| Message ID | 20190621022202.33996-3-chuanhua.han@nxp.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
| Series | dm: spi: Convert Freescale ESPI driver to driver | expand |
+ Simon Glass > -----Original Message----- > From: Chuanhua Han <chuanhua.han@nxp.com> > Sent: 2019年6月21日 10:22 > To: wd@denx.de; Shengzhou Liu <shengzhou.liu@nxp.com>; Ruchika Gupta > <ruchika.gupta@nxp.com>; jagan@openedev.com; sjg@chromium.org; > Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> > Cc: u-boot@lists.denx.de; Chuanhua Han <chuanhua.han@nxp.com> > Subject: [PATCH v4 2/5] dm: spi: Convert Freescale ESPI driver to driver model > > Modify the Freescale ESPI driver to support the driver model. > Also resolved the following problems: > > ===================== WARNING ====================== This board > does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no > dm conversion and v2019.07 for partially dm converted drivers. > Failure to update can lead to driver/board removal See > doc/driver-model/MIGRATION.txt for more info. > ==================================================== > ===================== WARNING ====================== This board > does not use CONFIG_DM_SPI_FLASH. Please update the board to use > CONFIG_SPI_FLASH before the v2019.07 release. > Failure to update by the deadline may result in board removal. > See doc/driver-model/MIGRATION.txt for more info. > ==================================================== > > Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> > --- > Changes in v4: > - Update copyright information. > - Move the fsl_espi_platdata data structure to the > include/dm/platform_data/. > - Merge the contents of the fsl_espi_priv structure into the fsl_spi_slave > structure. > - Implement the fsl_espi_set_speed function. > - Implement the fsl_espi_set_mode function. > - Implement the espi_release_bus function. > - Remove unwanted fsl_espi_bind functions. > - Implement the fsl_espi_child_pre_probe function as needed. > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) > && !CONFIG_IS_ENABLED(OF_PLATDATA). > Changes in v3: > - Add a cover-letter for this patch set. > Changes in v2: > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > drivers/spi/fsl_espi.c | 444 ++++++++++++++++++++-------- > include/dm/platform_data/fsl_espi.h | 16 + > 2 files changed, 339 insertions(+), 121 deletions(-) create mode 100644 > include/dm/platform_data/fsl_espi.h > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index > 7444ae1a06..849f65f0e6 100644 > --- a/drivers/spi/fsl_espi.c > +++ b/drivers/spi/fsl_espi.c > @@ -3,18 +3,25 @@ > * eSPI controller driver. > * > * Copyright 2010-2011 Freescale Semiconductor, Inc. > + * Copyright 2019 NXP > * Author: Mingkai Hu (Mingkai.hu@freescale.com) > + * Chuanhua Han (chuanhua.han@nxp.com) > */ > > #include <common.h> > - > #include <malloc.h> > #include <spi.h> > #include <asm/immap_85xx.h> > +#include <dm.h> > +#include <errno.h> > +#include <fdtdec.h> > +#include <dm/platform_data/fsl_espi.h> > > struct fsl_spi_slave { > struct spi_slave slave; > ccsr_espi_t *espi; > + u32 speed_hz; > + unsigned int cs; > unsigned int div16; > unsigned int pm; > int tx_timeout; > @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s) > container_of(s, struct fsl_spi_slave, slave) > #define US_PER_SECOND 1000000UL > > +/* default SCK frequency, unit: HZ */ > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 > + > #define ESPI_MAX_CS_NUM 4 > #define ESPI_FIFO_WIDTH_BIT 32 > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > - unsigned int max_hz, unsigned int mode) > -{ > - struct fsl_spi_slave *fsl; > - sys_info_t sysinfo; > - unsigned long spibrg = 0; > - unsigned long spi_freq = 0; > - unsigned char pm = 0; > - > - if (!spi_cs_is_valid(bus, cs)) > - return NULL; > - > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > - if (!fsl) > - return NULL; > - > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > - fsl->mode = mode; > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > - > - /* Set eSPI BRG clock source */ > - get_sys_info(&sysinfo); > - spibrg = sysinfo.freq_systembus / 2; > - fsl->div16 = 0; > - if ((spibrg / max_hz) > 32) { > - fsl->div16 = ESPI_CSMODE_DIV16; > - pm = spibrg / (max_hz * 16 * 2); > - if (pm > 16) { > - pm = 16; > - debug("Requested speed is too low: %d Hz, %ld Hz " > - "is used.\n", max_hz, spibrg / (32 * 16)); > - } > - } else > - pm = spibrg / (max_hz * 2); > - if (pm) > - pm--; > - fsl->pm = pm; > - > - if (fsl->div16) > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > - else > - spi_freq = spibrg / ((pm + 1) * 2); > - > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > ESPI_FIFO_WIDTH_BIT > - * 10), spi_freq); > - > - return &fsl->slave; > -} > - > -void spi_free_slave(struct spi_slave *slave) > +void spi_cs_activate(struct spi_slave *slave) > { > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > - free(fsl); > + ccsr_espi_t *espi = fsl->espi; > + unsigned int com = 0; > + size_t data_len = fsl->data_len; > + uint cs; > +#ifndef CONFIG_DM_SPI > + cs = slave->cs; > +#else > + cs = fsl->cs; > +#endif > + com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); > + com |= ESPI_COM_CS(cs); > + com |= ESPI_COM_TRANLEN(data_len - 1); > + out_be32(&espi->com, com); > } > > -int spi_claim_bus(struct spi_slave *slave) > +void spi_cs_deactivate(struct spi_slave *slave) > { > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > ccsr_espi_t *espi = fsl->espi; > - unsigned char pm = fsl->pm; > - unsigned int cs = slave->cs; > - unsigned int mode = fsl->mode; > - unsigned int div16 = fsl->div16; > - int i; > - > - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); > - > - /* Enable eSPI interface */ > - out_be32(&espi->mode, ESPI_MODE_RXTHR(3) > - | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); > - > - out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ > - out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ > - > - /* Init CS mode interface */ > - for (i = 0; i < ESPI_MAX_CS_NUM; i++) > - out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); > - > - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & > - ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 > - | ESPI_CSMODE_CI_INACTIVEHIGH | > ESPI_CSMODE_CP_BEGIN_EDGCLK > - | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); > - > - /* Set eSPI BRG clock source */ > - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > - | ESPI_CSMODE_PM(pm) | div16); > - > - /* Set eSPI mode */ > - if (mode & SPI_CPHA) > - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > - | ESPI_CSMODE_CP_BEGIN_EDGCLK); > - if (mode & SPI_CPOL) > - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > - | ESPI_CSMODE_CI_INACTIVEHIGH); > - > - /* Character bit order: msb first */ > - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > - | ESPI_CSMODE_REV_MSB_FIRST); > - > - /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ > - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > - | ESPI_CSMODE_LEN(7)); > - > - return 0; > -} > - > -void spi_release_bus(struct spi_slave *slave) -{ > > + /* clear the RXCNT and TXCNT */ > + out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); > + out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); > } > > static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) @@ -204,7 > +130,8 @@ static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) > debug("***spi_xfer:...Tx timeout! event = %08x\n", event); } > > -static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes) > +static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, > + unsigned int bytes) > { > ccsr_espi_t *espi = fsl->espi; > unsigned int tmpdin, rx_times; > @@ -236,10 +163,17 @@ static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, > unsigned int bytes) > return bytes; > } > > -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, > - void *data_in, unsigned long flags) > +void espi_release_bus(struct fsl_spi_slave *fsl) > { > - struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > + /* Disable the SPI hardware */ > + out_be32(&fsl->espi->mode, > + in_be32(&fsl->espi->mode) & (~ESPI_MODE_EN)); } > + > +int espi_xfer(struct fsl_spi_slave *fsl, uint cs, unsigned int bitlen, > + const void *data_out, void *data_in, unsigned long flags) { > + struct spi_slave *slave = &fsl->slave; > ccsr_espi_t *espi = fsl->espi; > unsigned int event, rx_bytes; > const void *dout = NULL; > @@ -258,7 +192,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, > const void *data_out, > max_tran_len = fsl->max_transfer_length; > switch (flags) { > case SPI_XFER_BEGIN: > - cmd_len = fsl->cmd_len = data_len; > + cmd_len = data_len; > + fsl->cmd_len = cmd_len; > memcpy(cmd_buf, data_out, cmd_len); > return 0; > case 0: > @@ -354,30 +289,297 @@ int spi_xfer(struct spi_slave *slave, unsigned int > bitlen, const void *data_out, > return 0; > } > > +void espi_claim_bus(struct fsl_spi_slave *fsl, unsigned int cs) { > + ccsr_espi_t *espi = fsl->espi; > + unsigned char pm = fsl->pm; > + unsigned int mode = fsl->mode; > + unsigned int div16 = fsl->div16; > + int i; > + > + /* Enable eSPI interface */ > + out_be32(&espi->mode, ESPI_MODE_RXTHR(3) > + | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); > + > + out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ > + out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ > + > + /* Init CS mode interface */ > + for (i = 0; i < ESPI_MAX_CS_NUM; i++) > + out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); > + > + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & > + ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 > + | ESPI_CSMODE_CI_INACTIVEHIGH | > ESPI_CSMODE_CP_BEGIN_EDGCLK > + | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); > + > + /* Set eSPI BRG clock source */ > + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > + | ESPI_CSMODE_PM(pm) | div16); > + > + /* Set eSPI mode */ > + if (mode & SPI_CPHA) > + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > + | ESPI_CSMODE_CP_BEGIN_EDGCLK); > + if (mode & SPI_CPOL) > + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > + | ESPI_CSMODE_CI_INACTIVEHIGH); > + > + /* Character bit order: msb first */ > + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > + | ESPI_CSMODE_REV_MSB_FIRST); > + > + /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ > + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) > + | ESPI_CSMODE_LEN(7)); > +} > + > +void espi_setup_slave(struct fsl_spi_slave *fsl) { > + unsigned int max_hz; > + sys_info_t sysinfo; > + unsigned long spibrg = 0; > + unsigned long spi_freq = 0; > + unsigned char pm = 0; > + > + max_hz = fsl->speed_hz; > + > + get_sys_info(&sysinfo); > + spibrg = sysinfo.freq_systembus / 2; > + fsl->div16 = 0; > + if ((spibrg / max_hz) > 32) { > + fsl->div16 = ESPI_CSMODE_DIV16; > + pm = spibrg / (max_hz * 16 * 2); > + if (pm > 16) { > + pm = 16; > + debug("max_hz is too low: %d Hz, %ld Hz is used.\n", > + max_hz, spibrg / (32 * 16)); > + } > + } else { > + pm = spibrg / (max_hz * 2); > + } > + if (pm) > + pm--; > + fsl->pm = pm; > + > + if (fsl->div16) > + spi_freq = spibrg / ((pm + 1) * 2 * 16); > + else > + spi_freq = spibrg / ((pm + 1) * 2); > + > + /* set tx_timeout to 10 times of one espi FIFO entry go out */ > + fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > ESPI_FIFO_WIDTH_BIT > + * 10), spi_freq);/* Set eSPI BRG clock source */ } > + > +#ifndef CONFIG_DM_SPI > int spi_cs_is_valid(unsigned int bus, unsigned int cs) { > return bus == 0 && cs < ESPI_MAX_CS_NUM; } > > -void spi_cs_activate(struct spi_slave *slave) > +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > + unsigned int max_hz, unsigned int mode) { > + struct fsl_spi_slave *fsl; > + > + if (!spi_cs_is_valid(bus, cs)) > + return NULL; > + > + fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > + if (!fsl) > + return NULL; > + > + fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > + fsl->mode = mode; > + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > + fsl->speed_hz = max_hz; > + > + espi_setup_slave(fsl); > + > + return &fsl->slave; > +} > + > +void spi_free_slave(struct spi_slave *slave) > { > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > - ccsr_espi_t *espi = fsl->espi; > - unsigned int com = 0; > - size_t data_len = fsl->data_len; > > - com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); > - com |= ESPI_COM_CS(slave->cs); > - com |= ESPI_COM_TRANLEN(data_len - 1); > - out_be32(&espi->com, com); > + free(fsl); > } > > -void spi_cs_deactivate(struct spi_slave *slave) > +int spi_claim_bus(struct spi_slave *slave) > { > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > - ccsr_espi_t *espi = fsl->espi; > > - /* clear the RXCNT and TXCNT */ > - out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); > - out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); > + espi_claim_bus(fsl, slave->cs); > + > + return 0; > } > + > +void spi_release_bus(struct spi_slave *slave) { > + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > + > + espi_release_bus(fsl); > +} > + > +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, > + void *din, unsigned long flags) > +{ > + struct fsl_spi_slave *fsl = (struct fsl_spi_slave *)slave; > + > + return espi_xfer(fsl, slave->cs, bitlen, dout, din, flags); } #else > +static void __espi_set_speed(struct fsl_spi_slave *fsl) { > + espi_setup_slave(fsl); > + > + /* Set eSPI BRG clock source */ > + out_be32(&fsl->espi->csmode[fsl->cs], > + in_be32(&fsl->espi->csmode[fsl->cs]) > + | ESPI_CSMODE_PM(fsl->pm) | fsl->div16); } > + > +static void __espi_set_mode(struct fsl_spi_slave *fsl) { > + /* Set eSPI mode */ > + if (fsl->mode & SPI_CPHA) > + out_be32(&fsl->espi->csmode[fsl->cs], > + in_be32(&fsl->espi->csmode[fsl->cs]) > + | ESPI_CSMODE_CP_BEGIN_EDGCLK); > + if (fsl->mode & SPI_CPOL) > + out_be32(&fsl->espi->csmode[fsl->cs], > + in_be32(&fsl->espi->csmode[fsl->cs]) > + | ESPI_CSMODE_CI_INACTIVEHIGH); > +} > + > +static int fsl_espi_claim_bus(struct udevice *dev) { > + struct udevice *bus = dev->parent; > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + espi_claim_bus(fsl, fsl->cs); > + > + return 0; > +} > + > +static int fsl_espi_release_bus(struct udevice *dev) { > + struct udevice *bus = dev->parent; > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + espi_release_bus(fsl); > + > + return 0; > +} > + > +static int fsl_espi_xfer(struct udevice *dev, unsigned int bitlen, > + const void *dout, void *din, unsigned long flags) { > + struct udevice *bus = dev->parent; > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + return espi_xfer(fsl, fsl->cs, bitlen, dout, din, flags); } > + > +static int fsl_espi_set_speed(struct udevice *bus, uint speed) { > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + debug("%s speed %u\n", __func__, speed); > + fsl->speed_hz = speed; > + > + __espi_set_speed(fsl); > + > + return 0; > +} > + > +static int fsl_espi_set_mode(struct udevice *bus, uint mode) { > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + debug("%s mode %u\n", __func__, mode); > + fsl->mode = mode; > + > + __espi_set_mode(fsl); > + > + return 0; > +} > + > +static int fsl_espi_child_pre_probe(struct udevice *dev) { > + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); > + struct udevice *bus = dev->parent; > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + debug("%s cs %u\n", __func__, slave_plat->cs); > + fsl->cs = slave_plat->cs; > + > + return 0; > +} > + > +static int fsl_espi_probe(struct udevice *bus) { > + struct fsl_espi_platdata *plat = dev_get_platdata(bus); > + struct fsl_spi_slave *fsl = dev_get_priv(bus); > + > + fsl->espi = (ccsr_espi_t *)((u32)plat->regs_addr); > + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > + fsl->speed_hz = plat->speed_hz; > + > + debug("%s probe done, bus-num %d.