| Message ID | 20200128170418.15912-2-GNUtoo@cyberdimension.org |
|---|---|
| State | Deferred |
| Delegated to: | Stefano Babic |
| Headers | show |
| Series | [v2,1/3] tbs2910: disable fuse command | expand |
On 28.01.20 18:04, Denis 'GNUtoo' Carikli wrote: > The loadb and loads commands are not needed for booting. > > There are also more reliable and faster alternatives to > loadb and loads that can be used with the current configuration. > > As that the resulting u-boot.imx image is already very close > to the size limit, removing the loadb and loads commands > shouldn't hurt. > > With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola > GNU/Linux distribution, it shrinks the image from 388096 to > 384000 bytes. > > Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> I don't know any use case of these commands on tbs2910, so Acked-by: Soeren Moch <smoch@web.de>
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 0f12b94257..0e91eeffd4 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -27,6 +27,8 @@ CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FUSE is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_PCI=y
The loadb and loads commands are not needed for booting. There are also more reliable and faster alternatives to loadb and loads that can be used with the current configuration. As that the resulting u-boot.imx image is already very close to the size limit, removing the loadb and loads commands shouldn't hurt. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, it shrinks the image from 388096 to 384000 bytes. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> --- configs/tbs2910_defconfig | 2 ++ 1 file changed, 2 insertions(+)