diff mbox series

[U-Boot,17/25] env: ti: k3_rproc: Add common rproc environment variables

Message ID 20190828125534.29408-18-lokeshvutla@ti.com
State Changes Requested
Delegated to: Tom Rini
Headers show
Series remoteproc: Add support for R5F and DSP processors | expand

Commit Message

Lokesh Vutla Aug. 28, 2019, 12:55 p.m. UTC 
From: Suman Anna <s-anna@ti.com>

Add a new file include/environment/ti/k3_rproc.h that defines
common environment variables useful for booting various remote
processors from U-Boot. This file is expected to be included in
the board config files with the EXTRA_ENV_RPROC_SETTINGS added
to CONFIG_EXTRA_ENV_SETTINGS and DEFAULT_RPROCS macro overwritten
to include the actual list of processors to be booted.

The 'boot_rprocs' variable just needs to be added to the board's
bootcmd to automatically boot the processors, and runtime control
can be achieved through the 'dorprocboot' variable.

The variables are currently defined to use MMC as the boot media,
and can be expanded in the future to include other boot media.
The immediate usage is intended for K3 J721E SoCs.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 include/environment/ti/k3_rproc.h | 52 +++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 include/environment/ti/k3_rproc.h
diff mbox series

Patch

diff --git a/include/environment/ti/k3_rproc.h b/include/environment/ti/k3_rproc.h
new file mode 100644
index 0000000000..3418cb42be
--- /dev/null
+++ b/include/environment/ti/k3_rproc.h
@@ -0,0 +1,52 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * rproc environment variable definitions for various TI K3 SoCs.
+ */
+
+#ifndef __TI_RPROC_H
+#define __TI_RPROC_H
+
+/*
+ * should contain a list of <rproc_id fw_name> tuplies,
+ * override in board config files with the actual list
+ */
+#define DEFAULT_RPROCS ""
+
+#ifdef CONFIG_CMD_REMOTEPROC
+#define EXTRA_ENV_RPROC_SETTINGS					\
+	"dorprocboot=0\0"						\
+	"boot_rprocs="							\
+		"if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then "\
+			"rproc init;"					\
+			"run boot_rprocs_mmc;"				\
+		"fi;\0"							\
+	"rproc_load_and_boot_one="					\
+		"if load mmc ${bootpart} $loadaddr ${rproc_fw}; then "	\
+			"if rproc load ${rproc_id} ${loadaddr} ${filesize}; then "\
+				"rproc start ${rproc_id};"		\
+			"fi;"						\
+		"fi\0"							\
+	"boot_rprocs_mmc="						\
+		"env set rproc_id;"					\
+		"env set rproc_fw;"					\
+		"for i in ${rproc_fw_binaries} ; do "			\
+			"if test -z \"${rproc_id}\" ; then "		\
+				"env set rproc_id $i;"			\
+			"else "						\
+				"env set rproc_fw $i;"			\
+				"run rproc_load_and_boot_one;"		\
+				"env set rproc_id;"			\
+				"env set rproc_fw;"			\
+			"fi;"						\
+		"done\0"						\
+	"rproc_fw_binaries="						\
+		DEFAULT_RPROCS						\
+		"\0"
+#else
+#define EXTRA_ENV_RPROC_SETTINGS					\
+	"boot_rprocs= \0"
+#endif /* CONFIG_CMD_REMOTEPROC */
+
+#endif /* __TI_RPROC_H */