[U-Boot,v1,04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

From: Marcel Ziswiler <marcel@ziswiler.com>
To: u-boot@lists.denx.de
Date: Fri,  8 Feb 2019 18:42:07 +0100
Message-Id: <20190208174229.23562-5-marcel@ziswiler.com>
In-Reply-To: <20190208174229.23562-1-marcel@ziswiler.com>
References: <20190208174229.23562-1-marcel@ziswiler.com>
MIME-Version: 1.0
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Max Krummenacher <max.krummenacher@toradex.com>
Subject: [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt,
	imx thermal, efi loader support
Precedence: list
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
Errors-To: u-boot-bounces@lists.denx.de
Sender: "U-Boot" <u-boot-bounces@lists.denx.de>

Message ID	20190208174229.23562-5-marcel@ziswiler.com
State	Accepted
Commit	1c986720d5ddf1c94ddb26e7625a076dddcfa3b4
Delegated to:	Stefano Babic
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Marcel Ziswiler <marcel@ziswiler.com> To: u-boot@lists.denx.de Date: Fri, 8 Feb 2019 18:42:07 +0100 Message-Id: <20190208174229.23562-5-marcel@ziswiler.com> In-Reply-To: <20190208174229.23562-1-marcel@ziswiler.com> References: <20190208174229.23562-1-marcel@ziswiler.com> MIME-Version: 1.0 Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Max Krummenacher <max.krummenacher@toradex.com> Subject: [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support Precedence: list Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	colibri imx6 fixes, device tree enablement and driver model conversion \| expand [U-Boot,v1,00/26] colibri imx6 fixes, device tree enablement and driver model conversion [U-Boot,v1,01/26] colibri_imx6: get rid of obsolete nospl configurations [U-Boot,v1,02/26] colibri_imx6: use distro defaults [U-Boot,v1,03/26] colibri_imx6: move console in env from header file to defconfig [U-Boot,v1,04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support [U-Boot,v1,05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration [U-Boot,v1,06/26] colibri_imx6: migrate to using device tree [U-Boot,v1,07/26] colibri_imx6: clean-up and migrate gpios to using driver model [U-Boot,v1,08/26] colibri_imx6: enable pin control driver [U-Boot,v1,09/26] colibri_imx6: migrate i2c to using driver model [U-Boot,v1,10/26] colibri_imx6: migrate pmic and regulator to using driver model [U-Boot,v1,11/26] colibri_imx6: migrate mmc to using driver model [U-Boot,v1,12/26] colibri_imx6: migrate usb to using driver model [U-Boot,v1,13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP [U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT [U-Boot,v1,15/26] colibri_imx6: add distroboot support [U-Boot,v1,16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings [U-Boot,v1,17/26] colibri imx6: pf0100: reorder and cleanup message printing [U-Boot,v1,18/26] colibri imx6: disable ri and dcd irq in uarts [U-Boot,v1,19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements [U-Boot,v1,20/26] colibri_imx6: revert fuse value set in mfgr_fuse [U-Boot,v1,21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree [U-Boot,v1,22/26] configs: colibri_imx6: Use ext4 file system by default [U-Boot,v1,23/26] colibri_imx6: use SDP if USB serial downloader has been used [U-Boot,v1,24/26] colibri_imx6: switch to zimage [U-Boot,v1,25/26] colibri_imx6: added nreset gpio on reboot [U-Boot,v1,26/26] board: colibri_imx6: check for and report ecc errors in fuses

[U-Boot,v1,04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support

Commit Message

Patch