@@ -2213,12 +2213,6 @@ The following options need to be configured:
the environment like the "source" command or the
boot command first.
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
- Define this in order to add variables describing certain
- run-time determined information about the hardware to the
- environment. These will be named board_name, board_rev.
-
CONFIG_DELAY_ENVIRONMENT
Normally the environment is loaded when the board is
@@ -22,6 +22,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_BOOTP_BOOTPATH=y
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
# CONFIG_NET is not set
CONFIG_DFU_MMC=y
CONFIG_DM_I2C_GPIO=y
@@ -486,4 +486,14 @@ config ENV_SIZE
endif
+config ENV_VARS_UBOOT_RUNTIME_CONFIG
+ bool "Add run-time information to the environment"
+ default y if ARCH_OMAP2PLUS || ARCH_MX6 || ARCH_AT91 || \
+ ARCH_BCM283X || ARCH_KEYSTONE || ARCH_VF610 || \
+ ARCH_EXYNOS || ARCH_MX7
+ help
+ Enable this in order to add variables describing certain
+ run-time determined information about the hardware to the
+ environment. These will be named board_name, board_rev.
+
endmenu
@@ -56,8 +56,6 @@
#define NANDARGS ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=" \
"setenv mmcdev " #instance"; "\
@@ -26,8 +26,6 @@
#define CONFIG_UBI_SILENCE_MSG
#define CONFIG_UBIFS_SILENCE_MSG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
@@ -65,8 +65,6 @@
# define CONFIG_RESET_TO_RETRY
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
@@ -26,8 +26,6 @@
/* Always 128 KiB env size */
#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define MEM_LAYOUT_ENV_SETTINGS \
@@ -62,8 +62,6 @@
/* Always 64 KiB env size */
#define CONFIG_ENV_SIZE (64 << 10)
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
@@ -41,7 +41,6 @@
/* Make the HW version stuff available in U-Boot env */
#define CONFIG_VERSION_VARIABLE /* ver environment variable */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* I2C Configs */
#define CONFIG_SYS_I2C
@@ -69,8 +69,6 @@
#define NANDARGS ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
@@ -56,8 +56,6 @@
#define NANDARGS ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
@@ -99,7 +99,6 @@
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
@@ -45,7 +45,6 @@
/* Environment */
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB env size */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_OFFSET (768 * 1024)
@@ -63,7 +63,6 @@
#define CONFIG_ENV_OFFSET (768 * 1024)
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
@@ -84,7 +84,6 @@
#undef CONFIG_SYS_MONITOR_LEN
#define CONFIG_ENV_SIZE (16 * 1024)
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
@@ -39,7 +39,6 @@
/* Make the HW version stuff available in U-Boot env */
#define CONFIG_VERSION_VARIABLE /* ver environment variable */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* I2C Configs */
#define CONFIG_SYS_I2C
@@ -19,8 +19,6 @@
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
@@ -26,7 +26,6 @@
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
@@ -39,7 +39,6 @@
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -34,6 +34,4 @@
/* ENV related config options */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#endif /* __CONFIG_DUOVERO_H */
@@ -56,7 +56,6 @@
#define CONFIG_BOARD_NAME EL6Q
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"board="__stringify(CONFIG_BOARD_NAME)"\0" \
"cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \
@@ -28,8 +28,6 @@
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
@@ -16,8 +16,6 @@
/* Platform type */
#define CONFIG_SOC_K2G
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
@@ -94,7 +94,6 @@
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 1
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200 quiet\0" \
"fdtfile=imx6q-mccmon6.dtb\0" \
@@ -71,7 +71,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 1
#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdtfile=undefined\0" \
@@ -57,8 +57,6 @@
#define EMMC_ENV ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
@@ -43,7 +43,6 @@
#define UPDATE_M4_ENV ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
UPDATE_M4_ENV \
"script=boot.scr\0" \
@@ -18,8 +18,6 @@
/* SPL options */
#include "imx6_spl.h"
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
@@ -22,8 +22,6 @@
#define PHYS_SDRAM_SIZE SZ_512M
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
@@ -185,7 +185,6 @@
* TODO: Add Odroid X support
*/
#define CONFIG_MISC_COMMON
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_BOARD_TYPES
#define CONFIG_MISC_INIT_R
@@ -88,7 +88,6 @@
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ODROID_REV_AIN 9
#define CONFIG_REVISION_TAG
#define CONFIG_BOARD_TYPES
@@ -30,7 +30,6 @@
/* ENV related config options */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ENV_OVERWRITE
#endif /* __CONFIG_PANDA_H */
@@ -25,7 +25,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_PCM051
/* set to negative value for no autoboot */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80007fc0\0" \
"fdtaddr=0x80000000\0" \
@@ -22,8 +22,6 @@
/* set env size */
#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
@@ -20,7 +20,6 @@
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"bootdir=/boot\0" \
@@ -86,7 +86,6 @@
#define CONFIG_INITRD_TAG
/* Environment */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define ENV_DEVICE_SETTINGS \
"stdin=serial,usbkbd\0" \
"stdout=serial,vidconsole\0" \
@@ -103,7 +103,6 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_UPDATEB \
"updatek=" \
@@ -71,8 +71,6 @@
#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x100000;" \
@@ -15,8 +15,6 @@
#include "at91-sama5_common.h"
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/*
* This needs to be defined for the OHCI code to work but it is defined as
* ATMEL_ID_UHPHS in the CPU specific header files.
