| Message ID | 1475690458-26319-1-git-send-email-fabio.estevam@nxp.com |
|---|---|
| State | Accepted |
| Commit | 5b0d03b306b8d3010835d8b191bfc0581735021f |
| Headers | show |
On 05/10/2016 20:00, Fabio Estevam wrote: > Add a README file to explain how to build and flash the SD card > for Udoo boards. > > Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> > --- > board/udoo/README | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 board/udoo/README > > diff --git a/board/udoo/README b/board/udoo/README > new file mode 100644 > index 0000000..6fbcc59 > --- /dev/null > +++ b/board/udoo/README > @@ -0,0 +1,21 @@ > +How to use U-Boot on MX6Q/DL Udoo boards > +---------------------------------------- > + > +- Build U-Boot for MX6Q/DL Udoo boards: > + > +$ make mrproper > +$ make udoo_defconfig > +$ make > + > +This will generate the SPL image called SPL and the u-boot.img. > + > +- Flash the SPL image into the SD card: > + > +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync > + > +- Flash the u-boot.img image into the SD card: > + > +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync > + > +- Insert the SD card in the board, power it up and U-Boot messages should > +come up. > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic
diff --git a/board/udoo/README b/board/udoo/README new file mode 100644 index 0000000..6fbcc59 --- /dev/null +++ b/board/udoo/README @@ -0,0 +1,21 @@ +How to use U-Boot on MX6Q/DL Udoo boards +---------------------------------------- + +- Build U-Boot for MX6Q/DL Udoo boards: + +$ make mrproper +$ make udoo_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the SD card: + +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Insert the SD card in the board, power it up and U-Boot messages should +come up.
Add a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> --- board/udoo/README | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 board/udoo/README