From patchwork Mon Nov 5 14:44:27 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mario Six X-Patchwork-Id: 993104 X-Patchwork-Delegate: mario.six@gdsys.cc Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.denx.de (client-ip=81.169.180.215; helo=lists.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=gdsys.cc Received: from lists.denx.de (dione.denx.de [81.169.180.215]) by ozlabs.org (Postfix) with ESMTP id 42pbMf322Cz9sBk for ; Tue, 6 Nov 2018 01:55:42 +1100 (AEDT) Received: by lists.denx.de (Postfix, from userid 105) id 14980C226A0; Mon, 5 Nov 2018 14:55:40 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on lists.denx.de X-Spam-Level: X-Spam-Status: No, score=0.8 required=5.0 tests=KHOP_BIG_TO_CC, SPF_HELO_PASS, UPPERCASE_50_75 autolearn=no autolearn_force=no version=3.4.0 Received: from lists.denx.de (localhost [IPv6:::1]) by lists.denx.de (Postfix) with ESMTP id CFA6AC22652; Mon, 5 Nov 2018 14:51:05 +0000 (UTC) Received: by lists.denx.de (Postfix, from userid 105) id 0769CC224BB; Mon, 5 Nov 2018 14:49:37 +0000 (UTC) Received: from smtprelay07.ispgateway.de (smtprelay07.ispgateway.de [134.119.228.103]) by lists.denx.de (Postfix) with ESMTPS id 56FA2C22457 for ; Mon, 5 Nov 2018 14:49:27 +0000 (UTC) Received: from [80.151.34.241] (helo=bob3.testumgebung.local) by smtprelay07.ispgateway.de with esmtpa (Exim 4.90_1) (envelope-from ) id 1gJgBt-0006oD-BN; Mon, 05 Nov 2018 15:49:21 +0100 From: Mario Six To: U-Boot Mailing List , Wolfgang Denk , Reinhard Arlt , Sinan Akman , Holger Brunck , York Sun , Heiko Schocher , Paul Gortmaker , Peter Tyser , Bin Meng Date: Mon, 5 Nov 2018 15:44:27 +0100 Message-Id: <20181105144512.16727-13-mario.six@gdsys.cc> X-Mailer: git-send-email 2.19.1 In-Reply-To: <20181105144512.16727-1-mario.six@gdsys.cc> References: <20181105144512.16727-1-mario.six@gdsys.cc> MIME-Version: 1.0 X-Df-Sender: bWFyaW8uc2l4QGdkc3lzLmNj Subject: [U-Boot] [PATCH v2 13/58] mpc83xx: Make distinct MPC8313ERDB targets X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.18 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" MPC8313ERDB has the option of either enabling NOR or NAND boot in its config file (by commenting out certain #ifdefs). To keep this ability after migrating options to Kconfig, we introduce two MPC8313ERDB configs: one for NOR, and one for NAND. Signed-off-by: Mario Six --- v1 -> v2: * Combined config creation and simplification patches --- arch/powerpc/cpu/mpc83xx/Kconfig | 10 +- board/freescale/mpc8313erdb/Kconfig | 17 +- configs/MPC8313ERDB_33_defconfig | 2 +- configs/MPC8313ERDB_66_defconfig | 2 +- configs/MPC8313ERDB_NAND_33_defconfig | 2 +- configs/MPC8313ERDB_NAND_66_defconfig | 2 +- .../configs/{MPC8313ERDB.h => MPC8313ERDB_NAND.h} | 61 +-- include/configs/MPC8313ERDB_NOR.h | 594 +++++++++++++++++++++ 8 files changed, 636 insertions(+), 54 deletions(-) rename include/configs/{MPC8313ERDB.h => MPC8313ERDB_NAND.h} (90%) create mode 100644 include/configs/MPC8313ERDB_NOR.h diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 29d84f363d1..ede98c70da7 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -29,8 +29,14 @@ config TARGET_MPC8308RDB select ARCH_MPC8308 select SYS_FSL_ERRATUM_ESDHC111 -config TARGET_MPC8313ERDB - bool "Support MPC8313ERDB" +config TARGET_MPC8313ERDB_NOR + bool "Support MPC8313ERDB_NOR" + select ARCH_MPC8313 + select BOARD_EARLY_INIT_F + select SUPPORT_SPL + +config TARGET_MPC8313ERDB_NAND + bool "Support MPC8313ERDB_NAND" select ARCH_MPC8313 select BOARD_EARLY_INIT_F select SUPPORT_SPL diff --git a/board/freescale/mpc8313erdb/Kconfig b/board/freescale/mpc8313erdb/Kconfig index 145608feab2..b6332a1368b 100644 --- a/board/freescale/mpc8313erdb/Kconfig +++ b/board/freescale/mpc8313erdb/Kconfig @@ -1,4 +1,4 @@ -if TARGET_MPC8313ERDB +if TARGET_MPC8313ERDB_NOR config SYS_BOARD default "mpc8313erdb" @@ -7,6 +7,19 @@ config SYS_VENDOR default "freescale" config SYS_CONFIG_NAME - default "MPC8313ERDB" + default "MPC8313ERDB_NOR" + +endif + +if TARGET_MPC8313ERDB_NAND + +config SYS_BOARD + default "mpc8313erdb" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "MPC8313ERDB_NAND" endif diff --git a/configs/MPC8313ERDB_33_defconfig b/configs/MPC8313ERDB_33_defconfig index 3bb680c2179..cacb5ba0774 100644 --- a/configs/MPC8313ERDB_33_defconfig +++ b/configs/MPC8313ERDB_33_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_TARGET_MPC8313ERDB_NOR=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" diff --git a/configs/MPC8313ERDB_66_defconfig b/configs/MPC8313ERDB_66_defconfig index bb26a9e3813..6b29c2e5c9d 100644 --- a/configs/MPC8313ERDB_66_defconfig +++ b/configs/MPC8313ERDB_66_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_TARGET_MPC8313ERDB_NOR=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig index ab28a78cbe5..4c8957c2742 100644 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ b/configs/MPC8313ERDB_NAND_33_defconfig @@ -3,7 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x00100000 CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_TARGET_MPC8313ERDB_NAND=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" diff --git a/configs/MPC8313ERDB_NAND_66_defconfig b/configs/MPC8313ERDB_NAND_66_defconfig index a454ec67fc6..ff3d0dc84e9 100644 --- a/configs/MPC8313ERDB_NAND_66_defconfig +++ b/configs/MPC8313ERDB_NAND_66_defconfig @@ -3,7 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x00100000 CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_TARGET_MPC8313ERDB_NAND=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB_NAND.h