diff mbox series

[v8,04/12] arm: dts: sync dts for Action Semi S900

Message ID 1584811854-18027-5-git-send-email-amittomer25@gmail.com
State Superseded
Delegated to: Tom Rini
Headers show
Series Actions S700 SoC support | expand

Commit Message

Amit Tomer March 21, 2020, 5:30 p.m. UTC
Synchronize device tree bindings with v5.5-rc6 tag with commit id
"b3a987b0264d".

Also, it removes older clock binding defined for S900 along with undocumented
compatible string "actions,s900-serial" from serial driver and adapts clock
driver to cater to new bindings.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v7:
        * No changes.
Changes since v6:
	* Added Reviewed-by tag.
Changes since v5:
        * Moved it 04/11 from 03/11.
        * removed the undocumented compatible string "actions,s900-serial".
        * removed the reviewed-by tag.
Changes since v4:
        * This patch is re-ordered, moved from 07/11 to 03/11.
        * Used the commit-id(12 chars long) in commit message.
Changes since v3:
        * Added Reviewed-by: tag.
Changes since v2:
        * Newly added patch, not there in v2/v1.
---
 arch/arm/dts/s900.dtsi                         | 322 +++++++++++++++++++++++--
 drivers/clk/owl/clk_s900.c                     |   6 +-
 drivers/serial/serial_owl.c                    |   1 -
 include/dt-bindings/clock/actions,s900-cmu.h   | 129 ++++++++++
 include/dt-bindings/clock/s900_cmu.h           |  77 ------
 include/dt-bindings/reset/actions,s900-reset.h |  65 +++++
 6 files changed, 498 insertions(+), 102 deletions(-)
 create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h
 delete mode 100644 include/dt-bindings/clock/s900_cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
diff mbox series

Patch

diff --git a/arch/arm/dts/s900.dtsi b/arch/arm/dts/s900.dtsi
index 2bbb30a..eb35cf7 100644
--- a/arch/arm/dts/s900.dtsi
+++ b/arch/arm/dts/s900.dtsi
@@ -1,17 +1,94 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Device Tree Source for Actions Semi S900 SoC
-//
-// Copyright (C) 2015 Actions Semi Co., Ltd.
-// Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
 
-/dts-v1/;
-#include <dt-bindings/clock/s900_cmu.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
 
 / {
 	compatible = "actions,s900";
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
 
 	losc: losc {
 		compatible = "fixed-clock";
@@ -26,28 +103,231 @@ 
 	};
 
 	soc {
-		u-boot,dm-pre-reloc;
 		compatible = "simple-bus";
-		#address-cells = <0x2>;
-		#size-cells = <0x2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		uart5: serial@e012a000 {
-			u-boot,dm-pre-reloc;
-			compatible = "actions,s900-serial";
-			reg = <0x0 0xe012a000 0x0 0x1000>;
-			clocks = <&cmu CLOCK_UART5>;
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
 		cmu: clock-controller@e0160000 {
-			u-boot,dm-pre-reloc;
 			compatible = "actions,s900-cmu";
 			reg = <0x0 0xe0160000 0x0 0x1000>;
-			clocks = <&losc>, <&diff24M>;
-			clock-names = "losc", "diff24M";
+			clocks = <&hosc>, <&losc>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer@e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller@e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc@e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc@e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
 		};
 	};
 };
-
diff --git a/drivers/clk/owl/clk_s900.c b/drivers/clk/owl/clk_s900.c
index a7c15d2..d60f199 100644
--- a/drivers/clk/owl/clk_s900.c
+++ b/drivers/clk/owl/clk_s900.c
@@ -12,7 +12,7 @@ 
 #include <asm/arch-owl/regs_s900.h>
 #include <asm/io.h>
 
-#include <dt-bindings/clock/s900_cmu.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
 
 void owl_clk_init(struct owl_clk_priv *priv)
 {
@@ -78,7 +78,7 @@  int owl_clk_enable(struct clk *clk)
 	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
-	case CLOCK_UART5:
+	case CLK_UART5:
 		owl_uart_clk_enable(priv);
 		break;
 	default:
@@ -93,7 +93,7 @@  int owl_clk_disable(struct clk *clk)
 	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
-	case CLOCK_UART5:
+	case CLK_UART5:
 		owl_uart_clk_disable(priv);
 		break;
 	default:
diff --git a/drivers/serial/serial_owl.c b/drivers/serial/serial_owl.c
index 539acdc..bb60ca2 100644
--- a/drivers/serial/serial_owl.c
+++ b/drivers/serial/serial_owl.c
@@ -120,7 +120,6 @@  static const struct dm_serial_ops owl_serial_ops = {
 };
 
