diff mbox series

[V2,02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins

Message ID 20200331004851.282583-3-marex@denx.de
State Superseded
Delegated to: Patrick Delaunay
Headers show
Series ARM: stm32: Fix Avenger96 | expand

Commit Message

Marek Vasut March 31, 2020, 12:48 a.m. UTC
Add another mux option for SDMMC1 direction pins, in particular
SDMMC1_D123DIR, this is used on AV96 board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
---
V2: New patch
---
 arch/arm/dts/stm32mp157-pinctrl.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Patrice CHOTARD March 31, 2020, 8:26 a.m. UTC | #1
Hi Marek

On 3/31/20 2:48 AM, Marek Vasut wrote:
> Add another mux option for SDMMC1 direction pins, in particular
> SDMMC1_D123DIR, this is used on AV96 board.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Patrick Delaunay <patrick.delaunay@st.com>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> ---
> V2: New patch
> ---

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

Thanks


>  arch/arm/dts/stm32mp157-pinctrl.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
> index 81a363d93d..6842d4cdca 100644
> --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
> @@ -832,6 +832,30 @@
>  				};
>  			};
>  
> +			sdmmc1_dir_pins_b: sdmmc1-dir-1 {
> +				pins1 {
> +					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
> +						 <STM32_PINMUX('E', 14, AF8)>, /* SDMMC1_D123DIR */
> +						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
> +					slew-rate = <1>;
> +					drive-push-pull;
> +					bias-pull-up;
> +				};
> +				pins2{
> +					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
> +					bias-pull-up;
> +				};
> +			};
> +
> +			sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
> +				pins {
> +					pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
> +						 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
> +						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
> +						 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
> +				};
> +			};
> +
>  			sdmmc2_b4_pins_a: sdmmc2-b4-0 {
>  				pins1 {
>  					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
Patrick Delaunay March 31, 2020, 12:34 p.m. UTC | #2
Hi Marek

> From: Marek Vasut <marex@denx.de>
> Sent: mardi 31 mars 2020 02:49
> 
> Add another mux option for SDMMC1 direction pins, in particular
> SDMMC1_D123DIR, this is used on AV96 board.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Patrick Delaunay <patrick.delaunay@st.com>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> ---
> V2: New patch
> ---

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>

Thanks

Patrick
diff mbox series

Patch

diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
index 81a363d93d..6842d4cdca 100644
--- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -832,6 +832,30 @@ 
 				};
 			};
 
+			sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('E', 14, AF8)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+						 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+				};
+			};
+
 			sdmmc2_b4_pins_a: sdmmc2-b4-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */