diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 8c197ff949a8..e2413af40360 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -2,11 +2,8 @@
 # Makefile for at91 specific clk
 #
 
-obj-y += pmc.o sckc.o
-obj-y += clk-slow.o clk-main.o clk-plla.o clk-plladiv.o clk-master.o
-obj-y += clk-system.o clk-peripheral.o
-
-obj-$(CONFIG_AT91_UTMI)		+= clk-utmi.o
-obj-$(CONFIG_AT91_USB_CLK)	+= clk-usb.o
-obj-$(CONFIG_AT91_H32MX)	+= clk-h32mx.o
-obj-$(CONFIG_AT91_GENERIC_CLK)	+= clk-generated.o
+ifdef CONFIG_CLK_CCF
+obj-y += pmc.o
+else
+obj-y += compat.o
+endif
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
deleted file mode 100644
index c0610940c3be..000000000000
--- a/drivers/clk/at91/clk-generated.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <log.h>
-#include <malloc.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define GENERATED_SOURCE_MAX	6
-#define GENERATED_MAX_DIV	255
-
-/**
- * generated_clk_bind() - for the generated clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-static int generated_clk_bind(struct udevice *dev)
-{
-	return at91_clk_sub_device_bind(dev, "generic-clk");
-}
-
-static const struct udevice_id generated_clk_match[] = {
-	{ .compatible = "atmel,sama5d2-clk-generated" },
-	{}
-};
-
-U_BOOT_DRIVER(generated_clk) = {
-	.name = "generated-clk",
-	.id = UCLASS_MISC,
-	.of_match = generated_clk_match,
-	.bind = generated_clk_bind,
-};
-
-/*-------------------------------------------------------------*/
-
-struct generic_clk_priv {
-	u32 num_parents;
-};
-
-static ulong generic_clk_get_rate(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct clk parent;
-	ulong clk_rate;
-	u32 tmp, gckdiv;
-	u8 clock_source, parent_index;
-	int ret;
-
-	writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
-	tmp = readl(&pmc->pcr);
-	clock_source = (tmp >> AT91_PMC_PCR_GCKCSS_OFFSET) &
-		    AT91_PMC_PCR_GCKCSS_MASK;
-	gckdiv = (tmp >> AT91_PMC_PCR_GCKDIV_OFFSET) & AT91_PMC_PCR_GCKDIV_MASK;
-
-	parent_index = clock_source - 1;
-	ret = clk_get_by_index(dev_get_parent(clk->dev), parent_index, &parent);
-	if (ret)
-		return 0;
-
-	clk_rate = clk_get_rate(&parent) / (gckdiv + 1);
-
-	clk_free(&parent);
-
-	return clk_rate;
-}
-
-static ulong generic_clk_set_rate(struct clk *clk, ulong rate)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct generic_clk_priv *priv = dev_get_priv(clk->dev);
-	struct clk parent, best_parent;
-	ulong tmp_rate, best_rate = rate, parent_rate;
-	int tmp_diff, best_diff = -1;
-	u32 div, best_div = 0;
-	u8 best_parent_index, best_clock_source = 0;
-	u8 i;
-	u32 tmp;
-	int ret;
-
-	for (i = 0; i < priv->num_parents; i++) {
-		ret = clk_get_by_index(dev_get_parent(clk->dev), i, &parent);
-		if (ret)
-			return ret;
-
-		parent_rate = clk_get_rate(&parent);
-		if (IS_ERR_VALUE(parent_rate))
-			return parent_rate;
-
-		for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
-			tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
-			tmp_diff = abs(rate - tmp_rate);
-
-			if (best_diff < 0 || best_diff > tmp_diff) {
-				best_rate = tmp_rate;
-				best_diff = tmp_diff;
-
-				best_div = div - 1;
-				best_parent = parent;
-				best_parent_index = i;
-				best_clock_source = best_parent_index + 1;
-			}
-
-			if (!best_diff || tmp_rate < rate)
-				break;
-		}
-
-		if (!best_diff)
-			break;
-	}
-
-	debug("GCK: best parent: %s, best_rate = %ld, best_div = %d\n",
-	      best_parent.dev->name, best_rate, best_div);
-
-	ret = clk_enable(&best_parent);
-	if (ret)
-		return ret;
-
-	writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
-	tmp = readl(&pmc->pcr);
-	tmp &= ~(AT91_PMC_PCR_GCKDIV | AT91_PMC_PCR_GCKCSS);
-	tmp |= AT91_PMC_PCR_GCKCSS_(best_clock_source) |
-	       AT91_PMC_PCR_CMD_WRITE |
-	       AT91_PMC_PCR_GCKDIV_(best_div) |
-	       AT91_PMC_PCR_GCKEN;
-	writel(tmp, &pmc->pcr);
-
-	while (!(readl(&pmc->sr) & AT91_PMC_GCKRDY))
-		;
-
-	return 0;
-}
-
-static struct clk_ops generic_clk_ops = {
-	.of_xlate = at91_clk_of_xlate,
-	.get_rate = generic_clk_get_rate,
-	.set_rate = generic_clk_set_rate,
-};
-
-static int generic_clk_ofdata_to_platdata(struct udevice *dev)
-{
-	struct generic_clk_priv *priv = dev_get_priv(dev);
-	u32 cells[GENERATED_SOURCE_MAX];
-	u32 num_parents;
-
-	num_parents = fdtdec_get_int_array_count(gd->fdt_blob,
-			dev_of_offset(dev_get_parent(dev)), "clocks", cells,
-			GENERATED_SOURCE_MAX);
-
-	if (!num_parents)
-		return -1;
-
-	priv->num_parents = num_parents;
-
-	return 0;
-}
-
-U_BOOT_DRIVER(generic_clk) = {
-	.name = "generic-clk",
-	.id = UCLASS_CLK,
-	.probe = at91_clk_probe,
-	.ofdata_to_platdata = generic_clk_ofdata_to_platdata,
-	.priv_auto_alloc_size = sizeof(struct generic_clk_priv),
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &generic_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
deleted file mode 100644
index 86bb71f6128b..000000000000
--- a/drivers/clk/at91/clk-h32mx.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <dm/device_compat.h>
-#include <dm/util.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define H32MX_MAX_FREQ	90000000
-
-static ulong sama5d4_h32mx_clk_get_rate(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	ulong rate = gd->arch.mck_rate_hz;
-
-	if (readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV)
-		rate /= 2;
-
-	if (rate > H32MX_MAX_FREQ)
-		dev_dbg(clk->dev, "H32MX clock is too fast\n");
-
-	return rate;
-}
-
-static struct clk_ops sama5d4_h32mx_clk_ops = {
-	.get_rate = sama5d4_h32mx_clk_get_rate,
-};
-
-static int sama5d4_h32mx_clk_probe(struct udevice *dev)
-{
-	return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id sama5d4_h32mx_clk_match[] = {
-	{ .compatible = "atmel,sama5d4-clk-h32mx" },
-	{}
-};
-
-U_BOOT_DRIVER(sama5d4_h32mx_clk) = {
-	.name = "sama5d4-h32mx-clk",
-	.id = UCLASS_CLK,
-	.of_match = sama5d4_h32mx_clk_match,
-	.probe = sama5d4_h32mx_clk_probe,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &sama5d4_h32mx_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
deleted file mode 100644
index b31a1cb68286..000000000000
--- a/drivers/clk/at91/clk-main.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int main_osc_clk_enable(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-
-	if (readl(&pmc->sr) & AT91_PMC_MOSCSELS)
-		return 0;
-
-	return -EINVAL;
-}
-
-static ulong main_osc_clk_get_rate(struct clk *clk)
-{
-	return gd->arch.main_clk_rate_hz;
-}
-
-static struct clk_ops main_osc_clk_ops = {
-	.enable = main_osc_clk_enable,
-	.get_rate = main_osc_clk_get_rate,
-};
-
-static int main_osc_clk_probe(struct udevice *dev)
-{
-	return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id main_osc_clk_match[] = {
-	{ .compatible = "atmel,at91sam9x5-clk-main" },
-	{}
-};
-
-U_BOOT_DRIVER(at91sam9x5_main_osc_clk) = {
-	.name = "at91sam9x5-main-osc-clk",
-	.id = UCLASS_CLK,
-	.of_match = main_osc_clk_match,
-	.probe = main_osc_clk_probe,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &main_osc_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
deleted file mode 100644
index e078fab7b415..000000000000
--- a/drivers/clk/at91/clk-master.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static ulong at91_master_clk_get_rate(struct clk *clk)
-{
-	return gd->arch.mck_rate_hz;
-}
-
-static struct clk_ops at91_master_clk_ops = {
-	.get_rate = at91_master_clk_get_rate,
-};
-
-static const struct udevice_id at91_master_clk_match[] = {
-	{ .compatible = "atmel,at91rm9200-clk-master" },
-	{ .compatible = "atmel,at91sam9x5-clk-master" },
-	{}
-};
-
-U_BOOT_DRIVER(atmel_at91rm9200_clk_master) = {
-	.name = "atmel_at91rm9200_clk_master",
-	.id = UCLASS_CLK,
-	.of_match = at91_master_clk_match,
-	.ops = &at91_master_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
deleted file mode 100644
index cd9d5e77c027..000000000000
--- a/drivers/clk/at91/clk-peripheral.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <malloc.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-#define PERIPHERAL_ID_MIN	2
-#define PERIPHERAL_ID_MAX	31
-#define PERIPHERAL_MASK(id)	(1 << ((id) & PERIPHERAL_ID_MAX))
-
-enum periph_clk_type {
-	CLK_PERIPH_AT91RM9200 = 0,
-	CLK_PERIPH_AT91SAM9X5,
-};
-/**
- * sam9x5_periph_clk_bind() - for the periph clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-static int sam9x5_periph_clk_bind(struct udevice *dev)
-{
-	return at91_clk_sub_device_bind(dev, "periph-clk");
-}
-
-static const struct udevice_id sam9x5_periph_clk_match[] = {
-	{
-		.compatible = "atmel,at91rm9200-clk-peripheral",
-		.data = CLK_PERIPH_AT91RM9200,
-	},
-	{
-		.compatible = "atmel,at91sam9x5-clk-peripheral",
-		.data = CLK_PERIPH_AT91SAM9X5,
-	},
-	{}
-};
-
-U_BOOT_DRIVER(atmel_at91rm9200_clk_peripheral) = {
-	.name = "atmel_at91rm9200_clk_peripheral",
-	.id = UCLASS_MISC,
-	.of_match = sam9x5_periph_clk_match,
-	.bind = sam9x5_periph_clk_bind,
-};
-
-/*---------------------------------------------------------*/
-
-static int periph_clk_enable(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	enum periph_clk_type clk_type;
-	void *addr;
-
-	if (clk->id < PERIPHERAL_ID_MIN)
-		return -1;
-
-	clk_type = dev_get_driver_data(dev_get_parent(clk->dev));
-	if (clk_type == CLK_PERIPH_AT91RM9200) {
-		addr = &pmc->pcer;
-		if (clk->id > PERIPHERAL_ID_MAX)
-			addr = &pmc->pcer1;
-
-		setbits_le32(addr, PERIPHERAL_MASK(clk->id));
-	} else {
-		writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
-		setbits_le32(&pmc->pcr,
-			     AT91_PMC_PCR_CMD_WRITE | AT91_PMC_PCR_EN);
-	}
-
-	return 0;
-}
-
-static ulong periph_get_rate(struct clk *clk)
-{
-	struct udevice *dev;
-	struct clk clk_dev;
-	ulong clk_rate;
-	int ret;
-
-	dev = dev_get_parent(clk->dev);
-
-	ret = clk_get_by_index(dev, 0, &clk_dev);
-	if (ret)
-		return ret;
-
-	clk_rate = clk_get_rate(&clk_dev);
-
-	clk_free(&clk_dev);
-
-	return clk_rate;
-}
-
-static struct clk_ops periph_clk_ops = {
-	.of_xlate = at91_clk_of_xlate,
-	.enable = periph_clk_enable,
-	.get_rate = periph_get_rate,
-};
-
-U_BOOT_DRIVER(clk_periph) = {
-	.name	= "periph-clk",
-	.id	= UCLASS_CLK,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.probe = at91_clk_probe,
-	.ops	= &periph_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-plla.c b/drivers/clk/at91/clk-plla.c
deleted file mode 100644
index 79d725819fca..000000000000
--- a/drivers/clk/at91/clk-plla.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int plla_clk_enable(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-
-	if (readl(&pmc->sr) & AT91_PMC_LOCKA)
-		return 0;
-
-	return -EINVAL;
-}
-
-static ulong plla_clk_get_rate(struct clk *clk)
-{
-	return gd->arch.plla_rate_hz;
-}
-
-static struct clk_ops plla_clk_ops = {
-	.enable = plla_clk_enable,
-	.get_rate = plla_clk_get_rate,
-};
-
-static int plla_clk_probe(struct udevice *dev)
-{
-	return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id plla_clk_match[] = {
-	{ .compatible = "atmel,sama5d3-clk-pll" },
-	{}
-};
-
-U_BOOT_DRIVER(at91_plla_clk) = {
-	.name = "at91-plla-clk",
-	.id = UCLASS_CLK,
-	.of_match = plla_clk_match,
-	.probe = plla_clk_probe,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &plla_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-plladiv.c b/drivers/clk/at91/clk-plladiv.c
deleted file mode 100644
index ca6158ef6ab2..000000000000
--- a/drivers/clk/at91/clk-plladiv.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Microhip / Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@microchip.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm/device.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-static int at91_plladiv_clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static ulong at91_plladiv_clk_get_rate(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct clk source;
-	ulong clk_rate;
-	int ret;
-
-	ret = clk_get_by_index(clk->dev, 0, &source);
-	if (ret)
-		return -EINVAL;
-
-	clk_rate = clk_get_rate(&source);
-	if (readl(&pmc->mckr) & AT91_PMC_MCKR_PLLADIV_2)
-		clk_rate /= 2;
-
-	return clk_rate;
-}
-
-static ulong at91_plladiv_clk_set_rate(struct clk *clk, ulong rate)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct clk source;
-	ulong parent_rate;
-	int ret;
-
-	ret = clk_get_by_index(clk->dev, 0, &source);
-	if (ret)
-		return -EINVAL;
-
-	parent_rate = clk_get_rate(&source);
-	if ((parent_rate != rate) && ((parent_rate) / 2 != rate))
-		return -EINVAL;
-
-	if (parent_rate != rate) {
-		writel((readl(&pmc->mckr) | AT91_PMC_MCKR_PLLADIV_2),
-		       &pmc->mckr);
-	}
-
-	return 0;
-}
-
-static struct clk_ops at91_plladiv_clk_ops = {
-	.enable = at91_plladiv_clk_enable,
-	.get_rate = at91_plladiv_clk_get_rate,
-	.set_rate = at91_plladiv_clk_set_rate,
-};
-
-static int at91_plladiv_clk_probe(struct udevice *dev)
-{
-	return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id at91_plladiv_clk_match[] = {
-	{ .compatible = "atmel,at91sam9x5-clk-plldiv" },
-	{}
-};
-
-U_BOOT_DRIVER(at91_plladiv_clk) = {
-	.name = "at91-plladiv-clk",
-	.id = UCLASS_CLK,
-	.of_match = at91_plladiv_clk_match,
-	.probe = at91_plladiv_clk_probe,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &at91_plladiv_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
