diff mbox series

[U-Boot,v2,23/26] configs: am65x_evm_a53: Enhance bootcmd to start remoteprocs

Message ID 20190904103151.20121-24-lokeshvutla@ti.com
State Accepted
Delegated to: Tom Rini
Headers show
Series remoteproc: Add support for R5F and DSP processors | expand

Commit Message

Lokesh Vutla Sept. 4, 2019, 10:31 a.m. UTC 
From: Suman Anna <s-anna@ti.com>

The A53 U-boot can support early booting of the MCU R5F remote processor(s)
from U-boot prompt to achieve various system usecases before booting the
Linux kernel. Update the default BOOTCOMMAND to provide an automatic and
easier way to start the MCU R5F cores through added environment variables.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 configs/am65x_evm_a53_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Tom Rini Oct. 12, 2019, 8:26 p.m. UTC | #1 
On Wed, Sep 04, 2019 at 04:01:48PM +0530, Lokesh Vutla wrote:

> From: Suman Anna <s-anna@ti.com>
> 
> The A53 U-boot can support early booting of the MCU R5F remote processor(s)
> from U-boot prompt to achieve various system usecases before booting the
> Linux kernel. Update the default BOOTCOMMAND to provide an automatic and
> easier way to start the MCU R5F cores through added environment variables.
> 
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index d6a0d8583c..2d91d25b6a 100644
--- a/configs/am65x_evm_a53_defconfig
+++ b/configs/am65x_evm_a53_defconfig
@@ -16,7 +16,7 @@  CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_TEXT_BASE=0x80080000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y