| Message ID | 20190509105746.24830-3-jagan@amarulasolutions.com |
|---|---|
| State | Superseded |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | [U-Boot,1/3] rk3399: orangepi: Enable TPL | expand |
Hi Jagan, On 05/09/2019 06:57 PM, Jagan Teki wrote: > This patch add documentation for TPL build and flashing steps > for rk3399 boards. > > Add full boot log for future reference. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > doc/README.rockchip | 51 ++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 50 insertions(+), 1 deletion(-) > > diff --git a/doc/README.rockchip b/doc/README.rockchip > index ca4d6473b0..264f7e4994 100644 > --- a/doc/README.rockchip > +++ b/doc/README.rockchip > @@ -173,7 +173,10 @@ For example: > => make u-boot.itb > > (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get > - spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL) > + spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL > + > + If TPL enabled on the target, get tpl/u-boot-tpl-dtb.bin or tpl/u-boot-tpl.bin > + if CONFIG_TPL_OF_CONTROL not enabled) > > Writing to the board with USB > ============================= > @@ -455,6 +458,52 @@ Net: eth0: ethernet@fe300000 > Hit any key to stop autoboot: 0 > => > > +Option 3: Package the image with TPL: > + > + - Prefix rk3399 header to TPL image > + > + => cd /path/to/u-boot > + => ./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out > + > + - Concatinate tpl with spl > + > + => cd /path/to/u-boot > + => cat ./spl/u-boot-spl-dtb.bin >> out > + > + - Write tpl+spl at 64th sector > + > + => sudo dd if=out of=/dev/sdc seek=64 > + > + - Write U-Boot proper at 16384 sector > + > + => sudo dd if=u-boot.itb of=/dev/sdc seek=16384 > + => sync > + > +Put this SD (or micro-SD) card into your board and reset it. You should see > +something like: > + > +U-Boot TPL board init > +Trying to boot from BOOTROM > +Returning to boot ROM... > + > +U-Boot SPL board init > +Trying to boot from MMC1 > + > + > +U-Boot 2019.07-rc1-00241-g5b3244767a (May 08 2019 - 10:51:06 +0530) > + > +Model: Orange Pi RK3399 Board > +DRAM: 2 GiB > +MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0 > +Loading Environment from MMC... OK > +In: serial@ff1a0000 > +Out: serial@ff1a0000 > +Err: serial@ff1a0000 > +Model: Orange Pi RK3399 Board > +Net: eth0: ethernet@fe300000 > +Hit any key to stop autoboot: 0 > +=> > + > Using fastboot on rk3288 > ======================== > - Write GPT partition layout to mmc device which fastboot want to use it to
On 05/29/2019 04:02 PM, Kever Yang wrote: > Hi Jagan, > > > On 05/09/2019 06:57 PM, Jagan Teki wrote: >> This patch add documentation for TPL build and flashing steps >> for rk3399 boards. >> >> Add full boot log for future reference. >> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Applied to u-boot-rockchip/master, thanks! > > Thanks, > - Kever >> --- >> doc/README.rockchip | 51 ++++++++++++++++++++++++++++++++++++++++++++- >> 1 file changed, 50 insertions(+), 1 deletion(-) >> >> diff --git a/doc/README.rockchip b/doc/README.rockchip >> index ca4d6473b0..264f7e4994 100644 >> --- a/doc/README.rockchip >> +++ b/doc/README.rockchip >> @@ -173,7 +173,10 @@ For example: >> => make u-boot.itb >> >> (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get >> - spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL) >> + spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL >> + >> + If TPL enabled on the target, get tpl/u-boot-tpl-dtb.bin or tpl/u-boot-tpl.bin >> + if CONFIG_TPL_OF_CONTROL not enabled) >> >> Writing to the board with USB >> ============================= >> @@ -455,6 +458,52 @@ Net: eth0: ethernet@fe300000 >> Hit any key to stop autoboot: 0 >> => >> >> +Option 3: Package the image with TPL: >> + >> + - Prefix rk3399 header to TPL image >> + >> + => cd /path/to/u-boot >> + => ./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out >> + >> + - Concatinate tpl with spl >> + >> + => cd /path/to/u-boot >> + => cat ./spl/u-boot-spl-dtb.bin >> out >> + >> + - Write tpl+spl at 64th sector >> + >> + => sudo dd if=out of=/dev/sdc seek=64 >> + >> + - Write U-Boot proper at 16384 sector >> + >> + => sudo dd if=u-boot.itb of=/dev/sdc seek=16384 >> + => sync >> + >> +Put this SD (or micro-SD) card into your board and reset it. You should see >> +something like: >> + >> +U-Boot TPL board init >> +Trying to boot from BOOTROM >> +Returning to boot ROM... >> + >> +U-Boot SPL board init >> +Trying to boot from MMC1 >> + >> + >> +U-Boot 2019.07-rc1-00241-g5b3244767a (May 08 2019 - 10:51:06 +0530) >> + >> +Model: Orange Pi RK3399 Board >> +DRAM: 2 GiB >> +MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0 >> +Loading Environment from MMC... OK >> +In: serial@ff1a0000 >> +Out: serial@ff1a0000 >> +Err: serial@ff1a0000 >> +Model: Orange Pi RK3399 Board >> +Net: eth0: ethernet@fe300000 >> +Hit any key to stop autoboot: 0 >> +=> >> + >> Using fastboot on rk3288 >> ======================== >> - Write GPT partition layout to mmc device which fastboot want to use it to > > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip >
diff --git a/doc/README.rockchip b/doc/README.rockchip index ca4d6473b0..264f7e4994 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -173,7 +173,10 @@ For example: => make u-boot.itb (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get - spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL) + spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL + + If TPL enabled on the target, get tpl/u-boot-tpl-dtb.bin or tpl/u-boot-tpl.bin + if CONFIG_TPL_OF_CONTROL not enabled) Writing to the board with USB ============================= @@ -455,6 +458,52 @@ Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 => +Option 3: Package the image with TPL: + + - Prefix rk3399 header to TPL image + + => cd /path/to/u-boot + => ./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out + + - Concatinate tpl with spl + + => cd /path/to/u-boot + => cat ./spl/u-boot-spl-dtb.bin >> out + + - Write tpl+spl at 64th sector + + => sudo dd if=out of=/dev/sdc seek=64 + + - Write U-Boot proper at 16384 sector + + => sudo dd if=u-boot.itb of=/dev/sdc seek=16384 + => sync + +Put this SD (or micro-SD) card into your board and reset it. You should see +something like: + +U-Boot TPL board init +Trying to boot from BOOTROM +Returning to boot ROM... + +U-Boot SPL board init +Trying to boot from MMC1 + + +U-Boot 2019.07-rc1-00241-g5b3244767a (May 08 2019 - 10:51:06 +0530) + +Model: Orange Pi RK3399 Board +DRAM: 2 GiB +MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0 +Loading Environment from MMC... OK +In: serial@ff1a0000 +Out: serial@ff1a0000 +Err: serial@ff1a0000 +Model: Orange Pi RK3399 Board +Net: eth0: ethernet@fe300000 +Hit any key to stop autoboot: 0 +=> + Using fastboot on rk3288 ======================== - Write GPT partition layout to mmc device which fastboot want to use it to
This patch add documentation for TPL build and flashing steps for rk3399 boards. Add full boot log for future reference. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- doc/README.rockchip | 51 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-)