deleted file mode 100644
index 1f8665768b00..000000000000
--- a/drivers/clk/at91/clk-slow.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-
-static int at91_slow_clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static ulong at91_slow_clk_get_rate(struct clk *clk)
-{
-	return CONFIG_SYS_AT91_SLOW_CLOCK;
-}
-
-static struct clk_ops at91_slow_clk_ops = {
-	.enable = at91_slow_clk_enable,
-	.get_rate = at91_slow_clk_get_rate,
-};
-
-static const struct udevice_id at91_slow_clk_match[] = {
-	{ .compatible = "atmel,at91sam9x5-clk-slow" },
-	{}
-};
-
-U_BOOT_DRIVER(at91_slow_clk) = {
-	.name = "at91-slow-clk",
-	.id = UCLASS_CLK,
-	.of_match = at91_slow_clk_match,
-	.ops = &at91_slow_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
deleted file mode 100644
index 76b1958670d6..000000000000
--- a/drivers/clk/at91/clk-system.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-#define SYSTEM_MAX_ID		31
-
-/**
- * at91_system_clk_bind() - for the system clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-static int at91_system_clk_bind(struct udevice *dev)
-{
-	return at91_clk_sub_device_bind(dev, "system-clk");
-}
-
-static const struct udevice_id at91_system_clk_match[] = {
-	{ .compatible = "atmel,at91rm9200-clk-system" },
-	{}
-};
-
-U_BOOT_DRIVER(at91_system_clk) = {
-	.name = "at91-system-clk",
-	.id = UCLASS_MISC,
-	.of_match = at91_system_clk_match,
-	.bind = at91_system_clk_bind,
-};
-
-/*----------------------------------------------------------*/
-
-static inline int is_pck(int id)
-{
-	return (id >= 8) && (id <= 15);
-}
-
-static ulong system_clk_get_rate(struct clk *clk)
-{
-	struct clk clk_dev;
-	int ret;
-
-	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
-	if (ret)
-		return -EINVAL;
-
-	return clk_get_rate(&clk_dev);
-}
-
-static ulong system_clk_set_rate(struct clk *clk, ulong rate)
-{
-	struct clk clk_dev;
-	int ret;
-
-	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
-	if (ret)
-		return -EINVAL;
-
-	return clk_set_rate(&clk_dev, rate);
-}
-
-static int system_clk_enable(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	u32 mask;
-
-	if (clk->id > SYSTEM_MAX_ID)
-		return -EINVAL;
-
-	mask = BIT(clk->id);
-
-	writel(mask, &pmc->scer);
-
-	/**
-	 * For the programmable clocks the Ready status in the PMC
-	 * status register should be checked after enabling.
-	 * For other clocks this is unnecessary.
-	 */
-	if (!is_pck(clk->id))
-		return 0;
-
-	while (!(readl(&pmc->sr) & mask))
-		;
-
-	return 0;
-}
-
-static struct clk_ops system_clk_ops = {
-	.of_xlate = at91_clk_of_xlate,
-	.get_rate = system_clk_get_rate,
-	.set_rate = system_clk_set_rate,
-	.enable = system_clk_enable,
-};
-
-U_BOOT_DRIVER(system_clk) = {
-	.name = "system-clk",
-	.id = UCLASS_CLK,
-	.probe = at91_clk_probe,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &system_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
deleted file mode 100644
index af9d72436933..000000000000
--- a/drivers/clk/at91/clk-usb.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Microhip / Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@microchip.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <log.h>
-#include <dm/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define AT91_USB_CLK_SOURCE_MAX	2
-#define AT91_USB_CLK_MAX_DIV	15
-
-struct at91_usb_clk_priv {
-	u32 num_clksource;
-};
-
-static ulong at91_usb_clk_get_rate(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct clk source;
-	u32 tmp, usbdiv;
-	u8 source_index;
-	int ret;
-
-	tmp = readl(&pmc->pcr);
-	source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) &
-			AT91_PMC_USB_USBS_MASK;
-	usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK;
-
-	ret = clk_get_by_index(clk->dev, source_index, &source);
-	if (ret)
-		return 0;
-
-	return clk_get_rate(&source) / (usbdiv + 1);
-}
-
-static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev);
-	struct clk source, best_source;
-	ulong tmp_rate, best_rate = rate, source_rate;
-	int tmp_diff, best_diff = -1;
-	u32 div, best_div = 0;
-	u8 best_source_index = 0;
-	u8 i;
-	u32 tmp;
-	int ret;
-
-	for (i = 0; i < priv->num_clksource; i++) {
-		ret = clk_get_by_index(clk->dev, i, &source);
-		if (ret)
-			return ret;
-
-		source_rate = clk_get_rate(&source);
-		if (IS_ERR_VALUE(source_rate))
-			return source_rate;
-
-		for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) {
-			tmp_rate = DIV_ROUND_CLOSEST(source_rate, div);
-			tmp_diff = abs(rate - tmp_rate);
-
-			if (best_diff < 0 || best_diff > tmp_diff) {
-				best_rate = tmp_rate;
-				best_diff = tmp_diff;
-
-				best_div = div - 1;
-				best_source = source;
-				best_source_index = i;
-			}
-
-			if (!best_diff || tmp_rate < rate)
-				break;
-		}
-
-		if (!best_diff)
-			break;
-	}
-
-	debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n",
-	      best_source.dev->name, best_rate, best_div);
-
-	ret = clk_enable(&best_source);
-	if (ret)
-		return ret;
-
-	tmp = AT91_PMC_USB_USBS_(best_source_index) |
-	      AT91_PMC_USB_DIV_(best_div);
-	writel(tmp, &pmc->usb);
-
-	return 0;
-}
-
-static struct clk_ops at91_usb_clk_ops = {
-	.get_rate = at91_usb_clk_get_rate,
-	.set_rate = at91_usb_clk_set_rate,
-};
-
-static int at91_usb_clk_ofdata_to_platdata(struct udevice *dev)
-{
-	struct at91_usb_clk_priv *priv = dev_get_priv(dev);
-	u32 cells[AT91_USB_CLK_SOURCE_MAX];
-	u32 num_clksource;
-
-	num_clksource = fdtdec_get_int_array_count(gd->fdt_blob,
-						   dev_of_offset(dev),
-						   "clocks", cells,
-						   AT91_USB_CLK_SOURCE_MAX);
-
-	if (!num_clksource)
-		return -1;
-
-	priv->num_clksource = num_clksource;
-
-	return 0;
-}
-
-static int at91_usb_clk_probe(struct udevice *dev)
-{
-	return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id at91_usb_clk_match[] = {
-	{ .compatible = "atmel,at91sam9x5-clk-usb" },
-	{}
-};
-
-U_BOOT_DRIVER(at91_usb_clk) = {
-	.name = "at91-usb-clk",
-	.id = UCLASS_CLK,
-	.of_match = at91_usb_clk_match,
-	.probe = at91_usb_clk_probe,
-	.ofdata_to_platdata = at91_usb_clk_ofdata_to_platdata,
-	.priv_auto_alloc_size = sizeof(struct at91_usb_clk_priv),
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &at91_usb_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
deleted file mode 100644
index 18af0bfeaad1..000000000000
--- a/drivers/clk/at91/clk-utmi.c
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <syscon.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_sfr.h>
-#include "pmc.h"
-
-/*
- * The purpose of this clock is to generate a 480 MHz signal. A different
- * rate can't be configured.