 static const struct udevice_id owl_serial_ids[] = {
-	{ .compatible =	"actions,s900-serial" },
 	{ .compatible = "actions,owl-uart" },
 	{ }
 };
diff --git a/include/dt-bindings/clock/actions,s900-cmu.h b/include/dt-bindings/clock/actions,s900-cmu.h
new file mode 100644
index 0000000..7c12515
--- /dev/null
+++ b/include/dt-bindings/clock/actions,s900-cmu.h
@@ -0,0 +1,129 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Device Tree binding constants for Actions Semi S900 Clock Management Unit
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_CLOCK_S900_CMU_H
+#define __DT_BINDINGS_CLOCK_S900_CMU_H
+
+#define CLK_NONE			0
+
+/* fixed rate clocks */
+#define CLK_LOSC			1
+#define CLK_HOSC			2
+
+/* pll clocks */
+#define CLK_CORE_PLL			3
+#define CLK_DEV_PLL			4
+#define CLK_DDR_PLL			5
+#define CLK_NAND_PLL			6
+#define CLK_DISPLAY_PLL			7
+#define CLK_DSI_PLL			8
+#define CLK_ASSIST_PLL			9
+#define CLK_AUDIO_PLL			10
+
+/* system clock */
+#define CLK_CPU				15
+#define CLK_DEV				16
+#define CLK_NOC				17
+#define CLK_NOC_MUX			18
+#define CLK_NOC_DIV			19
+#define CLK_AHB				20
+#define CLK_APB				21
+#define CLK_DMAC			22
+
+/* peripheral device clock */
+#define CLK_GPIO			23
+
+#define CLK_BISP			24
+#define CLK_CSI0			25
+#define CLK_CSI1			26
+
+#define CLK_DE0				27
+#define CLK_DE1				28
+#define CLK_DE2				29
+#define CLK_DE3				30
+#define CLK_DSI				32
+
+#define CLK_GPU				33
+#define CLK_GPU_CORE			34
+#define CLK_GPU_MEM			35
+#define CLK_GPU_SYS			36
+
+#define CLK_HDE				37
+#define CLK_I2C0			38
+#define CLK_I2C1			39
+#define CLK_I2C2			40
+#define CLK_I2C3			41
+#define CLK_I2C4			42
+#define CLK_I2C5			43
+#define CLK_I2SRX			44
+#define CLK_I2STX			45
+#define CLK_IMX				46
+#define CLK_LCD				47
+#define CLK_NAND0			48
+#define CLK_NAND1			49
+#define CLK_PWM0			50
+#define CLK_PWM1			51
+#define CLK_PWM2			52
+#define CLK_PWM3			53
+#define CLK_PWM4			54
+#define CLK_PWM5			55
+#define CLK_SD0				56
+#define CLK_SD1				57
+#define CLK_SD2				58
+#define CLK_SD3				59
+#define CLK_SENSOR			60
+#define CLK_SPEED_SENSOR		61
+#define CLK_SPI0			62
+#define CLK_SPI1			63
+#define CLK_SPI2			64
+#define CLK_SPI3			65
+#define CLK_THERMAL_SENSOR		66
+#define CLK_UART0			67
+#define CLK_UART1			68
+#define CLK_UART2			69
+#define CLK_UART3			70
+#define CLK_UART4			71
+#define CLK_UART5			72
+#define CLK_UART6			73
+#define CLK_VCE				74
+#define CLK_VDE				75
+
+#define CLK_USB3_480MPLL0		76
+#define CLK_USB3_480MPHY0		77
+#define CLK_USB3_5GPHY			78
+#define CLK_USB3_CCE			79
+#define CLK_USB3_MAC			80
+
+#define CLK_TIMER			83
+
+#define CLK_HDMI_AUDIO			84
+
+#define CLK_24M				85
+
+#define CLK_EDP				86
+
+#define CLK_24M_EDP			87
+#define CLK_EDP_PLL			88
+#define CLK_EDP_LINK			89
+
+#define CLK_USB2H0_PLLEN		90
+#define CLK_USB2H0_PHY			91
+#define CLK_USB2H0_CCE			92
+#define CLK_USB2H1_PLLEN		93
+#define CLK_USB2H1_PHY			94
+#define CLK_USB2H1_CCE			95
+
+#define CLK_DDR0			96
+#define CLK_DDR1			97
+#define CLK_DMM				98
+
+#define CLK_ETH_MAC			99
+#define CLK_RMII_REF			100
+
+#define CLK_NR_CLKS			(CLK_RMII_REF + 1)
+
+#endif /* __DT_BINDINGS_CLOCK_S900_CMU_H */
diff --git a/include/dt-bindings/clock/s900_cmu.h b/include/dt-bindings/clock/s900_cmu.h
deleted file mode 100644
index 2685a6d..0000000
--- a/include/dt-bindings/clock/s900_cmu.h
+++ /dev/null
@@ -1,77 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- *
- */
-
-#ifndef _DT_BINDINGS_CLOCK_S900_CMU_H_
-#define _DT_BINDINGS_CLOCK_S900_CMU_H_
-
-/* Module Clock ID */
-#define CLOCK_DDRCH1				0
-#define CLOCK_DMAC				1
-#define CLOCK_DDRCH0				2
