@@ -1256,9 +1256,7 @@ config ARCH_ROCKCHIP
select DM_REGULATOR
select ENABLE_ARM_SOC_BOOT0_HOOK
select SPI
- imply CMD_FASTBOOT
imply DISTRO_DEFAULTS
- imply FASTBOOT
imply FAT_WRITE
imply USB_FUNCTION_FASTBOOT
imply SPL_SYSRESET
@@ -25,7 +25,6 @@ config TI_COMMON_CMD_OPTIONS
imply CMD_EXT2
imply CMD_EXT4
imply CMD_EXT4_WRITE
- imply CMD_FASTBOOT if FASTBOOT
imply CMD_FAT
imply FAT_WRITE if CMD_FAT
imply CMD_FS_GENERIC
@@ -137,8 +137,6 @@ config AUTOBOOT_STOP_STR_SHA256
endmenu
-source "cmd/fastboot/Kconfig"
-
config BUILD_BIN2C
bool
@@ -650,6 +648,18 @@ config CMD_DM
can be useful to see the state of driver model for debugging or
interest.
+config CMD_FASTBOOT
+ bool "fastboot - Android fastboot support"
+ depends on FASTBOOT
+ help
+ This enables the command "fastboot" which enables the Android
+ fastboot mode for the platform. Fastboot is a protocol for
+ downloading images, flashing and device control used on
+ Android devices. Fastboot requires support for acting as a USB
+ device.
+
+ See doc/README.android-fastboot for more information.
+
config CMD_FDC
bool "fdcboot - Boot from floppy device"
help
@@ -29,7 +29,7 @@ obj-$(CONFIG_CMD_BOOTI) += bootm.o bootm_os.o
obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
-
+obj-$(CONFIG_FASTBOOT_FLASH) += image-sparse.o
obj-$(CONFIG_MII) += miiphyutil.o
obj-$(CONFIG_CMD_MII) += miiphyutil.o
obj-$(CONFIG_PHYLIB) += miiphyutil.o
@@ -109,19 +109,6 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o
obj-y += memsize.o
obj-y += stdio.o
-ifndef CONFIG_SPL_BUILD
-# This option is not just y/n - it can have a numeric value
-ifdef CONFIG_FASTBOOT_FLASH
-obj-y += image-sparse.o
-ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
-obj-y += fb_mmc.o
-endif
-ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV
-obj-y += fb_nand.o
-endif
-endif
-endif
-
ifdef CONFIG_CMD_EEPROM_LAYOUT
obj-y += eeprom/eeprom_field.o eeprom/eeprom_layout.o
endif
@@ -16,7 +16,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
CONFIG_AUTOBOOT_DELAY_STR="d"
CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_CMD_SPL=y
@@ -19,7 +19,7 @@ CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
CONFIG_AUTOBOOT_DELAY_STR="d"
CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_CMD_SPL=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
@@ -13,7 +13,7 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x00080000
# CONFIG_CMD_FLASH is not set
@@ -12,7 +12,7 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x00080000
CONFIG_CMD_NAND=y
@@ -12,7 +12,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0"
@@ -15,7 +15,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MTDPARTS=y
@@ -19,7 +19,7 @@ CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USB_GADGET_SUPPORT=y
CONFIG_SPL_USB_ETHER=y
# CONFIG_SPL_YMODEM_SUPPORT is not set
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x00080000
# CONFIG_CMD_FLASH is not set
@@ -24,7 +24,7 @@ CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
CONFIG_FASTBOOT_USB_DEV=1
@@ -29,7 +29,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
CONFIG_FASTBOOT_USB_DEV=1
@@ -7,7 +7,7 @@ CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x80000000
CONFIG_FASTBOOT_BUF_SIZE=0x1D000000
CONFIG_FASTBOOT_FLASH=y
@@ -8,7 +8,7 @@ CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x80000000
CONFIG_FASTBOOT_BUF_SIZE=0x7FF00000
CONFIG_FASTBOOT_FLASH=y
@@ -25,7 +25,7 @@ CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_CMD_SPL=y
CONFIG_CMD_ASKENV=y
@@ -25,7 +25,7 @@ CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_CMD_SPL=y
CONFIG_CMD_ASKENV=y
@@ -24,7 +24,7 @@ CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_DFU=y
@@ -25,7 +25,7 @@ CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
CONFIG_FASTBOOT_FLASH=y
@@ -30,7 +30,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
CONFIG_FASTBOOT_FLASH=y
@@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mamoj"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FASTBOOT_BUF_SIZE=0x10000000
CONFIG_FASTBOOT_FLASH=y
@@ -12,7 +12,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
CONFIG_SYS_PROMPT="kc1 # "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2000000
CONFIG_FASTBOOT_FLASH=y
@@ -9,7 +9,7 @@ CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
@@ -22,7 +22,7 @@ CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET_SUPPORT=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FASTBOOT_BUF_SIZE=0x10000000
CONFIG_FASTBOOT_FLASH=y
@@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