- */
-#define UTMI_RATE	480000000
-
-static int utmi_clk_enable(struct clk *clk)
-{
-	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
-	struct at91_pmc *pmc = plat->reg_base;
-	struct clk clk_dev;
-	ulong clk_rate;
-	u32 utmi_ref_clk_freq;
-	u32 tmp;
-	int err;
-	int timeout = 2000000;
-
-	if (readl(&pmc->sr) & AT91_PMC_LOCKU)
-		return 0;
-
-	/*
-	 * If mainck rate is different from 12 MHz, we have to configure the
-	 * FREQ field of the SFR_UTMICKTRIM register to generate properly
-	 * the utmi clock.
-	 */
-	err = clk_get_by_index(clk->dev, 0, &clk_dev);
-	if (err)
-		return -EINVAL;
-
-	clk_rate = clk_get_rate(&clk_dev);
-	switch (clk_rate) {
-	case 12000000:
-		utmi_ref_clk_freq = 0;
-		break;
-	case 16000000:
-		utmi_ref_clk_freq = 1;
-		break;
-	case 24000000:
-		utmi_ref_clk_freq = 2;
-		break;
-	/*
-	 * Not supported on SAMA5D2 but it's not an issue since MAINCK
-	 * maximum value is 24 MHz.
-	 */
-	case 48000000:
-		utmi_ref_clk_freq = 3;
-		break;
-	default:
-		printf("UTMICK: unsupported mainck rate\n");
-		return -EINVAL;
-	}
-
-	if (plat->regmap_sfr) {
-		err = regmap_read(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, &tmp);
-		if (err)
-			return -EINVAL;
-
-		tmp &= ~AT91_UTMICKTRIM_FREQ;
-		tmp |= utmi_ref_clk_freq;
-		err = regmap_write(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, tmp);
-		if (err)
-			return -EINVAL;
-	} else if (utmi_ref_clk_freq) {
-		printf("UTMICK: sfr node required\n");
-		return -EINVAL;
-	}
-
-	tmp = readl(&pmc->uckr);
-	tmp |= AT91_PMC_UPLLEN |
-	       AT91_PMC_UPLLCOUNT |
-	       AT91_PMC_BIASEN;
-	writel(tmp, &pmc->uckr);
-
-	while ((--timeout) && !(readl(&pmc->sr) & AT91_PMC_LOCKU))
-		;
-	if (!timeout) {
-		printf("UTMICK: timeout waiting for UPLL lock\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static ulong utmi_clk_get_rate(struct clk *clk)
-{
-	/* UTMI clk rate is fixed. */
-	return UTMI_RATE;
-}
-
-static struct clk_ops utmi_clk_ops = {
-	.enable = utmi_clk_enable,
-	.get_rate = utmi_clk_get_rate,
-};
-
-static int utmi_clk_ofdata_to_platdata(struct udevice *dev)
-{
-	struct pmc_platdata *plat = dev_get_platdata(dev);
-	struct udevice *syscon;
-
-	uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
-				     "regmap-sfr", &syscon);
-
-	if (syscon)
-		plat->regmap_sfr = syscon_get_regmap(syscon);
-
-	return 0;
-}
-
-static int utmi_clk_probe(struct udevice *dev)
-{
-	return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id utmi_clk_match[] = {
-	{ .compatible = "atmel,at91sam9x5-clk-utmi" },
-	{}
-};
-
-U_BOOT_DRIVER(at91sam9x5_utmi_clk) = {
-	.name = "at91sam9x5-utmi-clk",
-	.id = UCLASS_CLK,
-	.of_match = utmi_clk_match,
-	.probe = utmi_clk_probe,
-	.ofdata_to_platdata = utmi_clk_ofdata_to_platdata,
-	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
-	.ops = &utmi_clk_ops,
-};
diff --git a/drivers/clk/at91/compat.c b/drivers/clk/at91/compat.c
new file mode 100644
index 000000000000..60b607a47192
--- /dev/null
+++ b/drivers/clk/at91/compat.c
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Compatible code for non CCF AT91 platforms.
+ *
+ * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <dm/util.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_sfr.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#include "pmc.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct pmc_platdata {
+	struct at91_pmc *reg_base;
+	struct regmap *regmap_sfr;
+};
+
+static const struct udevice_id at91_pmc_match[] = {
+	{ .compatible = "atmel,at91rm9200-pmc" },
+	{ .compatible = "atmel,at91sam9260-pmc" },
+	{ .compatible = "atmel,at91sam9g45-pmc" },
+	{ .compatible = "atmel,at91sam9n12-pmc" },
+	{ .compatible = "atmel,at91sam9x5-pmc" },
+	{ .compatible = "atmel,sama5d3-pmc" },
+	{ .compatible = "atmel,sama5d2-pmc" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_pmc) = {
+	.name = "at91-pmc",
+	.id = UCLASS_SIMPLE_BUS,
+	.of_match = at91_pmc_match,
+};
+
+static int at91_pmc_core_probe(struct udevice *dev)
+{
+	struct pmc_platdata *plat = dev_get_platdata(dev);
+
+	dev = dev_get_parent(dev);
+
+	plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev);
+
+	return 0;
+}
+
+/**
+ * at91_clk_sub_device_bind() - for the at91 clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name)
+{
+	const void *fdt = gd->fdt_blob;
+	int offset = dev_of_offset(dev);
+	bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
+	const char *name;
+	int ret;
+
+	for (offset = fdt_first_subnode(fdt, offset);
+	     offset > 0;
+	     offset = fdt_next_subnode(fdt, offset)) {
+		if (pre_reloc_only &&
+		    !ofnode_pre_reloc(offset_to_ofnode(offset)))
+			continue;
+		/*
+		 * If this node has "compatible" property, this is not
+		 * a clock sub-node, but a normal device. skip.