\n", bus->name, bus->seq); > + > + return 0; > +} > + > +static const struct dm_spi_ops fsl_espi_ops = { > + .claim_bus = fsl_espi_claim_bus, > + .release_bus = fsl_espi_release_bus, > + .xfer = fsl_espi_xfer, > + .set_speed = fsl_espi_set_speed, > + .set_mode = fsl_espi_set_mode, > +}; > + > +#if CONFIG_IS_ENABLED(OF_CONTROL) > && !CONFIG_IS_ENABLED(OF_PLATDATA) > +static int fsl_espi_ofdata_to_platdata(struct udevice *bus) { > + fdt_addr_t addr; > + struct fsl_espi_platdata *plat = bus->platdata; > + const void *blob = gd->fdt_blob; > + int node = dev_of_offset(bus); > + > + addr = dev_read_addr(bus); > + if (addr == FDT_ADDR_T_NONE) > + return -EINVAL; > + > + plat->regs_addr = lower_32_bits(addr); > + plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", > + FSL_ESPI_DEFAULT_SCK_FREQ); > + > + debug("ESPI: regs=%p, max-frequency=%d\n", > + &plat->regs_addr, plat->speed_hz); > + > + return 0; > +} > + > +static const struct udevice_id fsl_espi_ids[] = { > + { .compatible = "fsl,mpc8536-espi" }, > + { } > +}; > +#endif > + > +U_BOOT_DRIVER(fsl_espi) = { > + .name = "fsl_espi", > + .id = UCLASS_SPI, > +#if CONFIG_IS_ENABLED(OF_CONTROL) > && !CONFIG_IS_ENABLED(OF_PLATDATA) > + .of_match = fsl_espi_ids, > + .ofdata_to_platdata = fsl_espi_ofdata_to_platdata, #endif > + .ops = &fsl_espi_ops, > + .platdata_auto_alloc_size = sizeof(struct fsl_espi_platdata), > + .priv_auto_alloc_size = sizeof(struct fsl_spi_slave), > + .probe = fsl_espi_probe, > + .child_pre_probe = fsl_espi_child_pre_probe, }; #endif > diff --git a/include/dm/platform_data/fsl_espi.h > b/include/dm/platform_data/fsl_espi.h > new file mode 100644 > index 0000000000..e03cdb60c3 > --- /dev/null > +++ b/include/dm/platform_data/fsl_espi.h > @@ -0,0 +1,16 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright 2019 NXP > + */ > + > +#ifndef __fsl_espi_h > +#define __fsl_espi_h > + > +struct fsl_espi_platdata { > + uint flags; > + uint speed_hz; > + uint num_chipselect; > + fdt_addr_t regs_addr; > +}; > + > +#endif /* __fsl_espi_h */ > -- > 2.17.1
On Fri, Jun 21, 2019 at 7:52 AM Chuanhua Han <chuanhua.han@nxp.com> wrote: > > Modify the Freescale ESPI driver to support the driver model. > Also resolved the following problems: > > ===================== WARNING ====================== > This board does not use CONFIG_DM_SPI. Please update > the board before v2019.04 for no dm conversion > and v2019.07 for partially dm converted drivers. > Failure to update can lead to driver/board removal > See doc/driver-model/MIGRATION.txt for more info. > ==================================================== > ===================== WARNING ====================== > This board does not use CONFIG_DM_SPI_FLASH. Please update > the board to use CONFIG_SPI_FLASH before the v2019.07 release. > Failure to update by the deadline may result in board removal. > See doc/driver-model/MIGRATION.txt for more info. > ==================================================== > > Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> > --- > Changes in v4: > - Update copyright information. > - Move the fsl_espi_platdata data structure to the > include/dm/platform_data/. > - Merge the contents of the fsl_espi_priv structure into > the fsl_spi_slave structure. > - Implement the fsl_espi_set_speed function. > - Implement the fsl_espi_set_mode function. > - Implement the espi_release_bus function. > - Remove unwanted fsl_espi_bind functions. > - Implement the fsl_espi_child_pre_probe function as needed. > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA). > Changes in v3: > - Add a cover-letter for this patch set. > Changes in v2: > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > drivers/spi/fsl_espi.c | 444 ++++++++++++++++++++-------- > include/dm/platform_data/fsl_espi.h | 16 + > 2 files changed, 339 insertions(+), 121 deletions(-) > create mode 100644 include/dm/platform_data/fsl_espi.h > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c > index 7444ae1a06..849f65f0e6 100644 > --- a/drivers/spi/fsl_espi.c > +++ b/drivers/spi/fsl_espi.c > @@ -3,18 +3,25 @@ > * eSPI controller driver. > * > * Copyright 2010-2011 Freescale Semiconductor, Inc. > + * Copyright 2019 NXP > * Author: Mingkai Hu (Mingkai.hu@freescale.com) > + * Chuanhua Han (chuanhua.han@nxp.com) > */ > > #include <common.h> > - > #include <malloc.h> > #include <spi.h> > #include <asm/immap_85xx.h> > +#include <dm.h> > +#include <errno.h> > +#include <fdtdec.h> > +#include <dm/platform_data/fsl_espi.h> > > struct fsl_spi_slave { > struct spi_slave slave; > ccsr_espi_t *espi; > + u32 speed_hz; > + unsigned int cs; > unsigned int div16; > unsigned int pm; > int tx_timeout; > @@ -28,6 +35,9 @@ struct fsl_spi_slave { > #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) > #define US_PER_SECOND 1000000UL > > +/* default SCK frequency, unit: HZ */ > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 > + > #define ESPI_MAX_CS_NUM 4 > #define ESPI_FIFO_WIDTH_BIT 32 > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > - unsigned int max_hz, unsigned int mode) > -{ > - struct fsl_spi_slave *fsl; > - sys_info_t sysinfo; > - unsigned long spibrg = 0; > - unsigned long spi_freq = 0; > - unsigned char pm = 0; > - > - if (!spi_cs_is_valid(bus, cs)) > - return NULL; > - > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > - if (!fsl) > - return NULL; > - > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > - fsl->mode = mode; > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > - > - /* Set eSPI BRG clock source */ > - get_sys_info(&sysinfo); > - spibrg = sysinfo.freq_systembus / 2; > - fsl->div16 = 0; > - if ((spibrg / max_hz) > 32) { > - fsl->div16 = ESPI_CSMODE_DIV16; > - pm = spibrg / (max_hz * 16 * 2); > - if (pm > 16) { > - pm = 16; > - debug("Requested speed is too low: %d Hz, %ld Hz " > - "is used.\n", max_hz, spibrg / (32 * 16)); > - } > - } else > - pm = spibrg / (max_hz * 2); > - if (pm) > - pm--; > - fsl->pm = pm; > - > - if (fsl->div16) > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > - else > - spi_freq = spibrg / ((pm + 1) * 2); > - > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT > - * 10), spi_freq); > - > - return &fsl->slave; > -} > - > -void spi_free_slave(struct spi_slave *slave) > +void spi_cs_activate(struct spi_slave *slave) > { > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > - free(fsl); > + ccsr_espi_t *espi = fsl->espi; > + unsigned int com = 0; > + size_t data_len = fsl->data_len; > + uint cs; > +#ifndef CONFIG_DM_SPI > + cs = slave->cs; > +#else > + cs = fsl->cs; > +#endif Preserve cs in private struct and resuse it w/o this ifdef.
