diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 09db849..84fa3eb 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -133,6 +133,12 @@ config TARGET_MX6UL_14X14_EVK
 	select DM_THERMAL
 	select SUPPORT_SPL
 
+config TARGET_MX6ULL_14X14_EVK
+	bool "Support mx6ull_14x14_evk"
+	select MX6ULL
+	select DM
+	select DM_THERMAL
+
 config TARGET_NITROGEN6X
 	bool "nitrogen6x"
 
@@ -221,6 +227,7 @@ source "board/freescale/mx6slevk/Kconfig"
 source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/mx6sxsabreauto/Kconfig"
 source "board/freescale/mx6ul_14x14_evk/Kconfig"
+source "board/freescale/mx6ullevk/Kconfig"
 source "board/phytec/pcm058/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/kosagi/novena/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d93fabc..91a533f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -265,6 +265,8 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
 	vf610-twr.dtb \
 	pcm052.dtb
 
+dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb
+
 dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
 	k2l-evm.dtb \
 	k2e-evm.dtb \
diff --git a/arch/arm/dts/imx6ull-14x14-evk.dts b/arch/arm/dts/imx6ull-14x14-evk.dts
new file mode 100644
index 0000000..375bd4e
--- /dev/null
+++ b/arch/arm/dts/imx6ull-14x14-evk.dts
@@ -0,0 +1,527 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "Freescale i.MX6 ULL 14x14 EVK Board";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_sd1_vmmc: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_gpio_dvfs: regulator-gpio {
+			compatible = "regulator-gpio";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_dvfs>;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-name = "gpio_dvfs";
+			regulator-type = "voltage";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			states = <1300000 0x1 1400000 0x0>;
+		};
+	};
+
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			oe-gpios = <&gpio5 8 0>;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			registers-default = /bits/ 8 <0x57>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&reg_arm>;
+	soc-supply = <&reg_soc>;
+	dc-supply = <&reg_gpio_dvfs>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&gpc {
+	fsl,cpu_pupscr_sw2iso = <0x1>;
+	fsl,cpu_pupscr_sw = <0x0>;
+	fsl,cpu_pdnscr_iso2sw = <0x1>;
+	fsl,cpu_pdnscr_iso = <0x1>;
+	fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	mag3110@0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		position = <2>;
+	};
+
+	fxls8471@1e {
+		compatible = "fsl,fxls8471";
+		reg = <0x1e>;
+		position = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 8>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+	imx6ul-evk {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
+				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
+				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+			>;
+		};
+
+		pinctrl_csi1: csi1grp {
+			fsl,pins = <
+				MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+				MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+				MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+				MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+				MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+				MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+				MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+				MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+				MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+				MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+				MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+				MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp{
+			fsl,pins = <
+				MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+				MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp{
+			fsl,pins = <
+				MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+				MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_lcdif_dat: lcdifdatgrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+				MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+				MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+				MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+				MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+				MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+				MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+				MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+				MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+				MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+				MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+				MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+				MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+				MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+				MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+				MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+				MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+				MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+				MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+				MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+				MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+				MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+				MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+				MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+			>;
+		};
+
+		pinctrl_lcdif_ctrl: lcdifctrlgrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+				MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+				MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+				MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+			>;
+		};
+
+		pinctrl_qspi: qspigrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
+				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
+				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
+				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
+				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+				MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+				MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+				MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2dte: uart2dtegrp {
+			fsl,pins = <
+				MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
+				MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
+				MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS	0x1b0b1
+				MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10071
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+			>;
+		};
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default_snvs";
+        pinctrl-0 = <&pinctrl_hog_2>;
+        imx6ul-evk {
+		pinctrl_hog_2: hoggrp-2 {
+                        fsl,pins = <
