diff mbox series

[U-Boot,18/18] bcm963158: add nand support

Message ID 1552659287-11246-19-git-send-email-philippe.reynes@softathome.com
State Accepted
Delegated to: Tom Rini
Headers show
Series Initial support of driver brcmnand (from kernel 4.18) | expand

Commit Message

Philippe REYNES March 15, 2019, 2:14 p.m. UTC
Enable the nand support (driver and command)
in the configuration of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
---
 configs/bcm963158_ram_defconfig      | 6 ++++++
 include/configs/broadcom_bcm963158.h | 7 +++++++
 2 files changed, 13 insertions(+)

Comments

Tom Rini April 24, 2019, 1:27 p.m. UTC | #1
On Fri, Mar 15, 2019 at 03:14:47PM +0100, Philippe Reynes wrote:

> Enable the nand support (driver and command)
> in the configuration of the board bcm963158.
> 
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/configs/bcm963158_ram_defconfig b/configs/bcm963158_ram_defconfig
index fc55e98..248044a 100644
--- a/configs/bcm963158_ram_defconfig
+++ b/configs/bcm963158_ram_defconfig
@@ -20,6 +20,8 @@  CONFIG_CMD_BOOTEFI_SELFTEST=y
 # CONFIG_CMD_LZMADEC is not set
 # CONFIG_CMD_UNZIP is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ISO_PARTITION=y
@@ -29,6 +31,10 @@  CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
 CONFIG_BLK=y
 CONFIG_CLK=y
 # CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_63158=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_CONS_INDEX=0
diff --git a/include/configs/broadcom_bcm963158.h b/include/configs/broadcom_bcm963158.h
index 5834e1e..2de6f21 100644
--- a/include/configs/broadcom_bcm963158.h
+++ b/include/configs/broadcom_bcm963158.h
@@ -30,6 +30,13 @@ 
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#ifdef CONFIG_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
+#endif /* CONFIG_NAND */
+
 /*
  * bcm963158
  */