> -----Original Message----- > From: Jagan Teki <jagan@amarulasolutions.com> > Sent: 2019年8月14日 15:38 > To: Chuanhua Han <chuanhua.han@nxp.com> > Cc: Wolfgang Denk <wd@denx.de>; Shengzhou Liu <shengzhou.liu@nxp.com>; > Ruchika Gupta <ruchika.gupta@nxp.com>; Jagan Teki <jagan@openedev.com>; > Simon Glass <sjg@chromium.org>; Prabhakar Kushwaha > <prabhakar.kushwaha@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de> > Subject: [EXT] Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert Freescale ESPI > driver to driver model > > Caution: EXT Email > > On Fri, Jun 21, 2019 at 7:52 AM Chuanhua Han <chuanhua.han@nxp.com> > wrote: > > > > Modify the Freescale ESPI driver to support the driver model. > > Also resolved the following problems: > > > > ===================== WARNING ====================== This board > does > > not use CONFIG_DM_SPI. Please update the board before v2019.04 for no > > dm conversion and v2019.07 for partially dm converted drivers. > > Failure to update can lead to driver/board removal See > > doc/driver-model/MIGRATION.txt for more info. > > ==================================================== > > ===================== WARNING ====================== This board > does > > not use CONFIG_DM_SPI_FLASH. Please update the board to use > > CONFIG_SPI_FLASH before the v2019.07 release. > > Failure to update by the deadline may result in board removal. > > See doc/driver-model/MIGRATION.txt for more info. > > ==================================================== > > > > Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> > > --- > > Changes in v4: > > - Update copyright information. > > - Move the fsl_espi_platdata data structure to the > > include/dm/platform_data/. > > - Merge the contents of the fsl_espi_priv structure into the > > fsl_spi_slave structure. > > - Implement the fsl_espi_set_speed function. > > - Implement the fsl_espi_set_mode function. > > - Implement the espi_release_bus function. > > - Remove unwanted fsl_espi_bind functions. > > - Implement the fsl_espi_child_pre_probe function as needed. > > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) > && !CONFIG_IS_ENABLED(OF_PLATDATA). > > Changes in v3: > > - Add a cover-letter for this patch set. > > Changes in v2: > > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > > > drivers/spi/fsl_espi.c | 444 ++++++++++++++++++++-------- > > include/dm/platform_data/fsl_espi.h | 16 + > > 2 files changed, 339 insertions(+), 121 deletions(-) create mode > > 100644 include/dm/platform_data/fsl_espi.h > > > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index > > 7444ae1a06..849f65f0e6 100644 > > --- a/drivers/spi/fsl_espi.c > > +++ b/drivers/spi/fsl_espi.c > > @@ -3,18 +3,25 @@ > > * eSPI controller driver. > > * > > * Copyright 2010-2011 Freescale Semiconductor, Inc. > > + * Copyright 2019 NXP > > * Author: Mingkai Hu (Mingkai.hu@freescale.com) > > + * Chuanhua Han (chuanhua.han@nxp.com) > > */ > > > > #include <common.h> > > - > > #include <malloc.h> > > #include <spi.h> > > #include <asm/immap_85xx.h> > > +#include <dm.h> > > +#include <errno.h> > > +#include <fdtdec.h> > > +#include <dm/platform_data/fsl_espi.h> > > > > struct fsl_spi_slave { > > struct spi_slave slave; > > ccsr_espi_t *espi; > > + u32 speed_hz; > > + unsigned int cs; > > unsigned int div16; > > unsigned int pm; > > int tx_timeout; > > @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s) > > container_of(s, struct fsl_spi_slave, slave) > > #define US_PER_SECOND 1000000UL > > > > +/* default SCK frequency, unit: HZ */ > > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 > > + > > #define ESPI_MAX_CS_NUM 4 > > #define ESPI_FIFO_WIDTH_BIT 32 > > > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > > - unsigned int max_hz, unsigned int mode) > > -{ > > - struct fsl_spi_slave *fsl; > > - sys_info_t sysinfo; > > - unsigned long spibrg = 0; > > - unsigned long spi_freq = 0; > > - unsigned char pm = 0; > > - > > - if (!spi_cs_is_valid(bus, cs)) > > - return NULL; > > - > > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > > - if (!fsl) > > - return NULL; > > - > > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > > - fsl->mode = mode; > > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > > - > > - /* Set eSPI BRG clock source */ > > - get_sys_info(&sysinfo); > > - spibrg = sysinfo.freq_systembus / 2; > > - fsl->div16 = 0; > > - if ((spibrg / max_hz) > 32) { > > - fsl->div16 = ESPI_CSMODE_DIV16; > > - pm = spibrg / (max_hz * 16 * 2); > > - if (pm > 16) { > > - pm = 16; > > - debug("Requested speed is too low: %d Hz, %ld > Hz " > > - "is used.\n", max_hz, spibrg / (32 * 16)); > > - } > > - } else > > - pm = spibrg / (max_hz * 2); > > - if (pm) > > - pm--; > > - fsl->pm = pm; > > - > > - if (fsl->div16) > > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > > - else > > - spi_freq = spibrg / ((pm + 1) * 2); > > - > > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > ESPI_FIFO_WIDTH_BIT > > - * 10), spi_freq); > > - > > - return &fsl->slave; > > -} > > - > > -void spi_free_slave(struct spi_slave *slave) > > +void spi_cs_activate(struct spi_slave *slave) > > { > > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > > - free(fsl); > > + ccsr_espi_t *espi = fsl->espi; > > + unsigned int com = 0; > > + size_t data_len = fsl->data_len; > > + uint cs; > > +#ifndef CONFIG_DM_SPI > > + cs = slave->cs; > > +#else > > + cs = fsl->cs; > > +#endif > > Preserve cs in private struct and resuse it w/o this ifdef. What does that mean? Private data, do you mean struct spi_slave? What does w/o mean?