similarity index 90% rename from include/configs/MPC8313ERDB.h rename to include/configs/MPC8313ERDB_NAND.h index c5a8065d6a4..976b6854e49 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -15,7 +15,6 @@ #define CONFIG_E300 1 #define CONFIG_MPC8313ERDB 1 -#ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -40,8 +39,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #endif -#endif /* CONFIG_NAND */ - #ifndef CONFIG_SYS_MONITOR_BASE #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif @@ -70,7 +67,7 @@ #define CONFIG_SYS_IMMR 0xE0000000 -#if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) #define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR #endif @@ -184,11 +181,11 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_GPCM_XACS \ | OR_GPCM_SCY_9 \ | OR_GPCM_EHTR \ @@ -235,7 +232,7 @@ #define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */ /* drivers/mtd/nand/raw/nand.c */ -#if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_NAND_BASE 0xFFF00000 #else #define CONFIG_SYS_NAND_BASE 0xE2800000 @@ -248,12 +245,12 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_NAND_BASE \ | BR_DECC_CHK_GEN /* Use HW ECC */ \ | BR_PS_8 /* 8 bit port */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM \ +#define CONFIG_SYS_OR0_PRELIM \ (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -263,17 +260,9 @@ | OR_FCM_EHTR) /* 0xFFFF8396 */ -#ifdef CONFIG_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#endif +/* Still needed for spl_minimal.c */ +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) @@ -407,25 +396,12 @@ /* * Environment */ -#if defined(CONFIG_NAND) - #define CONFIG_ENV_OFFSET (512 * 1024) - #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) - #define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) -#elif !defined(CONFIG_SYS_RAMBOOT) - #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 - -/* Address and size of Redundant Environment Sector */ -#else - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif +#define CONFIG_ENV_OFFSET (512 * 1024) +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -499,17 +475,10 @@ HRCWH_TSEC2M_IN_RGMII |\ HRCWH_BIG_ENDIAN) -#ifdef CONFIG_NAND #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ HRCWH_FROM_0XFFF00100 |\ HRCWH_ROM_LOC_NAND_SP_8BIT |\ HRCWH_RL_EXT_NAND) -#else -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY) -#endif /* System IO Config */ #define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h new file mode 100644 index 00000000000..8d8482d00f5 --- /dev/null +++ b/include/configs/MPC8313ERDB_NOR.h @@ -0,0 +1,594 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010. + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC8313ERDB 1 + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_ELBC 1 + +/* + * On-board devices + * + * TSEC1 is VSC switch + * TSEC2 is SoC TSEC + */ +#define CONFIG_VSC7385_ENET +#define CONFIG_TSEC2 + +#ifdef CONFIG_SYS_66MHZ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ +#elif defined(CONFIG_SYS_33MHZ) +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#else +#error Unknown oscillator frequency. +#endif + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_SYS_IMMR 0xE0000000 + +#define CONFIG_SYS_MEMTEST_START 0x00001000 +#define CONFIG_SYS_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1 + +#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ + +/* + * Device configurations + */ + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + +#define CONFIG_TSEC1 + +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFE7FE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 + +#endif + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ + | CSCONFIG_ODT_RD_NEVER \ + | CSCONFIG_ODT_WR_ONLY_CURRENT \ + | CSCONFIG_ROW_BIT_13 \ + | CSCONFIG_COL_BIT_10) + /* 0x80010102 */ + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ + | (0 << TIMING_CFG0_WRT_SHIFT) \ + | (0 << TIMING_CFG0_RRT_SHIFT) \ + | (0 << TIMING_CFG0_WWT_SHIFT) \ + | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ + | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) + /* 0x00220802 */ +#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ + | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \ + | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ + | (5 << TIMING_CFG1_CASLAT_SHIFT) \ + | (10 << TIMING_CFG1_REFREC_SHIFT) \ + | (3 << TIMING_CFG1_WRREC_SHIFT) \ + | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ + | (2 << TIMING_CFG1_WRTORD_SHIFT)) + /* 0x3835a322 */ +#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ + | (5 << TIMING_CFG2_CPO_SHIFT) \ + | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ + | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ + | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ + | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ + | (6 << TIMING_CFG2_FOUR_ACT_SHIFT)) + /* 0x129048c6 */ /* P9-45,may need tuning */ +#define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) + /* 0x05100500 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_DBW_32 \ + | SDRAM_CFG_2T_EN) + /* 0x43088000 */ +#else +#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_DBW_32) + /* 0x43080000 */ +#endif +#define CONFIG_SYS_SDRAM_CFG2 0x00401000 +/* set burst length to 8 for 32-bit data path */ +#define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \ + | (0x0632 << SDRAM_MODE_SD_SHIFT)) + /* 0x44480632 */ +#define CONFIG_SYS_DDR_MODE_2 0x8000C000 + +#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR) + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD) + /* 0xFF006FF7 TODO SLOW 16 MB flash size */ + /* window base at flash base */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE + /* 16 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \ + !defined(CONFIG_SPL_BUILD) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ + +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + */ +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 +#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \ + | (0xFF << LBCR_BMT_SHIFT) \ + | 0xF) /* 0x0004ff0f */ + + /* LB refresh timer prescal, 266MHz/32 */ +#define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */ + +/* drivers/mtd/nand/nand.c */ +#define CONFIG_SYS_NAND_BASE 0xE2800000 + +#define CONFIG_MTD_PARTITION + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR1_PRELIM \ + (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) + /* 0xFFFF8396 */ + +/* Still needed for spl_minimal.c */ +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM + +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + +#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM +#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM + +/* local bus write LED / read status buffer (BCSR) mapping */ +#define CONFIG_SYS_BCSR_ADDR 0xFA000000 +#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ + /* map at 0xFA000000 on LCS3 */ +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_BCSR_ADDR \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + /* 0xFA000801 */ +#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BCSR_SIZE) \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFF8FF7 */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_BCSR_ADDR +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + + /* VSC7385 Base address on LCS2 */ +#define CONFIG_SYS_VSC7385_BASE 0xF0000000 +#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_SETA \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFE09FF */ + + /* Access window base at VSC7385 base */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) + +#endif + +#define CONFIG_MPC83XX_GPIO 1 + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE +#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC + */ + +#define CONFIG_GMII /* MII PHY management */ + +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_TSEC2 +#define CONFIG_HAS_ETH1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_SYS_TSEC2_OFFSET 0x25000 +#define TSEC2_PHY_ADDR 4 +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC2_PHYIDX 0 +#endif + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#if !defined(CONFIG_SYS_RAMBOOT) + #define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CONFIG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) + #define CONFIG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + + /* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ + /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#ifdef CONFIG_SYS_66MHZ + +/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ +/* 0x62040000 */ +#define CONFIG_SYS_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2) + +#elif defined(CONFIG_SYS_33MHZ) + +/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ +/* 0x65040000 */ +#define CONFIG_SYS_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_5X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5) + +#endif + +#define CONFIG_SYS_HRCW_HIGH_BASE (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN) + +#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY) + +/* System IO Config */ +#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ + /* Enable Internal USB Phy and GPIO on LCD Connector */ +#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC) + +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) + +#define CONFIG_SYS_HID2 HID2_HBE + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* DDR @ 0x00000000 */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) + +/* PCI @ 0x80000000 */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ + | BATL_PP_RW \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) + +/* PCI2 not supported on 8313 */ +#define CONFIG_SYS_IBAT3L (0) +#define CONFIG_SYS_IBAT3U (0) +#define CONFIG_SYS_IBAT4L (0) +#define CONFIG_SYS_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ + | BATL_PP_RW \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) + +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U +#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U +#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U +#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_NETDEV "eth1" + +#define CONFIG_HOSTNAME "mpc8313erdb" +#define CONFIG_ROOTPATH "/nfs/root/path" +#define CONFIG_BOOTFILE "uImage" + /* U-Boot image on TFTP server */ +#define CONFIG_UBOOTPATH "u-boot.bin" +#define CONFIG_FDTFILE "mpc8313erdb.dtb" + + /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" CONFIG_NETDEV "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ + " +$filesize; " \ + "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ + " +$filesize; " \ + "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ + " $filesize; " \ + "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ + " +$filesize; " \ + "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ + " $filesize\0" \ + "fdtaddr=780000\0" \ + "fdtfile=" CONFIG_FDTFILE "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\ + "$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#endif /* __CONFIG_H */