabling both the PHY driver and sub-option on the above referenced > > platforms. > > > > Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") > > Fixes: 8728c97eff5b ("configs: Re-sync") > > Reported-by: Dario <dario86@tutamail.com> > > Signed-off-by: Tom Rini <trini@konsulko.com> > > --- > > After checking back on the original commit I can see that these are the > > only two platforms to have been broken in the change. > > configs/A20-OLinuXino-Lime2-eMMC_defconfig might need similar change. > > We get many build warnings like: > include/configs/sunxi-common.h:276:0: warning: "CONFIG_PHY_REALTEK" redefined > > Could you include following change to fix it? > > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h > index 0ef289fd64..f4bbce8443 100644 > --- a/include/configs/sunxi-common.h > +++ b/include/configs/sunxi-common.h > @@ -273,8 +273,10 @@ extern int soft_i2c_gpio_scl; > /* Ethernet support */ > > #ifdef CONFIG_SUN7I_GMAC > +#ifndef CONFIG_PHY_REALTEK > #define CONFIG_PHY_REALTEK > #endif > +#endif > > #ifdef CONFIG_USB_EHCI_HCD > #define CONFIG_USB_OHCI_NEW The problem with that is that it's showing that this symbol, and a whole host of others from af2cbfd6b982 need to be migrated over to defconfigs.
On Fri, Apr 24, 2020 at 12:34:05PM -0400, Tom Rini wrote: > When moving the PHYLIB PHY drivers around in Kconfig we did not at the > same time perform a careful migration of the related drivers and > sub-options. This lead to the case where previously Kconfig-enabled > driver choices were now disabled on some platforms. Correct this by > enabling both the PHY driver and sub-option on the above referenced > platforms. > > Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") > Fixes: 8728c97eff5b ("configs: Re-sync") > Reported-by: Dario <dario86@tutamail.com> > Signed-off-by: Tom Rini <trini@konsulko.com> Applied to u-boot/master, thanks!
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 2b082cab595d..28b558cbeb6d 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -18,6 +18,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" CONFIG_SCSI_AHCI=y CONFIG_DFU_RAM=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_PHY_REALTEK=y +CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_MII=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 5b5ed3bb0a97..56f6ad82755b 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -15,6 +15,8 @@ CONFIG_AHCI=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb" CONFIG_SCSI_AHCI=y +CONFIG_PHY_REALTEK=y +CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_MII=y
When moving the PHYLIB PHY drivers around in Kconfig we did not at the same time perform a careful migration of the related drivers and sub-options. This lead to the case where previously Kconfig-enabled driver choices were now disabled on some platforms. Correct this by enabling both the PHY driver and sub-option on the above referenced platforms. Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") Fixes: 8728c97eff5b ("configs: Re-sync") Reported-by: Dario <dario86@tutamail.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- After checking back on the original commit I can see that these are the only two platforms to have been broken in the change. --- configs/A20-OLinuXino-Lime2_defconfig | 2 ++ configs/A20-Olimex-SOM-EVB_defconfig | 2 ++ 2 files changed, 4 insertions(+)