On Wed, Aug 14, 2019 at 3:31 PM Chuanhua Han <chuanhua.han@nxp.com> wrote: > > > > > -----Original Message----- > > From: Jagan Teki <jagan@amarulasolutions.com> > > Sent: 2019年8月14日 15:38 > > To: Chuanhua Han <chuanhua.han@nxp.com> > > Cc: Wolfgang Denk <wd@denx.de>; Shengzhou Liu <shengzhou.liu@nxp.com>; > > Ruchika Gupta <ruchika.gupta@nxp.com>; Jagan Teki <jagan@openedev.com>; > > Simon Glass <sjg@chromium.org>; Prabhakar Kushwaha > > <prabhakar.kushwaha@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de> > > Subject: [EXT] Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert Freescale ESPI > > driver to driver model > > > > Caution: EXT Email > > > > On Fri, Jun 21, 2019 at 7:52 AM Chuanhua Han <chuanhua.han@nxp.com> > > wrote: > > > > > > Modify the Freescale ESPI driver to support the driver model. > > > Also resolved the following problems: > > > > > > ===================== WARNING ====================== This board > > does > > > not use CONFIG_DM_SPI. Please update the board before v2019.04 for no > > > dm conversion and v2019.07 for partially dm converted drivers. > > > Failure to update can lead to driver/board removal See > > > doc/driver-model/MIGRATION.txt for more info. > > > ==================================================== > > > ===================== WARNING ====================== This board > > does > > > not use CONFIG_DM_SPI_FLASH. Please update the board to use > > > CONFIG_SPI_FLASH before the v2019.07 release. > > > Failure to update by the deadline may result in board removal. > > > See doc/driver-model/MIGRATION.txt for more info. > > > ==================================================== > > > > > > Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> > > > --- > > > Changes in v4: > > > - Update copyright information. > > > - Move the fsl_espi_platdata data structure to the > > > include/dm/platform_data/. > > > - Merge the contents of the fsl_espi_priv structure into the > > > fsl_spi_slave structure. > > > - Implement the fsl_espi_set_speed function. > > > - Implement the fsl_espi_set_mode function. > > > - Implement the espi_release_bus function. > > > - Remove unwanted fsl_espi_bind functions. > > > - Implement the fsl_espi_child_pre_probe function as needed. > > > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) > > && !CONFIG_IS_ENABLED(OF_PLATDATA). > > > Changes in v3: > > > - Add a cover-letter for this patch set. > > > Changes in v2: > > > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > > > > > drivers/spi/fsl_espi.c | 444 ++++++++++++++++++++-------- > > > include/dm/platform_data/fsl_espi.h | 16 + > > > 2 files changed, 339 insertions(+), 121 deletions(-) create mode > > > 100644 include/dm/platform_data/fsl_espi.h > > > > > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index > > > 7444ae1a06..849f65f0e6 100644 > > > --- a/drivers/spi/fsl_espi.c > > > +++ b/drivers/spi/fsl_espi.c > > > @@ -3,18 +3,25 @@ > > > * eSPI controller driver. > > > * > > > * Copyright 2010-2011 Freescale Semiconductor, Inc. > > > + * Copyright 2019 NXP > > > * Author: Mingkai Hu (Mingkai.hu@freescale.com) > > > + * Chuanhua Han (chuanhua.han@nxp.com) > > > */ > > > > > > #include <common.h> > > > - > > > #include <malloc.h> > > > #include <spi.h> > > > #include <asm/immap_85xx.h> > > > +#include <dm.h> > > > +#include <errno.h> > > > +#include <fdtdec.h> > > > +#include <dm/platform_data/fsl_espi.h> > > > > > > struct fsl_spi_slave { > > > struct spi_slave slave; > > > ccsr_espi_t *espi; > > > + u32 speed_hz; > > > + unsigned int cs; > > > unsigned int div16; > > > unsigned int pm; > > > int tx_timeout; > > > @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s) > > > container_of(s, struct fsl_spi_slave, slave) > > > #define US_PER_SECOND 1000000UL > > > > > > +/* default SCK frequency, unit: HZ */ > > > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 > > > + > > > #define ESPI_MAX_CS_NUM 4 > > > #define ESPI_FIFO_WIDTH_BIT 32 > > > > > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > > > > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > > > > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > > > - unsigned int max_hz, unsigned int mode) > > > -{ > > > - struct fsl_spi_slave *fsl; > > > - sys_info_t sysinfo; > > > - unsigned long spibrg = 0; > > > - unsigned long spi_freq = 0; > > > - unsigned char pm = 0; > > > - > > > - if (!spi_cs_is_valid(bus, cs)) > > > - return NULL; > > > - > > > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > > > - if (!fsl) > > > - return NULL; > > > - > > > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > > > - fsl->mode = mode; > > > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > > > - > > > - /* Set eSPI BRG clock source */ > > > - get_sys_info(&sysinfo); > > > - spibrg = sysinfo.freq_systembus / 2; > > > - fsl->div16 = 0; > > > - if ((spibrg / max_hz) > 32) { > > > - fsl->div16 = ESPI_CSMODE_DIV16; > > > - pm = spibrg / (max_hz * 16 * 2); > > > - if (pm > 16) { > > > - pm = 16; > > > - debug("Requested speed is too low: %d Hz, %ld > > Hz " > > > - "is used.\n", max_hz, spibrg / (32 * 16)); > > > - } > > > - } else > > > - pm = spibrg / (max_hz * 2); > > > - if (pm) > > > - pm--; > > > - fsl->pm = pm; > > > - > > > - if (fsl->div16) > > > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > > > - else > > > - spi_freq = spibrg / ((pm + 1) * 2); > > > - > > > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > > > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > > ESPI_FIFO_WIDTH_BIT > > > - * 10), spi_freq); > > > - > > > - return &fsl->slave; > > > -} > > > - > > > -void spi_free_slave(struct spi_slave *slave) > > > +void spi_cs_activate(struct spi_slave *slave) > > > { > > > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > > > - free(fsl); > > > + ccsr_espi_t *espi = fsl->espi; > > > + unsigned int com = 0; > > > + size_t data_len = fsl->data_len; > > > + uint cs; > > > +#ifndef CONFIG_DM_SPI > > > + cs = slave->cs; > > > +#else > > > + cs = fsl->cs; > > > +#endif > > > > Preserve cs in private struct and resuse it w/o this ifdef. > What does that mean? Private data, do you mean struct spi_slave? What does w/o mean? Add cs variable in struct and assign it in dm and non-dm codes.