@@ -28,7 +28,6 @@
/* commands to include */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"fdtaddr=0x80F80000\0" \
@@ -58,7 +58,6 @@
#include <environment/ti/boot.h>
#include <environment/ti/mmc.h>
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
@@ -57,8 +57,6 @@
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
@@ -52,8 +52,6 @@
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
@@ -46,8 +46,6 @@
/* MMC Configuration */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
@@ -27,7 +27,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/
/* Linux only */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_high=0xffffffff\0" \
@@ -92,7 +92,6 @@
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_OFFSET_REDUND (9 * SZ_64K)
@@ -79,7 +79,6 @@
#define CONFIG_IMX_VIDEO_SKIP
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"splashpos=m,m\0" \
@@ -23,7 +23,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_IMAGE_FORMAT_LEGACY
/* general purpose I/O */
@@ -538,7 +538,6 @@ CONFIG_ENV_TOTAL_SIZE
CONFIG_ENV_UBIFS_OPTION
CONFIG_ENV_UBI_MTD
CONFIG_ENV_UBI_VOLUME_REDUND
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
CONFIG_ENV_VERSION
CONFIG_EP9302
CONFIG_EP9307
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> --- README | 6 ------ configs/colibri_pxa270_defconfig | 1 + configs/s5p_goni_defconfig | 1 + env/Kconfig | 10 ++++++++++ include/configs/am335x_evm.h | 2 -- include/configs/am335x_igep003x.h | 2 -- include/configs/am335x_shc.h | 2 -- include/configs/am335x_sl50.h | 2 -- include/configs/am43xx_evm.h | 2 -- include/configs/apalis_imx6.h | 1 - include/configs/baltos.h | 2 -- include/configs/bav335x.h | 2 -- include/configs/cgtqmx6eval.h | 1 - include/configs/cl-som-am57x.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t43.h | 1 - include/configs/colibri_imx6.h | 1 - include/configs/colibri_imx7.h | 2 -- include/configs/colibri_pxa270.h | 1 - include/configs/colibri_vf.h | 1 - include/configs/duovero.h | 2 -- include/configs/el6x_common.h | 1 - include/configs/imx6_logic.h | 2 -- include/configs/k2g_evm.h | 2 -- include/configs/mccmon6.h | 1 - include/configs/mx6cuboxi.h | 1 - include/configs/mx6sabre_common.h | 2 -- include/configs/mx6sxsabresd.h | 1 - include/configs/mx6ul_14x14_evk.h | 2 -- include/configs/mx6ullevk.h | 2 -- include/configs/odroid.h | 1 - include/configs/odroid_xu3.h | 1 - include/configs/omap4_panda.h | 1 - include/configs/pcm051.h | 1 - include/configs/pengwyn.h | 2 -- include/configs/pepper.h | 1 - include/configs/rpi.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/s5pc210_universal.h | 2 -- include/configs/sama5d3xek.h | 2 -- include/configs/ti814x_evm.h | 1 - include/configs/ti_omap5_common.h | 1 - include/configs/trats.h | 2 -- include/configs/trats2.h | 2 -- include/configs/udoo.h | 2 -- include/configs/udoo_neo.h | 1 - include/configs/vining_2000.h | 1 - include/configs/wandboard.h | 1 - include/configs/wb50n.h | 1 - scripts/config_whitelist.txt | 1 - 50 files changed, 12 insertions(+), 72 deletions(-)