diff mbox

[U-Boot,1/3] warp7: Add a secure mode target

Message ID 1472158665-14240-1-git-send-email-festevam@gmail.com
State Accepted
Commit 375d19c9114c1aca722f22fca937aec70e6feecf
Delegated to: Stefano Babic
Headers show

Commit Message

Fabio Estevam Aug. 25, 2016, 8:57 p.m. UTC 
From: Fabio Estevam <fabio.estevam@nxp.com>

NXP kernel expects to boot in secure mode, so introduce 
warp7_secure_defconfig target which selects CONFIG_ARMV7_BOOT_SEC_DEFAULT.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 configs/warp7_secure_defconfig | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 configs/warp7_secure_defconfig

Comments

Otavio Salvador Aug. 25, 2016, 9:02 p.m. UTC | #1 
On Thu, Aug 25, 2016 at 5:57 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> NXP kernel expects to boot in secure mode, so introduce
> warp7_secure_defconfig target which selects CONFIG_ARMV7_BOOT_SEC_DEFAULT.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

Breno has sent the patch to include this on the main config; being the
official kernel using this enabled I think it makes sense to keep his
patch.
Fabio Estevam Aug. 25, 2016, 10:11 p.m. UTC | #2 
Hi Otavio,

On Thu, Aug 25, 2016 at 6:02 PM, Otavio Salvador
<otavio.salvador@ossystems.com.br> wrote:

> Breno has sent the patch to include this on the main config; being the

Breno's patch has not been submitted to the list. It has only being
applied into u-boot-fslc.

> official kernel using this enabled I think it makes sense to keep his
> patch.

There is no such thing as 'official kernel', sorry. User can choose
whether booting mainline or NXP kernel. This patch series allows both
kernel options to boot out of the box.

It is the same thing we did on mx7dsabresd, by the way.
diff mbox

Patch

diff --git a/configs/warp7_secure_defconfig b/configs/warp7_secure_defconfig
new file mode 100644
index 0000000..34fcdea
--- /dev/null
+++ b/configs/warp7_secure_defconfig
@@ -0,0 +1,36 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_TARGET_WARP7=y
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="FSL"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_OF_LIBFDT=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y