diff mbox series

[U-Boot,u-boot-marvell,v2,04/15] arm: mvebu: turris_omnia: remove legacy macros from board header

Message ID 20190430014825.30553-5-marek.behun@nic.cz
State Superseded
Delegated to: Stefan Roese
Headers show
Series Fixes for Turris Omnia | expand

Commit Message

Marek Behún April 30, 2019, 1:48 a.m. UTC 
These are not needed if MMC and SCSI DM drivers are used.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
 include/configs/turris_omnia.h | 14 --------------
 1 file changed, 14 deletions(-)

Comments

Stefan Roese May 2, 2019, 6:02 a.m. UTC | #1 
On 30.04.19 03:48, Marek Behún wrote:
> These are not needed if MMC and SCSI DM drivers are used.
> 
> Signed-off-by: Marek Behún <marek.behun@nic.cz>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan
diff mbox series

Patch

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 0e65a12345..5e692e6829 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -29,20 +29,6 @@ 
 #define CONFIG_SPL_I2C_MUX
 #define CONFIG_SYS_I2C_MVTWSI
 
-/*
- * SDIO/MMC Card Configuration
- */
-#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
-
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
-
 /* USB/EHCI configuration */
 #define CONFIG_EHCI_IS_TDI