new file mode 100644
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_AM33XX=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
+CONFIG_SPL=y
+CONFIG_ISW_ENTRY_ADDR=0x40301750
+CONFIG_SPL_STACK_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_MMC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_SYS_NS16550=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
+CONFIG_G_DNL_VENDOR_NUM=0x0451
+CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_OF_LIBFDT=y
+CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
+CONFIG_RSA=y
+CONFIG_FIT=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"
+CONFIG_DM_I2C=y
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_SPL_SD_BOOT=y
+CONFIG_USE_TINY_PRINTF=y
Add a new defconfig file for the AM335x High Security EVM. This config is specific for the case of SD card booting, we the boot types to be seperate defconfigs as some options change depending on boot type, in addition this allows us to trim the SPL size as we only need to support one boot media. This defconfig is the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_ISW_ENTRY_ADDR updated for secure images. CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_SD_BOOT option set to 'y' so we will build an MMC compatible SPL CONFIG_USE_TINY_PRINTF option set to 'y' to reduce SPL size NAND removed from CONFIG_SYS_EXTRA_OPTIONS as this adds NAND support to SPL, not just U-Boot proper, when this is fixed this can be added back Signed-off-by: Andrew F. Davis <afd@ti.com> --- configs/am335x_hs_evm_mmc_defconfig | 58 +++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 configs/am335x_hs_evm_mmc_defconfig