Message ID | 20190801061818.23585-1-peng.fan@nxp.com |
---|---|
State | Accepted |
Commit | 8a6e1b1dda2a95cc0b675b704faf2188681e363a |
Delegated to: | Stefano Babic |
Headers | show |
Series | [U-Boot,1/2] imx: mx6ul_14x14_evk: Fix SPL boot | expand |
On Thu, Aug 1, 2019 at 3:02 AM Peng Fan <peng.fan@nxp.com> wrote: > > When booting SPL on the board, met boot failure: > " > Trying to boot from MMC2 > MMC Device 1 not found > spl: could not find mmc device 1. error: -19 > SPL: failed to boot from all boot devices > " > > Let's register the two mmc controllers in SPL stage to > avoid boot failure. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Subject: [PATCH 1/2] imx: mx6ul_14x14_evk: Fix SPL boot > > When booting SPL on the board, met boot failure: > " > Trying to boot from MMC2 > MMC Device 1 not found > spl: could not find mmc device 1. error: -19 > SPL: failed to boot from all boot devices " > > Let's register the two mmc controllers in SPL stage to avoid boot failure. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- Applied to nxp-imx-8-13, https://github.com/MrVan/u-boot/tree/nxp-imx-8-13 Regards, Peng.
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 785247f7e2..af5af4d50a 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -110,7 +110,6 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -#ifndef CONFIG_SPL_BUILD static iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -126,7 +125,6 @@ static iomux_v3_cfg_t const usdhc1_pads[] = { /* RST_B */ MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -#endif /* * mx6ul_14x14_evk board default supports sd card. If want to use @@ -237,19 +235,6 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { -#ifdef CONFIG_SPL_BUILD -#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK) - imx_iomux_v3_setup_multiple_pads(usdhc2_emmc_pads, - ARRAY_SIZE(usdhc2_emmc_pads)); -#else - imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); -#endif - gpio_direction_output(USDHC2_PWR_GPIO, 0); - udelay(500); - gpio_direction_output(USDHC2_PWR_GPIO, 1); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); -#else int i, ret; /* @@ -296,7 +281,6 @@ int board_mmc_init(bd_t *bis) return ret; } } -#endif return 0; } #endif
When booting SPL on the board, met boot failure: " Trying to boot from MMC2 MMC Device 1 not found spl: could not find mmc device 1. error: -19 SPL: failed to boot from all boot devices " Let's register the two mmc controllers in SPL stage to avoid boot failure. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 16 ---------------- 1 file changed, 16 deletions(-)