@@ -17,6 +17,7 @@
spi0 = &spi;
usb0 = &usb_0;
usb1 = &usb_1;
+ cros-ec0 = &cros_ec;
};
config {
@@ -73,6 +74,7 @@
/* Put this first: it is the default */
gpio_unused: gpio-unused {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_INPUT>;
owner = <OWNER_GPIO>;
@@ -80,6 +82,7 @@
};
gpio_acpi_sci: acpi-sci {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_INPUT>;
invert;
@@ -87,6 +90,7 @@
};
gpio_acpi_smi: acpi-smi {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_INPUT>;
invert;
@@ -94,12 +98,14 @@
};
gpio_input: gpio-input {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_INPUT>;
owner = <OWNER_GPIO>;
};
gpio_input_invert: gpio-input-invert {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_INPUT>;
owner = <OWNER_GPIO>;
@@ -107,9 +113,11 @@
};
gpio_native: gpio-native {
+ u-boot,dm-pre-reloc;
};
gpio_out_high: gpio-out-high {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_OUTPUT>;
output-value = <1>;
@@ -118,6 +126,7 @@
};
gpio_out_low: gpio-out-low {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_OUTPUT>;
output-value = <0>;
@@ -126,6 +135,7 @@
};
gpio_pirq: gpio-pirq {
+ u-boot,dm-pre-reloc;
mode-gpio;
direction = <PIN_INPUT>;
owner = <OWNER_GPIO>;
@@ -133,6 +143,7 @@
};
soc_gpio@0 {
+ u-boot,dm-pre-reloc;
config =
<0 &gpio_unused 0>, /* unused */
<1 &gpio_unused 0>, /* unused */
@@ -250,8 +261,10 @@
spd {
#address-cells = <1>;
#size-cells = <0>;
+ u-boot,dm-pre-reloc;
samsung_4 {
reg = <6>;
+ u-boot,dm-pre-reloc;
data = [91 20 f1 03 04 11 05 0b
03 11 01 08 0a 00 50 01
78 78 90 50 90 11 50 e0
@@ -291,6 +304,7 @@
* columns 10, density 4096 mb, x32
*/
reg = <8>;
+ u-boot,dm-pre-reloc;
data = [91 20 f1 03 04 11 05 0b
03 11 01 08 0a 00 50 01
78 78 90 50 90 11 50 e0
@@ -326,6 +340,7 @@
};
samsung_8 {
reg = <10>;
+ u-boot,dm-pre-reloc;
data = [91 20 f1 03 04 12 05 0a
03 11 01 08 0a 00 50 01
78 78 90 50 90 11 50 e0
@@ -365,6 +380,7 @@
* columns 11, density 4096 mb, x16
*/
reg = <12>;
+ u-boot,dm-pre-reloc;
data = [91 20 f1 03 04 12 05 0a
03 11 01 08 0a 00 50 01
78 78 90 50 90 11 50 e0
@@ -404,6 +420,7 @@
* columns 11, density 8192 mb, x16
*/
reg = <13>;
+ u-boot,dm-pre-reloc;
data = [91 20 f1 03 05 1a 05 0a
03 11 01 08 0a 00 50 01
78 78 90 50 90 11 50 e0
@@ -443,6 +460,7 @@
* columns 11, density 8192 mb, x16
*/
reg = <15>;
+ u-boot,dm-pre-reloc;
data = [91 20 f1 03 05 1a 05 0a
03 11 01 08 0a 00 50 01
78 78 90 50 90 11 50 e0
@@ -511,7 +529,7 @@
compatible = "ehci-pci";
};
- pch@1f,0 {
+ pch: pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "intel,broadwell-pch";
u-boot,dm-pre-reloc;
@@ -530,17 +548,20 @@
power-enable-gpio = <&gpio_a 23 0>;
spi: spi {
+ u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich9-spi";
spi-flash@0 {
+ u-boot,dm-pre-reloc;
#size-cells = <1>;
#address-cells = <1>;
reg = <0>;
compatible = "winbond,w25q64",
"spi-flash";
- memory-map = <0xff800000 0x00800000>;
+ memory-map = <0 0xff800000 0 0x00800000>;
rw-mrc-cache {
+ u-boot,dm-pre-reloc;
label = "rw-mrc-cache";
reg = <0x003e0000 0x00010000>;
};
@@ -580,7 +601,8 @@
#size-cells = <0>;
u-boot,dm-pre-reloc;
intel,gen-dec = <0x800 0xfc 0x900 0xfc>;
- cros-ec@200 {
+ cros_ec: cros-ec {
+ u-boot,dm-pre-reloc;
compatible = "google,cros-ec-lpc";
reg = <0x204 1 0x200 1 0x880 0x80>;
@@ -601,7 +623,7 @@
sata@1f,2 {
compatible = "intel,wildcatpoint-ahci";
reg = <0x0000fa00 0 0 0 0>;
- u-boot,dm-pre-reloc;
+ u-boot,dm-pre-proper;
intel,sata-mode = "ahci";
intel,sata-port-map = <1>;
intel,sata-port0-gen3-tx = <0x72>;
@@ -615,13 +637,21 @@
};
};
+ pch-reset {
+ compatible = "intel,pch-reset";
+ intel,pch = <&pch>;
+ };
+
tpm {
+ u-boot,dm-pre-reloc;
reg = <0xfed40000 0x5000>;
compatible = "infineon,slb9635lpc";
};
microcode {
+ u-boot,dm-pre-reloc;
update@0 {
+ u-boot,dm-pre-reloc;
#include "microcode/mc0306d4_00000018.dtsi"
};
};
Add tags to allow required nodes to be present in SPL / TPL. Also enable the sysreset driver. Signed-off-by: Simon Glass <sjg@chromium.org> --- arch/x86/dts/chromebook_samus.dts | 38 +++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-)