diff mbox series

[U-Boot,v5,26/27] ARM: tegra: Mark built-in Ethernet as default on Jetson TX2

Message ID 20190415093239.27509-27-thierry.reding@gmail.com
State Accepted
Commit 879a3bc1c2f3e2aadd6f05e6427cf4d97a272f9a
Delegated to: Tom Warren
Headers show
Series ARM: tegra: Miscalleneous improvements | expand

Commit Message

Thierry Reding April 15, 2019, 9:32 a.m. UTC 
From: Thierry Reding <treding@nvidia.com>

Add an "ethernet" alias that points to the default network interface,
which is the built-in EQoS on Jetson TX2.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 arch/arm/dts/tegra186-p2771-0000.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/dts/tegra186-p2771-0000.dtsi b/arch/arm/dts/tegra186-p2771-0000.dtsi
index a1319dc4936f..7cda0b41f74b 100644
--- a/arch/arm/dts/tegra186-p2771-0000.dtsi
+++ b/arch/arm/dts/tegra186-p2771-0000.dtsi
@@ -9,6 +9,7 @@ 
 	};
 
 	aliases {
+		ethernet = "/ethernet@2490000";
 		mmc0 = "/sdhci@3460000";
 		mmc1 = "/sdhci@3400000";
 		i2c0 = "/bpmp/i2c";
@@ -28,6 +29,7 @@ 
 	ethernet@2490000 {
 		status = "okay";
 		phy-reset-gpios = <&gpio_main TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
 	};
 
 	i2c@3160000 {