Message ID | 20191024093103.13220-12-j-keerthy@ti.com |
---|---|
State | Accepted |
Commit | c5f73d1c9f62d1c704f0fe09ce0505591f6709e9 |
Delegated to: | Tom Rini |
Headers | show |
Series | misc: Add AVS class 0 support for AM6 | expand |
On Thu, Oct 24, 2019 at 03:00:56PM +0530, Keerthy wrote: > From: Tero Kristo <t-kristo@ti.com> > > MPU voltage on AM65x-evm is controlled via the TPS62363 chip attached > to i2c0 bus. Add device node for this so that it can be controlled via > a regulator driver. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Signed-off-by: Keerthy <j-keerthy@ti.com> Applied to u-boot/master, thanks!
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 98868afd9c..baa3a2c9e7 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -219,4 +219,17 @@ pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; u-boot,dm-spl; + + vdd_mpu: tps62363@60 { + compatible = "ti,tps62363"; + reg = <0x60>; + regulator-name = "VDD_MPU"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-always-on; + regulator-boot-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + u-boot,dm-spl; + }; };