-#define CLOCK_BROM				3
-#define CLOCK_NANDC0				4
-#define CLOCK_SD0				5
-#define CLOCK_SD1				6
-#define CLOCK_SD2				7
-#define CLOCK_DE				8
-#define CLOCK_LVDS				9
-#define CLOCK_EDP				10
-#define CLOCK_NANDC1				11
-#define CLOCK_DSI				12
-#define CLOCK_CSI0				13
-#define CLOCK_BISP				14
-#define CLOCK_CSI1				15
-#define CLOCK_SD3				16
-#define CLOCK_I2C4				17
-#define CLOCK_GPIO				18
-#define CLOCK_DMM				19
-#define CLOCK_I2STX				20
-#define CLOCK_I2SRX				21
-#define CLOCK_HDMIA				22
-#define CLOCK_SPDIF				23
-#define CLOCK_PCM0				24
-#define CLOCK_VDE				25
-#define CLOCK_VCE				26
-#define CLOCK_HDE				27
-#define CLOCK_SHARESRAM				28
-#define CLOCK_CMU_DDR1				29
-#define CLOCK_GPU3D				30
-#define CLOCK_CMUDDR0				31
-#define CLOCK_SPEED				32
-#define CLOCK_I2C5				33
-#define CLOCK_THERMAL				34
-#define CLOCK_HDMI				35
-#define CLOCK_PWM4				36
-#define CLOCK_PWM5				37
-#define CLOCK_UART0				38
-#define CLOCK_UART1				39
-#define CLOCK_UART2				40
-#define CLOCK_IRC				41
-#define CLOCK_SPI0				42
-#define CLOCK_SPI1				43
-#define CLOCK_SPI2				44
-#define CLOCK_SPI3				45
-#define CLOCK_I2C0				46
-#define CLOCK_I2C1				47
-#define CLOCK_PCM1				48
-#define CLOCK_IMX				49
-#define CLOCK_UART6				50
-#define CLOCK_UART3				51
-#define CLOCK_UART4				52
-#define CLOCK_UART5				53
-#define CLOCK_ETHERNET				54
-#define CLOCK_PWM0				55
-#define CLOCK_PWM1				56
-#define CLOCK_PWM2				57
-#define CLOCK_PWM3				58
-#define CLOCK_TIMER				59
-#define CLOCK_SE				60
-#define CLOCK_HDCP2TX				61
-#define CLOCK_I2C2				62
-#define CLOCK_I2C3				63
-
-#endif
diff --git a/include/dt-bindings/reset/actions,s900-reset.h b/include/dt-bindings/reset/actions,s900-reset.h
new file mode 100644
index 0000000..42c19d0
--- /dev/null
+++ b/include/dt-bindings/reset/actions,s900-reset.h
@@ -0,0 +1,65 @@ 
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+//
+// Device Tree binding constants for Actions Semi S900 Reset Management Unit
+//
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_ACTIONS_S900_RESET_H
+#define __DT_BINDINGS_ACTIONS_S900_RESET_H
+
+#define RESET_CHIPID				0
+#define RESET_CPU_SCNT				1
+#define RESET_SRAMI				2
+#define RESET_DDR_CTL_PHY			3
+#define RESET_DMAC				4
+#define RESET_GPIO				5
+#define RESET_BISP_AXI				6
+#define RESET_CSI0				7
+#define RESET_CSI1				8
+#define RESET_DE				9
+#define RESET_DSI				10
+#define RESET_GPU3D_PA				11
+#define RESET_GPU3D_PB				12
+#define RESET_HDE				13
+#define RESET_I2C0				14
+#define RESET_I2C1				15
+#define RESET_I2C2				16
+#define RESET_I2C3				17
+#define RESET_I2C4				18
+#define RESET_I2C5				19
+#define RESET_IMX				20
+#define RESET_NANDC0				21
+#define RESET_NANDC1				22
+#define RESET_SD0				23
+#define RESET_SD1				24
+#define RESET_SD2				25
+#define RESET_SD3				26
+#define RESET_SPI0				27
+#define RESET_SPI1				28
+#define RESET_SPI2				29
+#define RESET_SPI3				30
+#define RESET_UART0				31
+#define RESET_UART1				32
+#define RESET_UART2				33
+#define RESET_UART3				34
+#define RESET_UART4				35
+#define RESET_UART5				36
+#define RESET_UART6				37
+#define RESET_HDMI				38
+#define RESET_LVDS				39
+#define RESET_EDP				40
+#define RESET_USB2HUB				41
+#define RESET_USB2HSIC				42
+#define RESET_USB3				43
+#define RESET_PCM1				44
+#define RESET_AUDIO				45
+#define RESET_PCM0				46
+#define RESET_SE				47
+#define RESET_GIC				48
+#define RESET_DDR_CTL_PHY_AXI			49
+#define RESET_CMU_DDR				50
+#define RESET_DMM				51
+#define RESET_HDCP2TX				52
+#define RESET_ETHERNET				53
+
+#endif /* __DT_BINDINGS_ACTIONS_S900_RESET_H */