+		 */
+		fdt_get_property(fdt, offset, "compatible", &ret);
+		if (ret >= 0)
+			continue;
+
+		if (ret != -FDT_ERR_NOTFOUND)
+			return ret;
+
+		name = fdt_get_name(fdt, offset, NULL);
+		if (!name)
+			return -EINVAL;
+		ret = device_bind_driver_to_node(dev, drv_name, name,
+					offset_to_ofnode(offset), NULL);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
+{
+	int periph;
+
+	if (args->args_count) {
+		debug("Invalid args_count: %d\n", args->args_count);
+		return -EINVAL;
+	}
+
+	periph = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(clk->dev), "reg",
+				 -1);
+	if (periph < 0)
+		return -EINVAL;
+
+	clk->id = periph;
+
+	return 0;
+}
+
+int at91_clk_probe(struct udevice *dev)
+{
+	struct udevice *dev_periph_container, *dev_pmc;
+	struct pmc_platdata *plat = dev_get_platdata(dev);
+
+	dev_periph_container = dev_get_parent(dev);
+	dev_pmc = dev_get_parent(dev_periph_container);
+
+	plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev_pmc);
+
+	return 0;
+}
+
+/* SCKC specific code. */
+static const struct udevice_id at91_sckc_match[] = {
+	{ .compatible = "atmel,at91sam9x5-sckc" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_sckc) = {
+	.name = "at91-sckc",
+	.id = UCLASS_SIMPLE_BUS,
+	.of_match = at91_sckc_match,
+};
+
+/* Slow clock specific code. */
+static int at91_slow_clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static ulong at91_slow_clk_get_rate(struct clk *clk)
+{
+	return CONFIG_SYS_AT91_SLOW_CLOCK;
+}
+
+static struct clk_ops at91_slow_clk_ops = {
+	.enable = at91_slow_clk_enable,
+	.get_rate = at91_slow_clk_get_rate,
+};
+
+static const struct udevice_id at91_slow_clk_match[] = {
+	{ .compatible = "atmel,at91sam9x5-clk-slow" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_slow_clk) = {
+	.name = "at91-slow-clk",
+	.id = UCLASS_CLK,
+	.of_match = at91_slow_clk_match,
+	.ops = &at91_slow_clk_ops,
+};
+
+/* Master clock specific code. */
+static ulong at91_master_clk_get_rate(struct clk *clk)
+{
+	return gd->arch.mck_rate_hz;
+}
+
+static struct clk_ops at91_master_clk_ops = {
+	.get_rate = at91_master_clk_get_rate,
+};
+
+static const struct udevice_id at91_master_clk_match[] = {
+	{ .compatible = "atmel,at91rm9200-clk-master" },
+	{ .compatible = "atmel,at91sam9x5-clk-master" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_master_clk) = {
+	.name = "at91-master-clk",
+	.id = UCLASS_CLK,
+	.of_match = at91_master_clk_match,
+	.ops = &at91_master_clk_ops,
+};
+
+/* Main osc clock specific code. */
+static int main_osc_clk_enable(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+
+	if (readl(&pmc->sr) & AT91_PMC_MOSCSELS)
+		return 0;
+
+	return -EINVAL;
+}
+
+static ulong main_osc_clk_get_rate(struct clk *clk)
+{
+	return gd->arch.main_clk_rate_hz;
+}
+
+static struct clk_ops main_osc_clk_ops = {
+	.enable = main_osc_clk_enable,
+	.get_rate = main_osc_clk_get_rate,
+};
+
+static int main_osc_clk_probe(struct udevice *dev)
+{
+	return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id main_osc_clk_match[] = {
+	{ .compatible = "atmel,at91sam9x5-clk-main" },
+	{}
+};
+
+U_BOOT_DRIVER(at91sam9x5_main_osc_clk) = {
+	.name = "at91sam9x5-main-osc-clk",
+	.id = UCLASS_CLK,
+	.of_match = main_osc_clk_match,
+	.probe = main_osc_clk_probe,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &main_osc_clk_ops,
+};
+
+/* PLLA clock specific code. */
+static int plla_clk_enable(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+
+	if (readl(&pmc->sr) & AT91_PMC_LOCKA)
+		return 0;
+
+	return -EINVAL;
+}
+
+static ulong plla_clk_get_rate(struct clk *clk)
+{
+	return gd->arch.plla_rate_hz;
+}
+
+static struct clk_ops plla_clk_ops = {
+	.enable = plla_clk_enable,
+	.get_rate = plla_clk_get_rate,
+};
+
+static int plla_clk_probe(struct udevice *dev)
+{
+	return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id plla_clk_match[] = {
+	{ .compatible = "atmel,sama5d3-clk-pll" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_plla_clk) = {
+	.name = "at91-plla-clk",
+	.id = UCLASS_CLK,
+	.of_match = plla_clk_match,
+	.probe = plla_clk_probe,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &plla_clk_ops,
+};
+
+/* PLLA DIV clock specific code. */
+static int at91_plladiv_clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static ulong at91_plladiv_clk_get_rate(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct clk source;
+	ulong clk_rate;
+	int ret;
+
+	ret = clk_get_by_index(clk->dev, 0, &source);
+	if (ret)
+		return -EINVAL;
+
+	clk_rate = clk_get_rate(&source);
+	if (readl(&pmc->mckr) & AT91_PMC_MCKR_PLLADIV_2)
+		clk_rate /= 2;
+
+	return clk_rate;
+}
+
+static ulong at91_plladiv_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct clk source;
+	ulong parent_rate;
+	int ret;
+
+	ret = clk_get_by_index(clk->dev, 0, &source);
+	if (ret)
+		return -EINVAL;
+
+	parent_rate = clk_get_rate(&source);
+	if ((parent_rate != rate) && ((parent_rate) / 2 != rate))
+		return -EINVAL;
+
+	if (parent_rate != rate) {
+		writel((readl(&pmc->mckr) | AT91_PMC_MCKR_PLLADIV_2),
+		       &pmc->mckr);
+	}
+
+	return 0;
+}
+
+static struct clk_ops at91_plladiv_clk_ops = {
+	.enable = at91_plladiv_clk_enable,
+	.get_rate = at91_plladiv_clk_get_rate,
+	.set_rate = at91_plladiv_clk_set_rate,
+};
+
+static int at91_plladiv_clk_probe(struct udevice *dev)
+{
+	return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id at91_plladiv_clk_match[] = {
+	{ .compatible = "atmel,at91sam9x5-clk-plldiv" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_plladiv_clk) = {
+	.name = "at91-plladiv-clk",
+	.id = UCLASS_CLK,
+	.of_match = at91_plladiv_clk_match,
+	.probe = at91_plladiv_clk_probe,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &at91_plladiv_clk_ops,
+};
+
+/* System clock specific code. */
+#define SYSTEM_MAX_ID		31
+
+/**
+ * at91_system_clk_bind() - for the system clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+static int at91_system_clk_bind(struct udevice *dev)
+{
+	return at91_clk_sub_device_bind(dev, "system-clk");
+}
+
+static const struct udevice_id at91_system_clk_match[] = {
+	{ .compatible = "atmel,at91rm9200-clk-system" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_system_clk) = {
+	.name = "at91-system-clk",
+	.id = UCLASS_MISC,
+	.of_match = at91_system_clk_match,
+	.bind = at91_system_clk_bind,
+};
+
+static inline int is_pck(int id)
+{
+	return (id >= 8) && (id <= 15);
+}
+
+static ulong system_clk_get_rate(struct clk *clk)
+{
+	struct clk clk_dev;
+	int ret;
+
+	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
+	if (ret)
+		return -EINVAL;
+
+	return clk_get_rate(&clk_dev);
+}
+
+static ulong system_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct clk clk_dev;
+	int ret;
+
+	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
+	if (ret)
+		return -EINVAL;
+
+	return clk_set_rate(&clk_dev, rate);
+}
+
+static int system_clk_enable(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	u32 mask;
+
+	if (clk->id > SYSTEM_MAX_ID)
+		return -EINVAL;
+
+	mask = BIT(clk->id);
+
+	writel(mask, &pmc->scer);
+
+	/**
+	 * For the programmable clocks the Ready status in the PMC
+	 * status register should be checked after enabling.
+	 * For other clocks this is unnecessary.
