diff mbox series

[U-Boot,v2,2/7] dfu: Make DFU support more SPL friendly

Message ID 20181205175136.27119-3-afd@ti.com
State Superseded
Delegated to: Tom Rini
Headers show
Series Add USB boot to HS DRA7xx/AM57xx | expand

Commit Message

Andrew Davis Dec. 5, 2018, 5:51 p.m. UTC 
Do this by using $(SPL_) in Makefiles and CONFIG_IS_ENABLED in C code.
This ensures the files and features are only built into the right build
for which they are enabled. Using the macros to simplify this patch was
made possible by the config symbol rename done in the last patch.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/Makefile     |  3 +--
 drivers/dfu/Makefile | 12 ++++++------
 include/dfu.h        | 10 +++++-----
 3 files changed, 12 insertions(+), 13 deletions(-)

Comments

Tom Rini Dec. 6, 2018, 9:40 p.m. UTC | #1 
On Wed, Dec 05, 2018 at 11:51:31AM -0600, Andrew F. Davis wrote:

> Do this by using $(SPL_) in Makefiles and CONFIG_IS_ENABLED in C code.
> This ensures the files and features are only built into the right build
> for which they are enabled. Using the macros to simplify this patch was
> made possible by the config symbol rename done in the last patch.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
diff mbox series

Patch

diff --git a/drivers/Makefile b/drivers/Makefile
index 7fe80b1d72..26e4d39df6 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -2,6 +2,7 @@ 
 
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
 obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
 obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
@@ -48,7 +49,6 @@  obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU) += dfu/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
@@ -85,7 +85,6 @@  obj-y += misc/
 obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
 obj-y += pcmcia/
-obj-y += dfu/
 obj-$(CONFIG_X86) += pch/
 obj-y += phy/allwinner/
 obj-y += phy/marvell/
diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index 56f9b0c5f4..4164f342ac 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -3,9 +3,9 @@ 
 # Copyright (C) 2012 Samsung Electronics
 # Lukasz Majewski <l.majewski@samsung.com>
 
-obj-$(CONFIG_DFU) += dfu.o
-obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
-obj-$(CONFIG_DFU_NAND) += dfu_nand.o
-obj-$(CONFIG_DFU_RAM) += dfu_ram.o
-obj-$(CONFIG_DFU_SF) += dfu_sf.o
-obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o
+obj-$(CONFIG_$(SPL_)DFU) += dfu.o
+obj-$(CONFIG_$(SPL_)DFU_MMC) += dfu_mmc.o
+obj-$(CONFIG_$(SPL_)DFU_NAND) += dfu_nand.o
+obj-$(CONFIG_$(SPL_)DFU_RAM) += dfu_ram.o
+obj-$(CONFIG_$(SPL_)DFU_SF) += dfu_sf.o
+obj-$(CONFIG_$(SPL_)DFU_TFTP) += dfu_tftp.o
diff --git a/include/dfu.h b/include/dfu.h
index fbe978abdc..9340a900a2 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -202,7 +202,7 @@  static inline void dfu_set_defer_flush(struct dfu_entity *dfu)
 int dfu_write_from_mem_addr(struct dfu_entity *dfu, void *buf, int size);
 
 /* Device specific */
-#ifdef CONFIG_DFU_MMC
+#if CONFIG_IS_ENABLED(DFU_MMC)
 extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr,
@@ -213,7 +213,7 @@  static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
-#ifdef CONFIG_DFU_NAND
+#if CONFIG_IS_ENABLED(DFU_NAND)
 extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr,
@@ -224,7 +224,7 @@  static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
-#ifdef CONFIG_DFU_RAM
+#if CONFIG_IS_ENABLED(DFU_RAM)
 extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr,
@@ -235,7 +235,7 @@  static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr,
 }
 #endif
 
-#ifdef CONFIG_DFU_SF
+#if CONFIG_IS_ENABLED(DFU_SF)
 extern int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, char *s);
 #else
 static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
@@ -259,7 +259,7 @@  static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
  *
  * @return 0 on success, otherwise error code
  */
-#ifdef CONFIG_DFU_TFTP
+#if CONFIG_IS_ENABLED(DFU_TFTP)
 int dfu_tftp_write(char *dfu_entity_name, unsigned int addr, unsigned int len,
 		   char *interface, char *devstring);
 #else