diff mbox

[U-Boot] warp7: Fix DFU support

Message ID 1465494870-8096-1-git-send-email-fabio.estevam@nxp.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Fabio Estevam June 9, 2016, 5:54 p.m. UTC 
Currently DFU is not working.

Adjust CONFIG_SYS_MALLOC_LEN and dfu_alt_info so that we are
able to flash u-boot.imx into the eMMC via dfu using the
following method:

=> dfu 0 mmc 0

In the host PC:

dfu-util -D u-boot.imx -a boot

This is the same approach done in the mx6sl warp board. 

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 include/configs/warp7.h | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

Comments

Stefano Babic June 18, 2016, 8:37 a.m. UTC | #1 
On 09/06/2016 19:54, Fabio Estevam wrote:
> Currently DFU is not working.
> 
> Adjust CONFIG_SYS_MALLOC_LEN and dfu_alt_info so that we are
> able to flash u-boot.imx into the eMMC via dfu using the
> following method:
> 
> => dfu 0 mmc 0
> 
> In the host PC:
> 
> dfu-util -D u-boot.imx -a boot
> 
> This is the same approach done in the mx6sl warp board. 
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  include/configs/warp7.h | 7 ++-----

Applied to master (bug fix), thanks !

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 4dfcd28..b57065b 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -17,7 +17,7 @@ 
 #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
+#define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
@@ -28,10 +28,7 @@ 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 #define CONFIG_DFU_ENV_SETTINGS \
-	"dfu_alt_info=image raw 0 0x800000;"\
-		"u-boot raw 0 0x4000;"\
-		"bootimg part 0 1;"\
-		"rootfs part 0 2\0" \
+	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_DFU_ENV_SETTINGS \