+	 */
+	if (!is_pck(clk->id))
+		return 0;
+
+	while (!(readl(&pmc->sr) & mask))
+		;
+
+	return 0;
+}
+
+static struct clk_ops system_clk_ops = {
+	.of_xlate = at91_clk_of_xlate,
+	.get_rate = system_clk_get_rate,
+	.set_rate = system_clk_set_rate,
+	.enable = system_clk_enable,
+};
+
+U_BOOT_DRIVER(system_clk) = {
+	.name = "system-clk",
+	.id = UCLASS_CLK,
+	.probe = at91_clk_probe,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &system_clk_ops,
+};
+
+/* Peripheral clock specific code. */
+#define PERIPHERAL_ID_MIN	2
+#define PERIPHERAL_ID_MAX	31
+#define PERIPHERAL_MASK(id)	(1 << ((id) & PERIPHERAL_ID_MAX))
+
+enum periph_clk_type {
+	CLK_PERIPH_AT91RM9200 = 0,
+	CLK_PERIPH_AT91SAM9X5,
+};
+
+/**
+ * sam9x5_periph_clk_bind() - for the periph clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+static int sam9x5_periph_clk_bind(struct udevice *dev)
+{
+	return at91_clk_sub_device_bind(dev, "periph-clk");
+}
+
+static const struct udevice_id sam9x5_periph_clk_match[] = {
+	{
+		.compatible = "atmel,at91rm9200-clk-peripheral",
+		.data = CLK_PERIPH_AT91RM9200,
+	},
+	{
+		.compatible = "atmel,at91sam9x5-clk-peripheral",
+		.data = CLK_PERIPH_AT91SAM9X5,
+	},
+	{}
+};
+
+U_BOOT_DRIVER(sam9x5_periph_clk) = {
+	.name = "sam9x5-periph-clk",
+	.id = UCLASS_MISC,
+	.of_match = sam9x5_periph_clk_match,
+	.bind = sam9x5_periph_clk_bind,
+};
+
+static int periph_clk_enable(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	enum periph_clk_type clk_type;
+	void *addr;
+
+	if (clk->id < PERIPHERAL_ID_MIN)
+		return -1;
+
+	clk_type = dev_get_driver_data(dev_get_parent(clk->dev));
+	if (clk_type == CLK_PERIPH_AT91RM9200) {
+		addr = &pmc->pcer;
+		if (clk->id > PERIPHERAL_ID_MAX)
+			addr = &pmc->pcer1;
+
+		setbits_le32(addr, PERIPHERAL_MASK(clk->id));
+	} else {
+		writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
+		setbits_le32(&pmc->pcr,
+			     AT91_PMC_PCR_CMD_WRITE | AT91_PMC_PCR_EN);
+	}
+
+	return 0;
+}
+
+static ulong periph_get_rate(struct clk *clk)
+{
+	struct udevice *dev;
+	struct clk clk_dev;
+	ulong clk_rate;
+	int ret;
+
+	dev = dev_get_parent(clk->dev);
+
+	ret = clk_get_by_index(dev, 0, &clk_dev);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(&clk_dev);
+
+	clk_free(&clk_dev);
+
+	return clk_rate;
+}
+
+static struct clk_ops periph_clk_ops = {
+	.of_xlate = at91_clk_of_xlate,
+	.enable = periph_clk_enable,
+	.get_rate = periph_get_rate,
+};
+
+U_BOOT_DRIVER(clk_periph) = {
+	.name	= "periph-clk",
+	.id	= UCLASS_CLK,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.probe = at91_clk_probe,
+	.ops	= &periph_clk_ops,
+};
+
+/* UTMI clock specific code. */
+#ifdef CONFIG_AT91_UTMI
+
+/*
+ * The purpose of this clock is to generate a 480 MHz signal. A different
+ * rate can't be configured.
+ */
+#define UTMI_RATE	480000000
+
+static int utmi_clk_enable(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct clk clk_dev;
+	ulong clk_rate;
+	u32 utmi_ref_clk_freq;
+	u32 tmp;
+	int err;
+	int timeout = 2000000;
+
+	if (readl(&pmc->sr) & AT91_PMC_LOCKU)
+		return 0;
+
+	/*
+	 * If mainck rate is different from 12 MHz, we have to configure the
+	 * FREQ field of the SFR_UTMICKTRIM register to generate properly
+	 * the utmi clock.
+	 */
+	err = clk_get_by_index(clk->dev, 0, &clk_dev);
+	if (err)
+		return -EINVAL;
+
+	clk_rate = clk_get_rate(&clk_dev);
+	switch (clk_rate) {
+	case 12000000:
+		utmi_ref_clk_freq = 0;
+		break;
+	case 16000000:
+		utmi_ref_clk_freq = 1;
+		break;
+	case 24000000:
+		utmi_ref_clk_freq = 2;
+		break;
+	/*
+	 * Not supported on SAMA5D2 but it's not an issue since MAINCK
+	 * maximum value is 24 MHz.
+	 */
+	case 48000000:
+		utmi_ref_clk_freq = 3;
+		break;
+	default:
+		printf("UTMICK: unsupported mainck rate\n");
+		return -EINVAL;
+	}
+
+	if (plat->regmap_sfr) {
+		err = regmap_read(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, &tmp);
+		if (err)
+			return -EINVAL;
+
+		tmp &= ~AT91_UTMICKTRIM_FREQ;
+		tmp |= utmi_ref_clk_freq;
+		err = regmap_write(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, tmp);
+		if (err)
+			return -EINVAL;
+	} else if (utmi_ref_clk_freq) {
+		printf("UTMICK: sfr node required\n");
+		return -EINVAL;
+	}
+
+	tmp = readl(&pmc->uckr);
+	tmp |= AT91_PMC_UPLLEN |
+	       AT91_PMC_UPLLCOUNT |
+	       AT91_PMC_BIASEN;
+	writel(tmp, &pmc->uckr);
+
+	while ((--timeout) && !(readl(&pmc->sr) & AT91_PMC_LOCKU))
+		;
+	if (!timeout) {
+		printf("UTMICK: timeout waiting for UPLL lock\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static ulong utmi_clk_get_rate(struct clk *clk)
+{
+	/* UTMI clk rate is fixed. */
+	return UTMI_RATE;
+}
+
+static struct clk_ops utmi_clk_ops = {
+	.enable = utmi_clk_enable,
+	.get_rate = utmi_clk_get_rate,
+};
+
+static int utmi_clk_ofdata_to_platdata(struct udevice *dev)
+{
+	struct pmc_platdata *plat = dev_get_platdata(dev);
+	struct udevice *syscon;
+
+	uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
+				     "regmap-sfr", &syscon);
+
+	if (syscon)
+		plat->regmap_sfr = syscon_get_regmap(syscon);
+
+	return 0;
+}
+
+static int utmi_clk_probe(struct udevice *dev)
+{
+	return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id utmi_clk_match[] = {
+	{ .compatible = "atmel,at91sam9x5-clk-utmi" },
+	{}
+};
+
+U_BOOT_DRIVER(at91sam9x5_utmi_clk) = {
+	.name = "at91sam9x5-utmi-clk",
+	.id = UCLASS_CLK,
+	.of_match = utmi_clk_match,
+	.probe = utmi_clk_probe,
+	.ofdata_to_platdata = utmi_clk_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &utmi_clk_ops,
+};
+
+#endif /* CONFIG_AT91_UTMI */
+
+/* H32MX clock specific code. */
+#ifdef CONFIG_AT91_H32MX
+
+#define H32MX_MAX_FREQ	90000000
+
+static ulong sama5d4_h32mx_clk_get_rate(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	ulong rate = gd->arch.mck_rate_hz;
+
+	if (readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV)
+		rate /= 2;
+
+	if (rate > H32MX_MAX_FREQ)
+		dev_dbg(clk->dev, "H32MX clock is too fast\n");
+
+	return rate;
+}
+
+static struct clk_ops sama5d4_h32mx_clk_ops = {
+	.get_rate = sama5d4_h32mx_clk_get_rate,
+};
+
