| Message ID | 20190802074004.4301-7-matwey.kornilov@gmail.com |
|---|---|
| State | Accepted |
| Commit | ff3dd0a47441033d5f844cb51f588d209db07864 |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | Add TPL support for Pine64 Rock64 board. | expand |
On 2019/8/2 下午3:40, Matwey V. Kornilov wrote: > Until now, binary TPL by Rockchip has been required for booting > procedure. Starting from this commit we may use only u-boot to boot > the device. > > Note, that using binary TPL instead of U-boot TPL is still working. > > Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > configs/rock64-rk3328_defconfig | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig > index ef453e72c1..6484845fb6 100644 > --- a/configs/rock64-rk3328_defconfig > +++ b/configs/rock64-rk3328_defconfig > @@ -34,15 +34,20 @@ CONFIG_CMD_USB=y > CONFIG_CMD_TIME=y > CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64" > CONFIG_SPL_OF_CONTROL=y > +CONFIG_TPL_OF_CONTROL=y > CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_TPL_OF_PLATDATA=y > CONFIG_ENV_IS_IN_MMC=y > CONFIG_NET_RANDOM_ETHADDR=y > CONFIG_REGMAP=y > CONFIG_SPL_REGMAP=y > +CONFIG_TPL_REGMAP=y > CONFIG_SYSCON=y > CONFIG_SPL_SYSCON=y > +CONFIG_TPL_SYSCON=y > CONFIG_CLK=y > CONFIG_SPL_CLK=y > +CONFIG_TPL_CLK=y > CONFIG_FASTBOOT_CMD_OEM_FORMAT=y > CONFIG_ROCKCHIP_GPIO=y > CONFIG_SYS_I2C_ROCKCHIP=y > @@ -65,6 +70,7 @@ CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > CONFIG_RAM=y > CONFIG_SPL_RAM=y > +CONFIG_TPL_RAM=y > CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > @@ -85,4 +91,12 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x330a > CONFIG_USB_GADGET_DWC2_OTG=y > CONFIG_USE_TINY_PRINTF=y > CONFIG_SPL_TINY_MEMSET=y > +CONFIG_TPL_TINY_MEMSET=y > CONFIG_ERRNO_STR=y > +CONFIG_TPL_DM=y > +CONFIG_TPL_LIBCOMMON_SUPPORT=y > +CONFIG_TPL_LIBGENERIC_SUPPORT=y > +CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y > +CONFIG_TPL_BOOTROM_SUPPORT=y > +CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 > +CONFIG_TPL_SYS_MALLOC_SIMPLE=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig index ef453e72c1..6484845fb6 100644 --- a/configs/rock64-rk3328_defconfig +++ b/configs/rock64-rk3328_defconfig @@ -34,15 +34,20 @@ CONFIG_CMD_USB=y CONFIG_CMD_TIME=y CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64" CONFIG_SPL_OF_CONTROL=y +CONFIG_TPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_TPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y +CONFIG_TPL_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_SYSCON=y +CONFIG_TPL_SYSCON=y CONFIG_CLK=y CONFIG_SPL_CLK=y +CONFIG_TPL_CLK=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y @@ -65,6 +70,7 @@ CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y CONFIG_DM_RESET=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 @@ -85,4 +91,12 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x330a CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USE_TINY_PRINTF=y CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y +CONFIG_TPL_DM=y +CONFIG_TPL_LIBCOMMON_SUPPORT=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_TPL_BOOTROM_SUPPORT=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 +CONFIG_TPL_SYS_MALLOC_SIMPLE=y
Until now, binary TPL by Rockchip has been required for booting procedure. Starting from this commit we may use only u-boot to boot the device. Note, that using binary TPL instead of U-boot TPL is still working. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- configs/rock64-rk3328_defconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+)