diff mbox series

[U-Boot,v1,25/26] colibri_imx6: added nreset gpio on reboot

Message ID 20190208174229.23562-26-marcel@ziswiler.com
State Accepted
Commit 82029bf5b321278783408aef597863dcf54195c3
Delegated to: Stefano Babic
Headers show
Series colibri imx6 fixes, device tree enablement and driver model conversion | expand

Commit Message

Marcel Ziswiler Feb. 8, 2019, 5:42 p.m. UTC 
From: Gerard Salvatella <gerard.salvatella@toradex.com>

RGMII_RD1 pin (active high, GPIO6_IO27) is triggered on reboot during
the SPL phase. This asserts (active low) nReset_Out from the PMIC.
Only V1.1 and later Colibri iMX6 modules implement this in hw. Previous
versions do not use this pin, so it is safe to leave it enabled at all
times.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_imx6/colibri_imx6.c | 24 +++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 4d9032419a..98ad87af19 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -30,6 +30,7 @@ 
 #include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <cpu.h>
 
 #include "../common/tdx-cfg-block.h"
 #ifdef CONFIG_TDX_CMD_IMX_MFGR
@@ -1061,6 +1062,26 @@  static void spl_dram_init(void)
 	udelay(100);
 }
 
+static iomux_v3_cfg_t const gpio_reset_pad[] = {
+	MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL) |
+					MUX_MODE_SION
+#define GPIO_NRESET IMX_GPIO_NR(6, 27)
+};
+
+#define IMX_RESET_CAUSE_POR 0x00011
+static void nreset_out(void)
+{
+	int reset_cause = get_imx_reset_cause();
+
+	if (reset_cause != IMX_RESET_CAUSE_POR) {
+		imx_iomux_v3_setup_multiple_pads(gpio_reset_pad,
+						 ARRAY_SIZE(gpio_reset_pad));
+		gpio_direction_output(GPIO_NRESET, 1);
+		udelay(100);
+		gpio_direction_output(GPIO_NRESET, 0);
+	}
+}
+
 void board_init_f(ulong dummy)
 {
 	/* setup AIPS and disable watchdog */
@@ -1087,6 +1108,9 @@  void board_init_f(ulong dummy)
 	/* Clear the BSS. */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
+	/* Assert nReset_Out */
+	nreset_out();
+
 	/* load/boot image from boot device */
 	board_init_r(NULL, 0);
 }