diff mbox series

[V3,09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII

Message ID 20200331175136.205020-10-marex@denx.de
State Accepted
Delegated to: Patrick Delaunay
Headers show
Series ARM: stm32: Fix Avenger96 | expand

Commit Message

Marek Vasut March 31, 2020, 5:51 p.m. UTC
Add another mux option for DWMAC RGMII, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
---
V2: No change
V3: No change
---
 arch/arm/dts/stm32mp157-pinctrl.dtsi | 51 ++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

Comments

Patrick Delaunay April 1, 2020, 10:03 a.m. UTC | #1
Hi,

> From: Marek Vasut <marex@denx.de>
> Sent: mardi 31 mars 2020 19:52
> 
> Add another mux option for DWMAC RGMII, this is used on AV96 board.
> 
> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Cc: Patrick Delaunay <patrick.delaunay@st.com>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> ---

Applied to u-boot-stm/master, thanks!

Regards

Patrick
diff mbox series

Patch

diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
index 964e4910ec..422dad1ddd 100644
--- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -288,6 +288,57 @@ 
 				};
 			};
 
+			ethernet0_rgmii_pins_b: rgmii-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins3 {
+					pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+					bias-disable;
+				};
+			};
+
+			ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+						 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+				};
+			};
+
 			fmc_pins_a: fmc-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */