Message ID | 20190719132310.GB20880@arachsys.com |
---|---|
State | Accepted |
Commit | 58fcb03e671fbe847a0007171d4d54dad5af8139 |
Delegated to: | Kever Yang |
Headers | show |
Series | rockchip: tpl.c #ifdef fixes | expand |
Hi Chris, On 2019/7/19 下午9:23, Chris Webb wrote: > If CONFIG_DEBUG_UART is set but CONFIG_TPL_SERIAL_SUPPORT is not, the > serial output should be available in SPL and full U-Boot, but not built > in TPL. However, the rockchip tpl.c instead fails to compile with > undefined references to the debug UART. > > Instead, initialise the debug UART and print the TPL banner only if both > CONFIG_DEBUG_UART and CONFIG_TPL_SERIAL_SUPPORT are set. > > Signed-off-by: <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> Thanks, - Kever > --- > arch/arm/mach-rockchip/tpl.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c > index 0ff2a197ed..5df88bddeb 100644 > --- a/arch/arm/mach-rockchip/tpl.c > +++ b/arch/arm/mach-rockchip/tpl.c > @@ -44,7 +44,7 @@ void board_init_f(ulong dummy) > struct udevice *dev; > int ret; > > -#ifdef CONFIG_DEBUG_UART > +#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT) > /* > * Debug UART can be used from here if required: > * >
On 2019/7/21 上午11:30, Kever Yang wrote: > Hi Chris, > > > On 2019/7/19 下午9:23, Chris Webb wrote: >> If CONFIG_DEBUG_UART is set but CONFIG_TPL_SERIAL_SUPPORT is not, the >> serial output should be available in SPL and full U-Boot, but not built >> in TPL. However, the rockchip tpl.c instead fails to compile with >> undefined references to the debug UART. >> >> Instead, initialise the debug UART and print the TPL banner only if both >> CONFIG_DEBUG_UART and CONFIG_TPL_SERIAL_SUPPORT are set. >> >> Signed-off-by: <chris@arachsys.com> > Applied to u-boot-rockchip, thanks! > Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> > > Thanks, > - Kever >> --- >> arch/arm/mach-rockchip/tpl.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c >> index 0ff2a197ed..5df88bddeb 100644 >> --- a/arch/arm/mach-rockchip/tpl.c >> +++ b/arch/arm/mach-rockchip/tpl.c >> @@ -44,7 +44,7 @@ void board_init_f(ulong dummy) >> struct udevice *dev; >> int ret; >> -#ifdef CONFIG_DEBUG_UART >> +#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT) >> /* >> * Debug UART can be used from here if required: >> * >> > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot
diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c index 0ff2a197ed..5df88bddeb 100644 --- a/arch/arm/mach-rockchip/tpl.c +++ b/arch/arm/mach-rockchip/tpl.c @@ -44,7 +44,7 @@ void board_init_f(ulong dummy) struct udevice *dev; int ret; -#ifdef CONFIG_DEBUG_UART +#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT) /* * Debug UART can be used from here if required: *
If CONFIG_DEBUG_UART is set but CONFIG_TPL_SERIAL_SUPPORT is not, the serial output should be available in SPL and full U-Boot, but not built in TPL. However, the rockchip tpl.c instead fails to compile with undefined references to the debug UART. Instead, initialise the debug UART and print the TPL banner only if both CONFIG_DEBUG_UART and CONFIG_TPL_SERIAL_SUPPORT are set. Signed-off-by: <chris@arachsys.com> --- arch/arm/mach-rockchip/tpl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)