+static int sama5d4_h32mx_clk_probe(struct udevice *dev)
+{
+	return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id sama5d4_h32mx_clk_match[] = {
+	{ .compatible = "atmel,sama5d4-clk-h32mx" },
+	{}
+};
+
+U_BOOT_DRIVER(sama5d4_h32mx_clk) = {
+	.name = "sama5d4-h32mx-clk",
+	.id = UCLASS_CLK,
+	.of_match = sama5d4_h32mx_clk_match,
+	.probe = sama5d4_h32mx_clk_probe,
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &sama5d4_h32mx_clk_ops,
+};
+
+#endif /* CONFIG_AT91_H32MX */
+
+/* Generic clock specific code. */
+#ifdef CONFIG_AT91_GENERIC_CLK
+
+#define GENERATED_SOURCE_MAX	6
+#define GENERATED_MAX_DIV	255
+
+/**
+ * generated_clk_bind() - for the generated clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+static int generated_clk_bind(struct udevice *dev)
+{
+	return at91_clk_sub_device_bind(dev, "generic-clk");
+}
+
+static const struct udevice_id generated_clk_match[] = {
+	{ .compatible = "atmel,sama5d2-clk-generated" },
+	{}
+};
+
+U_BOOT_DRIVER(generated_clk) = {
+	.name = "generated-clk",
+	.id = UCLASS_MISC,
+	.of_match = generated_clk_match,
+	.bind = generated_clk_bind,
+};
+
+struct generic_clk_priv {
+	u32 num_parents;
+};
+
+static ulong generic_clk_get_rate(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct clk parent;
+	ulong clk_rate;
+	u32 tmp, gckdiv;
+	u8 clock_source, parent_index;
+	int ret;
+
+	writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
+	tmp = readl(&pmc->pcr);
+	clock_source = (tmp >> AT91_PMC_PCR_GCKCSS_OFFSET) &
+		    AT91_PMC_PCR_GCKCSS_MASK;
+	gckdiv = (tmp >> AT91_PMC_PCR_GCKDIV_OFFSET) & AT91_PMC_PCR_GCKDIV_MASK;
+
+	parent_index = clock_source - 1;
+	ret = clk_get_by_index(dev_get_parent(clk->dev), parent_index, &parent);
+	if (ret)
+		return 0;
+
+	clk_rate = clk_get_rate(&parent) / (gckdiv + 1);
+
+	clk_free(&parent);
+
+	return clk_rate;
+}
+
+static ulong generic_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct generic_clk_priv *priv = dev_get_priv(clk->dev);
+	struct clk parent, best_parent;
+	ulong tmp_rate, best_rate = rate, parent_rate;
+	int tmp_diff, best_diff = -1;
+	u32 div, best_div = 0;
+	u8 best_parent_index, best_clock_source = 0;
+	u8 i;
+	u32 tmp;
+	int ret;
+
+	for (i = 0; i < priv->num_parents; i++) {
+		ret = clk_get_by_index(dev_get_parent(clk->dev), i, &parent);
+		if (ret)
+			return ret;
+
+		parent_rate = clk_get_rate(&parent);
+		if (IS_ERR_VALUE(parent_rate))
+			return parent_rate;
+
+		for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
+			tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
+			tmp_diff = abs(rate - tmp_rate);
+
+			if (best_diff < 0 || best_diff > tmp_diff) {
+				best_rate = tmp_rate;
+				best_diff = tmp_diff;
+
+				best_div = div - 1;
+				best_parent = parent;
+				best_parent_index = i;
+				best_clock_source = best_parent_index + 1;
+			}
+
+			if (!best_diff || tmp_rate < rate)
+				break;
+		}
+
+		if (!best_diff)
+			break;
+	}
+
+	debug("GCK: best parent: %s, best_rate = %ld, best_div = %d\n",
+	      best_parent.dev->name, best_rate, best_div);
+
+	ret = clk_enable(&best_parent);
+	if (ret)
+		return ret;
+
+	writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
+	tmp = readl(&pmc->pcr);
+	tmp &= ~(AT91_PMC_PCR_GCKDIV | AT91_PMC_PCR_GCKCSS);
+	tmp |= AT91_PMC_PCR_GCKCSS_(best_clock_source) |
+	       AT91_PMC_PCR_CMD_WRITE |
+	       AT91_PMC_PCR_GCKDIV_(best_div) |
+	       AT91_PMC_PCR_GCKEN;
+	writel(tmp, &pmc->pcr);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_GCKRDY))
+		;
+
+	return 0;
+}
+
+static struct clk_ops generic_clk_ops = {
+	.of_xlate = at91_clk_of_xlate,
+	.get_rate = generic_clk_get_rate,
+	.set_rate = generic_clk_set_rate,
+};
+
+static int generic_clk_ofdata_to_platdata(struct udevice *dev)
+{
+	struct generic_clk_priv *priv = dev_get_priv(dev);
+	u32 cells[GENERATED_SOURCE_MAX];
+	u32 num_parents;
+
+	num_parents = fdtdec_get_int_array_count(gd->fdt_blob,
+			dev_of_offset(dev_get_parent(dev)), "clocks", cells,
+			GENERATED_SOURCE_MAX);
+
+	if (!num_parents)
+		return -1;
+
+	priv->num_parents = num_parents;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(generic_clk) = {
+	.name = "generic-clk",
+	.id = UCLASS_CLK,
+	.probe = at91_clk_probe,
+	.ofdata_to_platdata = generic_clk_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct generic_clk_priv),
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &generic_clk_ops,
+};
+
+#endif /* CONFIG_AT91_GENERIC_CLK */
+
+/* USB clock specific code. */
+#ifdef CONFIG_AT91_USB_CLK
+
+#define AT91_USB_CLK_SOURCE_MAX	2
+#define AT91_USB_CLK_MAX_DIV	15
+
+struct at91_usb_clk_priv {
+	u32 num_clksource;
+};
+
+static ulong at91_usb_clk_get_rate(struct clk *clk)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct clk source;
+	u32 tmp, usbdiv;
+	u8 source_index;
+	int ret;
+
+	tmp = readl(&pmc->pcr);
+	source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) &
+			AT91_PMC_USB_USBS_MASK;
+	usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK;
+
+	ret = clk_get_by_index(clk->dev, source_index, &source);
+	if (ret)
+		return 0;
+
+	return clk_get_rate(&source) / (usbdiv + 1);
+}
+
+static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+	struct at91_pmc *pmc = plat->reg_base;
+	struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev);
+	struct clk source, best_source;
+	ulong tmp_rate, best_rate = rate, source_rate;
+	int tmp_diff, best_diff = -1;
+	u32 div, best_div = 0;
+	u8 best_source_index = 0;
+	u8 i;
+	u32 tmp;
+	int ret;
+
+	for (i = 0; i < priv->num_clksource; i++) {
+		ret = clk_get_by_index(clk->dev, i, &source);
+		if (ret)
+			return ret;
+
+		source_rate = clk_get_rate(&source);
+		if (IS_ERR_VALUE(source_rate))
+			return source_rate;
+
+		for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) {
+			tmp_rate = DIV_ROUND_CLOSEST(source_rate, div);
+			tmp_diff = abs(rate - tmp_rate);
+
+			if (best_diff < 0 || best_diff > tmp_diff) {
+				best_rate = tmp_rate;
+				best_diff = tmp_diff;
+
+				best_div = div - 1;
+				best_source = source;
+				best_source_index = i;
+			}
+
+			if (!best_diff || tmp_rate < rate)
+				break;
