@@ -116,6 +116,13 @@ static const struct i2c_mode_info info_for_mode[] = {
300,
300,
},
+ [IC_SPEED_MODE_FAST_PLUS] = {
+ I2C_SPEED_FAST_PLUS_RATE,
+ MIN_FP_SCL_HIGHTIME,
+ MIN_FP_SCL_LOWTIME,
+ 260,
+ 500,
+ },
[IC_SPEED_MODE_HIGH] = {
I2C_SPEED_HIGH_RATE,
MIN_HS_SCL_HIGHTIME,
@@ -230,6 +237,8 @@ static unsigned int __dw_i2c_set_bus_speed(struct dw_i2c *priv,
(!scl_sda_cfg || scl_sda_cfg->has_high_speed))
i2c_spd = IC_SPEED_MODE_HIGH;
else if (speed >= I2C_SPEED_FAST_RATE)
+ i2c_spd = IC_SPEED_MODE_FAST_PLUS;
+ else if (speed >= I2C_SPEED_FAST_PLUS_RATE)
i2c_spd = IC_SPEED_MODE_FAST;
else
i2c_spd = IC_SPEED_MODE_STANDARD;
@@ -271,13 +280,12 @@ static unsigned int __dw_i2c_set_bus_speed(struct dw_i2c *priv,
writel(config.scl_hcnt, &i2c_base->ic_hs_scl_hcnt);
writel(config.scl_lcnt, &i2c_base->ic_hs_scl_lcnt);
break;
-
case IC_SPEED_MODE_STANDARD:
cntl |= IC_CON_SPD_SS;
writel(config.scl_hcnt, &i2c_base->ic_ss_scl_hcnt);
writel(config.scl_lcnt, &i2c_base->ic_ss_scl_lcnt);
break;
-
+ case IC_SPEED_MODE_FAST_PLUS:
case IC_SPEED_MODE_FAST:
default:
cntl |= IC_CON_SPD_FS;
@@ -68,6 +68,8 @@ struct i2c_regs {
#define MIN_SS_SCL_LOWTIME 4700
#define MIN_FS_SCL_HIGHTIME 600
#define MIN_FS_SCL_LOWTIME 1300
+#define MIN_FP_SCL_HIGHTIME 260
+#define MIN_FP_SCL_LOWTIME 500
#define MIN_HS_SCL_HIGHTIME 60
#define MIN_HS_SCL_LOWTIME 160
Fast-plus runs at 1MHz and is used by some devices. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v3: - Add new patch with support for fast-plus speed Changes in v2: None drivers/i2c/designware_i2c.c | 12 ++++++++++-- drivers/i2c/designware_i2c.h | 2 ++ 2 files changed, 12 insertions(+), 2 deletions(-)