+                                MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x80000000
+                        >;
+                };
+
+		pinctrl_dvfs: dvfsgrp {
+                        fsl,pins = <
+                                MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x79
+                        >;
+                };
+
+		pinctrl_lcdif_reset: lcdifresetgrp {
+                        fsl,pins = <
+                                /* used for lcd reset */
+                                MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+                        >;
+                };
+
+		pinctrl_spi4: spi4grp {
+                        fsl,pins = <
+                                MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10        0x70a1
+                                MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11        0x70a1
+                                MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07      0x70a1
+                                MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08      0x80000000
+                        >;
+                };
+
+                pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
+                        fsl,pins = <
+                                MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04   0x17059
+                        >;
+                };
+        };
+};
+
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl
+		     &pinctrl_lcdif_reset>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-nor,ddr-quad-read-dummy = <6>;
+		reg = <0>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart2dte>; */
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,wdog_b;
+};
diff --git a/board/freescale/mx6ullevk/Kconfig b/board/freescale/mx6ullevk/Kconfig
new file mode 100644
index 0000000..7eec497
--- /dev/null
+++ b/board/freescale/mx6ullevk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX6ULL_14X14_EVK
+
+config SYS_BOARD
+	default "mx6ullevk"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "mx6ullevk"
+
+endif
diff --git a/board/freescale/mx6ullevk/MAINTAINERS b/board/freescale/mx6ullevk/MAINTAINERS
new file mode 100644
index 0000000..4137674
--- /dev/null
+++ b/board/freescale/mx6ullevk/MAINTAINERS
@@ -0,0 +1,6 @@
+MX6ULLEVK BOARD
+M:	Peng Fan <peng.fan@nxp.com>
+S:	Maintained
+F:	board/freescale/mx6ullevk/
+F:	include/configs/mx6ullevk.h
+F:	configs/mx6ull_14x14_evk_defconfig
diff --git a/board/freescale/mx6ullevk/Makefile b/board/freescale/mx6ullevk/Makefile
new file mode 100644
index 0000000..c64fba4
--- /dev/null
+++ b/board/freescale/mx6ullevk/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := mx6ullevk.o
diff --git a/board/freescale/mx6ullevk/imximage.cfg b/board/freescale/mx6ullevk/imximage.cfg
new file mode 100644
index 0000000..4604b62
--- /dev/null
+++ b/board/freescale/mx6ullevk/imximage.cfg
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+#ifdef CONFIG_SYS_BOOT_QSPI
+BOOT_FROM	qspi
+#elif defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM	nor
+#else
+BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6ullevk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x000C0000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x000C0030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000030
+DATA 4 0x020E0264 0x00000030
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00000030
+DATA 4 0x020E0284 0x00000030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B080C 0x00000004
+DATA 4 0x021B083C 0x41640158
+DATA 4 0x021B0848 0x40403237
+DATA 4 0x021B0850 0x40403C33
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B08C0 0x00944009
+DATA 4 0x021B08b8 0x00000800
+DATA 4 0x021B0004 0x0002002D
+DATA 4 0x021B0008 0x1B333030
+DATA 4 0x021B000C 0x676B52F3
+DATA 4 0x021B0010 0xB66D0B63
+DATA 4 0x021B0014 0x01FF00DB
+DATA 4 0x021B0018 0x00201740
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x000026D2
+DATA 4 0x021B0030 0x006B1023
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x84180000
+DATA 4 0x021B0890 0x00400000
+DATA 4 0x021B001C 0x02008032
+DATA 4 0x021B001C 0x00008033
+DATA 4 0x021B001C 0x00048031
+DATA 4 0x021B001C 0x15208030
+DATA 4 0x021B001C 0x04008040
+DATA 4 0x021B0020 0x00000800
+DATA 4 0x021B0818 0x00000227
+DATA 4 0x021B0004 0x0002552D
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+
+#endif
diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c
new file mode 100644
index 0000000..489bf21
--- /dev/null
+++ b/board/freescale/mx6ullevk/mx6ullevk.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int mmc_map_to_kernel_blk(int devno)
+{
+	return devno;
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)},
+	{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	setenv("board_name", "EVK");
+	setenv("board_rev", "14X14");
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: MX6ULL 14x14 EVK\n");
+
+	return 0;
+}
diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig
new file mode 100644
index 0000000..a106b5d
--- /dev/null
+++ b/configs/mx6ull_14x14_evk_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6ULL_14X14_EVK=y
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ullevk/imximage.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_74X164=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_SPI=y
diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
new file mode 100644
index 0000000..ccce954
--- /dev/null
+++ b/include/configs/mx6ullevk.h
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef __MX6ULLEVK_CONFIG_H
+#define __MX6ULLEVK_CONFIG_H
+
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+#include <asm/imx-common/gpio.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#ifndef CONFIG_CSF_SIZE
+#define CONFIG_CSF_SIZE 0x4000
+#endif
+#endif
+
+#define PHYS_SDRAM_SIZE	SZ_512M
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/* MMC Configs */
+#ifdef CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+
+/* NAND pin conflicts with usdhc2 */
+#ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+#else
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#endif
+#endif
+
+/* I2C configs */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttymxc0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=imx6ull-14x14-evk.dtb\0" \
+	"fdt_addr=0x83000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev};" \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_MMC_ENV_DEV		1	/* USDHC2 */
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
+
+#define CONFIG_CMD_BMODE
+
+#define CONFIG_IMX_THERMAL
+
+#define CONFIG_IOMUX_LPSR
+
+#define CONFIG_SOFT_SPI
+
+#endif