> -----Original Message----- > From: Jagan Teki <jagan@amarulasolutions.com> > Sent: 2019年8月15日 2:03 > To: Chuanhua Han <chuanhua.han@nxp.com> > Cc: Wolfgang Denk <wd@denx.de>; Shengzhou Liu <shengzhou.liu@nxp.com>; > Ruchika Gupta <ruchika.gupta@nxp.com>; Jagan Teki <jagan@openedev.com>; > Simon Glass <sjg@chromium.org>; Prabhakar Kushwaha > <prabhakar.kushwaha@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de>; > Xiaowei Bao <xiaowei.bao@nxp.com> > Subject: Re: [EXT] Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert Freescale ESPI > driver to driver model > > Caution: EXT Email > > On Wed, Aug 14, 2019 at 3:31 PM Chuanhua Han <chuanhua.han@nxp.com> > wrote: > > > > > > > > > -----Original Message----- > > > From: Jagan Teki <jagan@amarulasolutions.com> > > > Sent: 2019年8月14日 15:38 > > > To: Chuanhua Han <chuanhua.han@nxp.com> > > > Cc: Wolfgang Denk <wd@denx.de>; Shengzhou Liu > > > <shengzhou.liu@nxp.com>; Ruchika Gupta <ruchika.gupta@nxp.com>; > > > Jagan Teki <jagan@openedev.com>; Simon Glass <sjg@chromium.org>; > > > Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>; U-Boot-Denx > > > <u-boot@lists.denx.de> > > > Subject: [EXT] Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert > > > Freescale ESPI driver to driver model > > > > > > Caution: EXT Email > > > > > > On Fri, Jun 21, 2019 at 7:52 AM Chuanhua Han <chuanhua.han@nxp.com> > > > wrote: > > > > > > > > Modify the Freescale ESPI driver to support the driver model. > > > > Also resolved the following problems: > > > > > > > > ===================== WARNING ====================== This > board > > > does > > > > not use CONFIG_DM_SPI. Please update the board before v2019.04 for > > > > no dm conversion and v2019.07 for partially dm converted drivers. > > > > Failure to update can lead to driver/board removal See > > > > doc/driver-model/MIGRATION.txt for more info. > > > > ==================================================== > > > > ===================== WARNING ====================== This > board > > > does > > > > not use CONFIG_DM_SPI_FLASH. Please update the board to use > > > > CONFIG_SPI_FLASH before the v2019.07 release. > > > > Failure to update by the deadline may result in board removal. > > > > See doc/driver-model/MIGRATION.txt for more info. > > > > ==================================================== > > > > > > > > Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> > > > > --- > > > > Changes in v4: > > > > - Update copyright information. > > > > - Move the fsl_espi_platdata data structure to the > > > > include/dm/platform_data/. > > > > - Merge the contents of the fsl_espi_priv structure into > > > > the fsl_spi_slave structure. > > > > - Implement the fsl_espi_set_speed function. > > > > - Implement the fsl_espi_set_mode function. > > > > - Implement the espi_release_bus function. > > > > - Remove unwanted fsl_espi_bind functions. > > > > - Implement the fsl_espi_child_pre_probe function as needed. > > > > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) > > > && !CONFIG_IS_ENABLED(OF_PLATDATA). > > > > Changes in v3: > > > > - Add a cover-letter for this patch set. > > > > Changes in v2: > > > > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > > > > > > > drivers/spi/fsl_espi.c | 444 > ++++++++++++++++++++-------- > > > > include/dm/platform_data/fsl_espi.h | 16 + > > > > 2 files changed, 339 insertions(+), 121 deletions(-) create mode > > > > 100644 include/dm/platform_data/fsl_espi.h > > > > > > > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index > > > > 7444ae1a06..849f65f0e6 100644 > > > > --- a/drivers/spi/fsl_espi.c > > > > +++ b/drivers/spi/fsl_espi.c > > > > @@ -3,18 +3,25 @@ > > > > * eSPI controller driver. > > > > * > > > > * Copyright 2010-2011 Freescale Semiconductor, Inc. > > > > + * Copyright 2019 NXP > > > > * Author: Mingkai Hu (Mingkai.hu@freescale.com) > > > > + * Chuanhua Han (chuanhua.han@nxp.com) > > > > */ > > > > > > > > #include <common.h> > > > > - > > > > #include <malloc.h> > > > > #include <spi.h> > > > > #include <asm/immap_85xx.h> > > > > +#include <dm.h> > > > > +#include <errno.h> > > > > +#include <fdtdec.h> > > > > +#include <dm/platform_data/fsl_espi.h> > > > > > > > > struct fsl_spi_slave { > > > > struct spi_slave slave; > > > > ccsr_espi_t *espi; > > > > + u32 speed_hz; > > > > + unsigned int cs; > > > > unsigned int div16; > > > > unsigned int pm; > > > > int tx_timeout; > > > > @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define > > > > to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) > > > > #define US_PER_SECOND 1000000UL > > > > > > > > +/* default SCK frequency, unit: HZ */ > > > > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 > > > > + > > > > #define ESPI_MAX_CS_NUM 4 > > > > #define ESPI_FIFO_WIDTH_BIT 32 > > > > > > > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > > > > > > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > > > > > > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > > > > - unsigned int max_hz, unsigned int mode) > > > > -{ > > > > - struct fsl_spi_slave *fsl; > > > > - sys_info_t sysinfo; > > > > - unsigned long spibrg = 0; > > > > - unsigned long spi_freq = 0; > > > > - unsigned char pm = 0; > > > > - > > > > - if (!spi_cs_is_valid(bus, cs)) > > > > - return NULL; > > > > - > > > > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > > > > - if (!fsl) > > > > - return NULL; > > > > - > > > > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > > > > - fsl->mode = mode; > > > > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > > > > - > > > > - /* Set eSPI BRG clock source */ > > > > - get_sys_info(&sysinfo); > > > > - spibrg = sysinfo.freq_systembus / 2; > > > > - fsl->div16 = 0; > > > > - if ((spibrg / max_hz) > 32) { > > > > - fsl->div16 = ESPI_CSMODE_DIV16; > > > > - pm = spibrg / (max_hz * 16 * 2); > > > > - if (pm > 16) { > > > > - pm = 16; > > > > - debug("Requested speed is too low: %d > Hz, %ld > > > Hz " > > > > - "is used.\n", max_hz, spibrg / (32 * > 16)); > > > > - } > > > > - } else > > > > - pm = spibrg / (max_hz * 2); > > > > - if (pm) > > > > - pm--; > > > > - fsl->pm = pm; > > > > - > > > > - if (fsl->div16) > > > > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > > > > - else > > > > - spi_freq = spibrg / ((pm + 1) * 2); > > > > - > > > > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > > > > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > > > ESPI_FIFO_WIDTH_BIT > > > > - * 10), spi_freq); > > > > - > > > > - return &fsl->slave; > > > > -} > > > > - > > > > -void spi_free_slave(struct spi_slave *slave) > > > > +void spi_cs_activate(struct spi_slave *slave) > > > > { > > > > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); > > > > - free(fsl); > > > > + ccsr_espi_t *espi = fsl->espi; > > > > + unsigned int com = 0; > > > > + size_t data_len = fsl->data_len; > > > > + uint cs; > > > > +#ifndef CONFIG_DM_SPI > > > > + cs = slave->cs; > > > > +#else > > > > + cs = fsl->cs; > > > > +#endif > > > > > > Preserve cs in private struct and resuse it w/o this ifdef. > > What does that mean? Private data, do you mean struct spi_slave? What does > w/o mean? > > Add cs variable in struct and assign it in dm and non-dm codes. Struct fsl_spi_slave structures already contain cs variables, and cs values have been obtained earlier, which can be directly applied later