@@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
@@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
@@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
@@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
@@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
@@ -13,7 +13,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="BeagleBoard # "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x280000
@@ -12,7 +12,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="OMAP3_EVM # "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x280000
@@ -13,7 +13,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="OMAP Logic # "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
@@ -13,7 +13,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_SYS_PROMPT="sniper # "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2000000
CONFIG_FASTBOOT_FLASH=y
@@ -10,7 +10,7 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAS1,115200 CONSOLE=/dev/ttyAS1 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mem=992M@0x40000000 vmalloc=256m"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_PROMPT="stih410-b2260 => "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x40000000
CONFIG_FASTBOOT_BUF_SIZE=0x3DF00000
CONFIG_FASTBOOT_FLASH=y
@@ -19,7 +19,7 @@ CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_ATF=y
CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_THOR_DOWNLOAD=y
@@ -20,7 +20,7 @@ CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_ATF=y
CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_MEMTEST=y
@@ -19,7 +19,7 @@ CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_ATF=y
CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_THOR_DOWNLOAD=y
@@ -19,7 +19,7 @@ CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_ATF=y
CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_THOR_DOWNLOAD=y
@@ -19,7 +19,7 @@ CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_ATF=y
CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_THOR_DOWNLOAD=y
@@ -18,7 +18,7 @@ CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_ATF=y
CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_THOR_DOWNLOAD=y
@@ -28,6 +28,8 @@ source "drivers/dfu/Kconfig"
source "drivers/dma/Kconfig"
+source "drivers/fastboot/Kconfig"
+
source "drivers/firmware/Kconfig"
source "drivers/fpga/Kconfig"
@@ -71,6 +71,9 @@ obj-y += block/
obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
obj-$(CONFIG_CPU) += cpu/
obj-y += crypto/
+ifneq ($(CONFIG_FASTBOOT_FLASH_MMC_DEV)$(CONFIG_FASTBOOT_FLASH_NAND_DEV),)
+obj-y += fastboot/
+endif
obj-y += firmware/
obj-$(CONFIG_FPGA) += fpga/
obj-y += misc/
similarity index 88%
rename from cmd/fastboot/Kconfig
rename to drivers/fastboot/Kconfig
@@ -1,32 +1,20 @@
-comment "FASTBOOT"
+menu "Fastboot support"
-menuconfig FASTBOOT
- bool "Fastboot support"
- depends on USB_GADGET
- default y if ARCH_SUNXI && USB_MUSB_GADGET
-
-if FASTBOOT
+config FASTBOOT
+ bool
+ imply ANDROID_BOOT_IMAGE
+ imply CMD_FASTBOOT
config USB_FUNCTION_FASTBOOT
bool "Enable USB fastboot gadget"
- default y
+ depends on USB_GADGET
+ default y if ARCH_SUNXI && USB_MUSB_GADGET
+ select FASTBOOT
select USB_GADGET_DOWNLOAD
- imply ANDROID_BOOT_IMAGE
- imply CMD_FASTBOOT
help
This enables the USB part of the fastboot gadget.
-config CMD_FASTBOOT
- bool "Enable FASTBOOT command"
- help
- This enables the command "fastboot" which enables the Android
- fastboot mode for the platform's USB device. Fastboot is a USB
- protocol for downloading images, flashing and device control
- used on Android devices.
-
- See doc/README.android-fastboot for more information.
-
-if USB_FUNCTION_FASTBOOT
+if FASTBOOT
config FASTBOOT_BUF_ADDR
hex "Define FASTBOOT buffer address"
@@ -58,6 +46,7 @@ config FASTBOOT_BUF_SIZE
config FASTBOOT_USB_DEV
int "USB controller number"
+ depends on USB_FUNCTION_FASTBOOT
default 0
help
Some boards have USB OTG controller other than 0. Define this
@@ -129,6 +118,6 @@ config FASTBOOT_MBR_NAME
specified on the "fastboot flash" command line matches the value
defined here. The default target name for updating MBR is "mbr".
-endif # USB_FUNCTION_FASTBOOT
-
endif # FASTBOOT
+
+endmenu
new file mode 100644
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
+obj-y += fb_mmc.o
+endif
+ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV
+obj-y += fb_nand.o
+endif
similarity index 100%
rename from common/fb_mmc.c
rename to drivers/fastboot/fb_mmc.c
similarity index 100%
rename from common/fb_nand.c
rename to drivers/fastboot/fb_nand.c