From patchwork Wed Aug 5 15:11:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Claudiu Beznea X-Patchwork-Id: 1341264 X-Patchwork-Delegate: eugen.hristev@microchip.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=quarantine dis=none) header.from=microchip.com Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=microchip.com header.i=@microchip.com header.a=rsa-sha256 header.s=mchp header.b=fKkQyCkK; dkim-atps=neutral Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4BMFWq20qVz9sRK for ; Thu, 6 Aug 2020 01:13:58 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 35A3882176; Wed, 5 Aug 2020 17:12:38 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=fail (p=quarantine dis=none) header.from=microchip.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=microchip.com header.i=@microchip.com header.b="fKkQyCkK"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 406B1821B7; Wed, 5 Aug 2020 17:12:33 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,RCVD_IN_MSPIKE_H4,RCVD_IN_MSPIKE_WL, SPF_HELO_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.2 Received: from esa3.microchip.iphmx.com (esa3.microchip.iphmx.com [68.232.153.233]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 1AE228218C for ; Wed, 5 Aug 2020 17:12:27 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=microchip.com Authentication-Results: phobos.denx.de; spf=fail smtp.mailfrom=Claudiu.Beznea@microchip.com DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1596640348; x=1628176348; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=RYLf7/zUOlXjqTHWhqq+4zkJi8PUqMcvc7h2lmP98ek=; b=fKkQyCkKa434Gm32EMoHcVE6LuaAetYQhpClESeQtFhk/+HKWANQiIk/ EIrBSN7bNdoFJsl8upPx+++i7dvtiCb3oPUnfEK9I35pXnxhNuBpRMulI ynvNTyopedSP5fdqRFYk6ukHw/Q3eFeQNZcbbkF0XsQODITh8ZC6ykYzK nJorwhh0RCnrHM/or9ouqVzcC+IUpM1T3KU+f4ele3MHy03V4RTtqZuWl HOzhG5w16Eol5mLNK8A2atE37nDuVIyiFgKENOdnpe4tNp2Kb14vo5CAW ATtEGfjKoRxEMIrl92beioydxUSy7GzFmJTCGwz+1q97ZcY6KdFv3rmDS g==; IronPort-SDR: A33GlT3gjAx/eLYWSC394+LroSWBT/O4xuCJZ9tMYeggbyZspdjLdUSEPpibrl3amF0n5eT/ed EU4Xktc2jhxtWoACKscw/s+vKG6XkJT11zk3yQzx/PZ8TkzQ1IYM283tN52rWUzDuFs7XugXPe kM8KGJBq53bqmT8yelA5QG9qaJ6XJG82pwHVMLBWuAP/ebAQdHhhnOdCXwbUU+37pEhu8GjYmj l10UDdSeUFYmLMZG02DmIpOFYVqUptpjiLmXVZMWk+04vVnklCi8ThBYxljEBU+5zhN+ZT+V5A Zo8= X-IronPort-AV: E=Sophos;i="5.75,438,1589266800"; d="scan'208";a="86800080" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa3.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 05 Aug 2020 08:12:22 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1979.3; Wed, 5 Aug 2020 08:12:20 -0700 Received: from m18063-ThinkPad-T460p.microchip.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.1979.3 via Frontend Transport; Wed, 5 Aug 2020 08:12:17 -0700 From: Claudiu Beznea To: , CC: , Claudiu Beznea Subject: [PATCH v2 06/21] clk: at91: add pre-requisite headers for AT91 clock architecture Date: Wed, 5 Aug 2020 18:11:50 +0300 Message-ID: <1596640325-20014-7-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1596640325-20014-1-git-send-email-claudiu.beznea@microchip.com> References: <1596640325-20014-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.34 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de X-Virus-Status: Clean Add pre-requisite headers for AT91 clock architecture. These are based on already present files on Linux and will be used by following commits for AT91 CCF clock drivers. Signed-off-by: Claudiu Beznea --- include/dt-bindings/clk/at91.h | 22 ++++ include/linux/clk/at91_pmc.h | 247 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 269 insertions(+) create mode 100644 include/dt-bindings/clk/at91.h create mode 100644 include/linux/clk/at91_pmc.h diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h new file mode 100644 index 000000000000..e30756b2804a --- /dev/null +++ b/include/dt-bindings/clk/at91.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This header provides constants for AT91 pmc status. + * The constants defined in this header are being used in dts and PMC code. + * + * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries + * + * Author: Claudiu Beznea + * + * Based on include/dt-bindings/clock/at91.h on Linux. + */ + +#ifndef _DT_BINDINGS_CLK_AT91_H +#define _DT_BINDINGS_CLK_AT91_H + +#define PMC_TYPE_CORE 1 +#define PMC_TYPE_SYSTEM 2 +#define PMC_TYPE_PERIPHERAL 3 +#define PMC_TYPE_GCK 4 +#define PMC_TYPE_SLOW 5 + +#endif diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h new file mode 100644 index 000000000000..ee39e72e2b39 --- /dev/null +++ b/include/linux/clk/at91_pmc.h @@ -0,0 +1,247 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Power Management Controller (PMC) - System peripherals registers. + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Based on AT91RM9200 datasheet revision E. + * Based on include/linux/clk/at91_pmc.h on Linux. + */ + +#ifndef AT91_PMC_H_ +#define AT91_PMC_H_ + +#define AT91_PMC_V1 (1) /* PMC version 1 */ +#define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */ + +#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ +#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ + +#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PLL_CTRL0 0x0C /* PLL Control Register 0 [for SAM9X60] */ +#define AT91_PMC_PLL_CTRL0_ENPLL (1 << 28) /* Enable PLL */ +#define AT91_PMC_PLL_CTRL0_ENPLLCK (1 << 29) /* Enable PLL clock for PMC */ +#define AT91_PMC_PLL_CTRL0_ENLOCK (1 << 31) /* Enable PLL lock */ + +#define AT91_PMC_PLL_CTRL1 0x10 /* PLL Control Register 1 [for SAM9X60] */ + +#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ + +#define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */ +#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */ +#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */ +#define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */ +#define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */ + +#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ +#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ +#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ + +#define AT91_PMC_PLL_UPDT 0x1C /* PMC PLL update register [for SAM9X60] */ +#define AT91_PMC_PLL_UPDT_ID_MSK (0xf) +#define AT91_PMC_PLL_UPDT_UPDATE (1 << 8) /* Update PLL settings */ +#define AT91_PMC_PLL_UPDT_ID (1 << 0) /* PLL ID */ +#define AT91_PMC_PLL_UPDT_STUPTIM(n) ((n) << 16) /* Startup time */ +#define AT91_PMC_PMM_UPDT_STUPTIM_MSK (0xff << 16) + +#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ +#define AT91_PMC_WAITMODE (1 << 2) /* Wait Mode Command */ +#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_PMC_KEY_MASK (0xff << 16) +#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ +#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ + +#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ +#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) +#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ +#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_CPU_CKR 0x28 /* CPU Clock Register */ + +#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ +#define PMC_PRES_OFFSET 2 +#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) +#define PMC_ALT_PRES_OFFSET 4 +#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ +#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) +#define AT91_PMC_H32MXDIV BIT(24) + +#define AT91_PMC_XTALF 0x34 /* Main XTAL Frequency Register [SAMA7G5 only] */ + +#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ +#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) +#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) + +#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ +#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ +#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ +#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) + +#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ +#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) + +#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ +#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ +#define AT91_PMC_SR 0x68 /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ +#define AT91_PMC_OSCSEL (1 << 7) /* Slow Oscillator Selection [some SAM9] */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ +#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ +#define AT91_PMC_GCKRDY (1 << 24) /* Generated Clocks */ +#define AT91_PMC_MCKXRDY (1 << 26) /* Master Clock x [x=1..4] Ready Status */ +#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ + +#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */ +#define AT91_PMC_FSTT(n) BIT(n) +#define AT91_PMC_RTTAL BIT(16) +#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */ +#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */ +#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */ +#define AT91_PMC_LPM BIT(20) /* Low-power Mode */ +#define AT91_PMC_RXLP_MCE BIT(24) /* Backup UART Receive Enable */ +#define AT91_PMC_ACC_CE BIT(25) /* ACC Enable */ + +#define AT91_PMC_FSPR 0x74 /* Fast Startup Polarity Reg */ + +#define AT91_PMC_FS_INPUT_MASK 0x7ff + +#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */ + +#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ +#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ +#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ +#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ + +#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ +#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ +#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ + +#define AT91_PMC_PLL_ISR0 0xEC /* PLL Interrupt Status Register 0 [SAM9X60 only] */ + +#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ +#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ +#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ + +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ +#define AT91_PMC_PCR_PID_MASK 0x3f +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ +#define AT91_PMC_PCR_GCKDIV_MASK GENMASK(27, 20) +#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ +#define AT91_PMC_PCR_GCKEN (0x1 << 29) /* GCK Enable */ + +#define AT91_PMC_AUDIO_PLL0 0x14c +#define AT91_PMC_AUDIO_PLL_PLLEN (1 << 0) +#define AT91_PMC_AUDIO_PLL_PADEN (1 << 1) +#define AT91_PMC_AUDIO_PLL_PMCEN (1 << 2) +#define AT91_PMC_AUDIO_PLL_RESETN (1 << 3) +#define AT91_PMC_AUDIO_PLL_ND_OFFSET 8 +#define AT91_PMC_AUDIO_PLL_ND_MASK (0x7f << AT91_PMC_AUDIO_PLL_ND_OFFSET) +#define AT91_PMC_AUDIO_PLL_ND(n) ((n) << AT91_PMC_AUDIO_PLL_ND_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPMC_OFFSET 16 +#define AT91_PMC_AUDIO_PLL_QDPMC_MASK (0x7f << AT91_PMC_AUDIO_PLL_QDPMC_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPMC(n) ((n) << AT91_PMC_AUDIO_PLL_QDPMC_OFFSET) + +#define AT91_PMC_AUDIO_PLL1 0x150 +#define AT91_PMC_AUDIO_PLL_FRACR_MASK 0x3fffff +#define AT91_PMC_AUDIO_PLL_QDPAD_OFFSET 24 +#define AT91_PMC_AUDIO_PLL_QDPAD_MASK (0x7f << AT91_PMC_AUDIO_PLL_QDPAD_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPAD(n) ((n) << AT91_PMC_AUDIO_PLL_QDPAD_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET AT91_PMC_AUDIO_PLL_QDPAD_OFFSET +#define AT91_PMC_AUDIO_PLL_QDPAD_DIV_MASK (0x3 << AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPAD_DIV(n) ((n) << AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET 26 +#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX 0x1f +#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MASK (AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX << AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET) +#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV(n) ((n) << AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET) + +#endif