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index 7444ae1a06..849f65f0e6 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -3,18 +3,25 @@ * eSPI controller driver. * * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Copyright 2019 NXP * Author: Mingkai Hu (Mingkai.hu@freescale.com) + * Chuanhua Han (chuanhua.han@nxp.com) */ #include <common.h> - #include <malloc.h> #include <spi.h> #include <asm/immap_85xx.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <dm/platform_data/fsl_espi.h> struct fsl_spi_slave { struct spi_slave slave; ccsr_espi_t *espi; + u32 speed_hz; + unsigned int cs; unsigned int div16; unsigned int pm; int tx_timeout; @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) #define US_PER_SECOND 1000000UL +/* default SCK frequency, unit: HZ */ +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 + #define ESPI_MAX_CS_NUM 4 #define ESPI_FIFO_WIDTH_BIT 32 @@ -62,116 +72,32 @@ struct fsl_spi_slave { #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct fsl_spi_slave *fsl; - sys_info_t sysinfo; - unsigned long spibrg = 0; - unsigned long spi_freq = 0; - unsigned char pm = 0; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); - if (!fsl) - return NULL; - - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); - fsl->mode = mode; - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; - - /* Set eSPI BRG clock source */ - get_sys_info(&sysinfo); - spibrg = sysinfo.freq_systembus / 2; - fsl->div16 = 0; - if ((spibrg / max_hz) > 32) { - fsl->div16 = ESPI_CSMODE_DIV16; - pm = spibrg / (max_hz * 16 * 2); - if (pm > 16) { - pm = 16; - debug("Requested speed is too low: %d Hz, %ld Hz " - "is used.\n", max_hz, spibrg / (32 * 16)); - } - } else - pm = spibrg / (max_hz * 2); - if (pm) - pm--; - fsl->pm = pm; - - if (fsl->div16) - spi_freq = spibrg / ((pm + 1) * 2 * 16); - else - spi_freq = spibrg / ((pm + 1) * 2); - - /* set tx_timeout to 10 times of one espi FIFO entry go out */ - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT - * 10), spi_freq); - - return &fsl->slave; -} - -void spi_free_slave(struct spi_slave *slave) +void spi_cs_activate(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - free(fsl); + ccsr_espi_t *espi = fsl->espi; + unsigned int com = 0; + size_t data_len = fsl->data_len; + uint cs; +#ifndef CONFIG_DM_SPI + cs = slave->cs; +#else + cs = fsl->cs; +#endif + com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); + com |= ESPI_COM_CS(cs); + com |= ESPI_COM_TRANLEN(data_len - 1); + out_be32(&espi->com, com); } -int spi_claim_bus(struct spi_slave *slave) +void spi_cs_deactivate(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); ccsr_espi_t *espi = fsl->espi; - unsigned char pm = fsl->pm; - unsigned int cs = slave->cs; - unsigned int mode = fsl->mode; - unsigned int div16 = fsl->div16; - int i; - - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); - - /* Enable eSPI interface */ - out_be32(&espi->mode, ESPI_MODE_RXTHR(3) - | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); - - out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ - out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ - - /* Init CS mode interface */ - for (i = 0; i < ESPI_MAX_CS_NUM; i++) - out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); - - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & - ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 - | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK - | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); - - /* Set eSPI BRG clock source */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_PM(pm) | div16); - - /* Set eSPI mode */ - if (mode & SPI_CPHA) - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_CP_BEGIN_EDGCLK); - if (mode & SPI_CPOL) - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_CI_INACTIVEHIGH); - - /* Character bit order: msb first */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_REV_MSB_FIRST); - - /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_LEN(7)); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ + /* clear the RXCNT and TXCNT */ + out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); + out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); } static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) @@ -204,7 +130,8 @@ static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) debug("***spi_xfer:...Tx timeout! event = %08x\n", event); } -static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes) +static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, + unsigned int bytes) { ccsr_espi_t *espi = fsl->espi; unsigned int tmpdin, rx_times; @@ -236,10 +163,17 @@ static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes) return bytes; } -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, - void *data_in, unsigned long flags) +void espi_release_bus(struct fsl_spi_slave *fsl) { - struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + /* Disable the SPI hardware */ + out_be32(&fsl->espi->mode, + in_be32(&fsl->espi->mode) & (~ESPI_MODE_EN)); +} + +int espi_xfer(struct fsl_spi_slave *fsl, uint cs, unsigned int bitlen, + const void *data_out, void *data_in, unsigned long flags) +{ + struct spi_slave *slave = &fsl->slave; ccsr_espi_t *espi = fsl->espi; unsigned int event, rx_bytes; const void *dout = NULL; @@ -258,7 +192,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, max_tran_len = fsl->max_transfer_length; switch (flags) { case SPI_XFER_BEGIN: - cmd_len = fsl->cmd_len = data_len; + cmd_len = data_len; + fsl->cmd_len = cmd_len; memcpy(cmd_buf, data_out, cmd_len); return 0; case 0: @@ -354,30 +289,297 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, return 0; } +void espi_claim_bus(struct fsl_spi_slave *fsl, unsigned int cs) +{ + ccsr_espi_t *espi = fsl->espi; + unsigned char pm = fsl->pm; + unsigned int mode = fsl->mode; + unsigned int div16 = fsl->div16; + int i; + + /* Enable eSPI interface */ + out_be32(&espi->mode, ESPI_MODE_RXTHR(3) + | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); + + out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ + out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ + + /* Init CS mode interface */ + for (i = 0; i < ESPI_MAX_CS_NUM; i++) + out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); + + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & + ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 + | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK + | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); + + /* Set eSPI BRG clock source */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_PM(pm) | div16); + + /* Set eSPI mode */ + if (mode & SPI_CPHA) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_CP_BEGIN_EDGCLK); + if (mode & SPI_CPOL) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_CI_INACTIVEHIGH); + + /* Character bit order: msb first */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_REV_MSB_FIRST); + + /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_LEN(7)); +} + +void espi_setup_slave(struct fsl_spi_slave *fsl) +{ + unsigned int max_hz; + sys_info_t sysinfo; + unsigned long spibrg = 0; + unsigned long spi_freq = 0; + unsigned char pm = 0; + + max_hz = fsl->speed_hz; + + get_sys_info(&sysinfo); + spibrg = sysinfo.freq_systembus / 2; + fsl->div16 = 0; + if ((spibrg / max_hz) > 32) { + fsl->div16 = ESPI_CSMODE_DIV16; + pm = spibrg / (max_hz * 16 * 2); + if (pm > 16) { + pm = 16; + debug("max_hz is too low: %d Hz, %ld Hz is used.