+		}
+
+		if (!best_diff)
+			break;
+	}
+
+	debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n",
+	      best_source.dev->name, best_rate, best_div);
+
+	ret = clk_enable(&best_source);
+	if (ret)
+		return ret;
+
+	tmp = AT91_PMC_USB_USBS_(best_source_index) |
+	      AT91_PMC_USB_DIV_(best_div);
+	writel(tmp, &pmc->usb);
+
+	return 0;
+}
+
+static struct clk_ops at91_usb_clk_ops = {
+	.get_rate = at91_usb_clk_get_rate,
+	.set_rate = at91_usb_clk_set_rate,
+};
+
+static int at91_usb_clk_ofdata_to_platdata(struct udevice *dev)
+{
+	struct at91_usb_clk_priv *priv = dev_get_priv(dev);
+	u32 cells[AT91_USB_CLK_SOURCE_MAX];
+	u32 num_clksource;
+
+	num_clksource = fdtdec_get_int_array_count(gd->fdt_blob,
+						   dev_of_offset(dev),
+						   "clocks", cells,
+						   AT91_USB_CLK_SOURCE_MAX);
+
+	if (!num_clksource)
+		return -1;
+
+	priv->num_clksource = num_clksource;
+
+	return 0;
+}
+
+static int at91_usb_clk_probe(struct udevice *dev)
+{
+	return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id at91_usb_clk_match[] = {
+	{ .compatible = "atmel,at91sam9x5-clk-usb" },
+	{}
+};
+
+U_BOOT_DRIVER(at91_usb_clk) = {
+	.name = "at91-usb-clk",
+	.id = UCLASS_CLK,
+	.of_match = at91_usb_clk_match,
+	.probe = at91_usb_clk_probe,
+	.ofdata_to_platdata = at91_usb_clk_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct at91_usb_clk_priv),
+	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+	.ops = &at91_usb_clk_ops,
+};
+
+#endif /* CONFIG_AT91_USB_CLK */
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 77204a433f91..29c6452497b7 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -4,122 +4,8 @@
  *               Wenyou.Yang <wenyou.yang@atmel.com>
  */
 
+#include <asm/io.h>
 #include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <log.h>
-#include <dm/lists.h>
-#include <dm/util.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const struct udevice_id at91_pmc_match[] = {
-	{ .compatible = "atmel,at91rm9200-pmc" },
-	{ .compatible = "atmel,at91sam9260-pmc" },
-	{ .compatible = "atmel,at91sam9g45-pmc" },
-	{ .compatible = "atmel,at91sam9n12-pmc" },
-	{ .compatible = "atmel,at91sam9x5-pmc" },
-	{ .compatible = "atmel,sama5d3-pmc" },
-	{ .compatible = "atmel,sama5d2-pmc" },
-	{}
-};
-
-U_BOOT_DRIVER(atmel_at91rm9200_pmc) = {
-	.name = "atmel_at91rm9200_pmc",
-	.id = UCLASS_SIMPLE_BUS,
-	.of_match = at91_pmc_match,
-};
-
-U_BOOT_DRIVER_ALIAS(atmel_at91rm9200_pmc, atmel_at91sam9260_pmc)
-
-/*---------------------------------------------------------*/
-
-int at91_pmc_core_probe(struct udevice *dev)
-{
-	struct pmc_platdata *plat = dev_get_platdata(dev);
-
-	dev = dev_get_parent(dev);
-
-	plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev);
-
-	return 0;
-}
-
-/**
- * at91_clk_sub_device_bind() - for the at91 clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name)
-{
-	const void *fdt = gd->fdt_blob;
-	int offset = dev_of_offset(dev);
-	bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
-	const char *name;
-	int ret;
-
-	for (offset = fdt_first_subnode(fdt, offset);
-	     offset > 0;
-	     offset = fdt_next_subnode(fdt, offset)) {
-		if (pre_reloc_only &&
-		    !ofnode_pre_reloc(offset_to_ofnode(offset)))
-			continue;
-		/*
-		 * If this node has "compatible" property, this is not
-		 * a clock sub-node, but a normal device. skip.
-		 */
-		fdt_get_property(fdt, offset, "compatible", &ret);
-		if (ret >= 0)
-			continue;
-
-		if (ret != -FDT_ERR_NOTFOUND)
-			return ret;
-
-		name = fdt_get_name(fdt, offset, NULL);
-		if (!name)
-			return -EINVAL;
-		ret = device_bind_driver_to_node(dev, drv_name, name,
-					offset_to_ofnode(offset), NULL);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
-{
-	int periph;
-
-	if (args->args_count) {
-		debug("Invalid args_count: %d\n", args->args_count);
-		return -EINVAL;
-	}
-
-	periph = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(clk->dev), "reg",
-				 -1);
-	if (periph < 0)
-		return -EINVAL;
-
-	clk->id = periph;
-
-	return 0;
-}
-
-int at91_clk_probe(struct udevice *dev)
-{
-	struct udevice *dev_periph_container, *dev_pmc;
-	struct pmc_platdata *plat = dev_get_platdata(dev);
-
-	dev_periph_container = dev_get_parent(dev);
-	dev_pmc = dev_get_parent(dev_periph_container);
-
-	plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev_pmc);
-
-	return 0;
-}
 
 /**
  * pmc_read() - read content at address base + off into val
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index b1ab0a95c855..33ded02156c8 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -7,7 +7,6 @@
 #ifndef __AT91_PMC_H__
 #define __AT91_PMC_H__
 
-#include <regmap.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
 
@@ -15,17 +14,6 @@
 #define AT91_TO_CLK_ID(_t, _i)		(((_t) << 8) | ((_i) & 0xff))
 #define AT91_CLK_ID_TO_DID(_i)		((_i) & 0xff)
 
-struct pmc_platdata {
-	struct at91_pmc *reg_base;
-	struct regmap *regmap_sfr;
-};
-
-int at91_pmc_core_probe(struct udevice *dev);
-int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name);
-
-int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args);
-int at91_clk_probe(struct udevice *dev);
-
 int at91_clk_mux_val_to_index(const u32 *table, u32 num_parents, u32 val);
 int at91_clk_mux_index_to_val(const u32 *table, u32 num_parents, u32 index);
 
@@ -33,4 +21,5 @@ void pmc_read(void __iomem *base, unsigned int off, unsigned int *val);
 void pmc_write(void __iomem *base, unsigned int off, unsigned int val);
 void pmc_update_bits(void __iomem *base, unsigned int off, unsigned int mask,
 			unsigned int bits);
+
 #endif
diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
deleted file mode 100644
index a879b008ffd6..000000000000
--- a/drivers/clk/at91/sckc.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- *               Wenyou.Yang <wenyou.yang@atmel.com>
- */
-
-#include <common.h>
-#include <dm.h>
-
-static const struct udevice_id at91_sckc_match[] = {
-	{ .compatible = "atmel,at91sam9x5-sckc" },
-	{}
-};
-
-U_BOOT_DRIVER(at91_sckc) = {
-	.name = "at91-sckc",
-	.id = UCLASS_SIMPLE_BUS,
-	.of_match = at91_sckc_match,
-};