\n", + max_hz, spibrg / (32 * 16)); + } + } else { + pm = spibrg / (max_hz * 2); + } + if (pm) + pm--; + fsl->pm = pm; + + if (fsl->div16) + spi_freq = spibrg / ((pm + 1) * 2 * 16); + else + spi_freq = spibrg / ((pm + 1) * 2); + + /* set tx_timeout to 10 times of one espi FIFO entry go out */ + fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT + * 10), spi_freq);/* Set eSPI BRG clock source */ +} + +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs < ESPI_MAX_CS_NUM; } -void spi_cs_activate(struct spi_slave *slave) +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct fsl_spi_slave *fsl; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); + if (!fsl) + return NULL; + + fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + fsl->mode = mode; + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; + fsl->speed_hz = max_hz; + + espi_setup_slave(fsl); + + return &fsl->slave; +} + +void spi_free_slave(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = fsl->espi; - unsigned int com = 0; - size_t data_len = fsl->data_len; - com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); - com |= ESPI_COM_CS(slave->cs); - com |= ESPI_COM_TRANLEN(data_len - 1); - out_be32(&espi->com, com); + free(fsl); } -void spi_cs_deactivate(struct spi_slave *slave) +int spi_claim_bus(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = fsl->espi; - /* clear the RXCNT and TXCNT */ - out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); - out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); + espi_claim_bus(fsl, slave->cs); + + return 0; } + +void spi_release_bus(struct spi_slave *slave) +{ + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + + espi_release_bus(fsl); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct fsl_spi_slave *fsl = (struct fsl_spi_slave *)slave; + + return espi_xfer(fsl, slave->cs, bitlen, dout, din, flags); +} +#else +static void __espi_set_speed(struct fsl_spi_slave *fsl) +{ + espi_setup_slave(fsl); + + /* Set eSPI BRG clock source */ + out_be32(&fsl->espi->csmode[fsl->cs], + in_be32(&fsl->espi->csmode[fsl->cs]) + | ESPI_CSMODE_PM(fsl->pm) | fsl->div16); +} + +static void __espi_set_mode(struct fsl_spi_slave *fsl) +{ + /* Set eSPI mode */ + if (fsl->mode & SPI_CPHA) + out_be32(&fsl->espi->csmode[fsl->cs], + in_be32(&fsl->espi->csmode[fsl->cs]) + | ESPI_CSMODE_CP_BEGIN_EDGCLK); + if (fsl->mode & SPI_CPOL) + out_be32(&fsl->espi->csmode[fsl->cs], + in_be32(&fsl->espi->csmode[fsl->cs]) + | ESPI_CSMODE_CI_INACTIVEHIGH); +} + +static int fsl_espi_claim_bus(struct udevice *dev) +{ + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + espi_claim_bus(fsl, fsl->cs); + + return 0; +} + +static int fsl_espi_release_bus(struct udevice *dev) +{ + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + espi_release_bus(fsl); + + return 0; +} + +static int fsl_espi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + return espi_xfer(fsl, fsl->cs, bitlen, dout, din, flags); +} + +static int fsl_espi_set_speed(struct udevice *bus, uint speed) +{ + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + debug("%s speed %u\n", __func__, speed); + fsl->speed_hz = speed; + + __espi_set_speed(fsl); + + return 0; +} + +static int fsl_espi_set_mode(struct udevice *bus, uint mode) +{ + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + debug("%s mode %u\n", __func__, mode); + fsl->mode = mode; + + __espi_set_mode(fsl); + + return 0; +} + +static int fsl_espi_child_pre_probe(struct udevice *dev) +{ + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + struct udevice *bus = dev->parent; + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + debug("%s cs %u\n", __func__, slave_plat->cs); + fsl->cs = slave_plat->cs; + + return 0; +} + +static int fsl_espi_probe(struct udevice *bus) +{ + struct fsl_espi_platdata *plat = dev_get_platdata(bus); + struct fsl_spi_slave *fsl = dev_get_priv(bus); + + fsl->espi = (ccsr_espi_t *)((u32)plat->regs_addr); + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; + fsl->speed_hz = plat->speed_hz; + + debug("%s probe done, bus-num %d.\n", bus->name, bus->seq); + + return 0; +} + +static const struct dm_spi_ops fsl_espi_ops = { + .claim_bus = fsl_espi_claim_bus, + .release_bus = fsl_espi_release_bus, + .xfer = fsl_espi_xfer, + .set_speed = fsl_espi_set_speed, + .set_mode = fsl_espi_set_mode, +}; + +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) +static int fsl_espi_ofdata_to_platdata(struct udevice *bus) +{ + fdt_addr_t addr; + struct fsl_espi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = dev_of_offset(bus); + + addr = dev_read_addr(bus); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + plat->regs_addr = lower_32_bits(addr); + plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", + FSL_ESPI_DEFAULT_SCK_FREQ); + + debug("ESPI: regs=%p, max-frequency=%d\n", + &plat->regs_addr, plat->speed_hz); + + return 0; +} + +static const struct udevice_id fsl_espi_ids[] = { + { .compatible = "fsl,mpc8536-espi" }, + { } +}; +#endif + +U_BOOT_DRIVER(fsl_espi) = { + .name = "fsl_espi", + .id = UCLASS_SPI, +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) + .of_match = fsl_espi_ids, + .ofdata_to_platdata = fsl_espi_ofdata_to_platdata, +#endif + .ops = &fsl_espi_ops, + .platdata_auto_alloc_size = sizeof(struct fsl_espi_platdata), + .priv_auto_alloc_size = sizeof(struct fsl_spi_slave), + .probe = fsl_espi_probe, + .child_pre_probe = fsl_espi_child_pre_probe, +}; +#endif diff --git a/include/dm/platform_data/fsl_espi.h b/include/dm/platform_data/fsl_espi.h new file mode 100644 index 0000000000..e03cdb60c3 --- /dev/null +++ b/include/dm/platform_data/fsl_espi.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __fsl_espi_h +#define __fsl_espi_h + +struct fsl_espi_platdata { + uint flags; + uint speed_hz; + uint num_chipselect; + fdt_addr_t regs_addr; +}; + +#endif /* __fsl_espi_h */
Modify the Freescale ESPI driver to support the driver model. Also resolved the following problems: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no dm conversion and v2019.07 for partially dm converted drivers. Failure to update can lead to driver/board removal See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> --- Changes in v4: - Update copyright information. - Move the fsl_espi_platdata data structure to the include/dm/platform_data/. - Merge the contents of the fsl_espi_priv structure into the fsl_spi_slave structure. - Implement the fsl_espi_set_speed function. - Implement the fsl_espi_set_mode function. - Implement the espi_release_bus function. - Remove unwanted fsl_espi_bind functions. - Implement the fsl_espi_child_pre_probe function as needed. - Use #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA). Changes in v3: - Add a cover-letter for this patch set. Changes in v2: - The fsl_espi driver support both OF_CONTROL and PLATDATA. drivers/spi/fsl_espi.c | 444 ++++++++++++++++++++-------- include/dm/platform_data/fsl_espi.h | 16 + 2 files changed, 339 insertions(+), 121 deletions(-) create mode 100644 include/dm/platform_data/fsl_espi.h