diff mbox

[U-Boot,4/4] ARM: DRA7: configs: Remove obsolete configs

Message ID 1462540023-19509-5-git-send-email-lokeshvutla@ti.com
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Lokesh Vutla May 6, 2016, 1:07 p.m. UTC 
Removing:
uart3_defconfig:
Now uart3 can be selected using menuconfig, removing separate
config for uart mode. Doing uart boot is not straight forward as ROM uses
uart3 as default serial console. In order to boot to prompt, concole in both
u-boot and kernel needs to be changed.

qspiboot_defconfig:
The only advantage of enabling QSPI_BOOT is selecting env in QSPI.
Eventually env needs to be selected by menuconfig so removing
qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/dra7xx/MAINTAINERS           |  2 --
 configs/dra7xx_evm_qspiboot_defconfig | 43 ----------------------------------
 configs/dra7xx_evm_uart3_defconfig    | 44 -----------------------------------
 3 files changed, 89 deletions(-)
 delete mode 100644 configs/dra7xx_evm_qspiboot_defconfig
 delete mode 100644 configs/dra7xx_evm_uart3_defconfig

Comments

Tom Rini May 6, 2016, 5:49 p.m. UTC | #1 
On Fri, May 06, 2016 at 06:37:03PM +0530, Lokesh Vutla wrote:

> Removing:
> uart3_defconfig:
> Now uart3 can be selected using menuconfig, removing separate
> config for uart mode. Doing uart boot is not straight forward as ROM uses
> uart3 as default serial console. In order to boot to prompt, concole in both
> u-boot and kernel needs to be changed.
> 
> qspiboot_defconfig:
> The only advantage of enabling QSPI_BOOT is selecting env in QSPI.
> Eventually env needs to be selected by menuconfig so removing
> qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
diff mbox

Patch

diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS
index d6efe26..edfbdb7 100644
--- a/board/ti/dra7xx/MAINTAINERS
+++ b/board/ti/dra7xx/MAINTAINERS
@@ -5,5 +5,3 @@  F:	board/ti/dra7xx/
 F:	include/configs/dra7xx_evm.h
 F:	configs/dra7xx_evm_defconfig
 F:	configs/dra7xx_evm_nodt_defconfig
-F:	configs/dra7xx_evm_qspiboot_defconfig
-F:	configs/dra7xx_evm_uart3_defconfig
diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig
deleted file mode 100644
index 8ebfe49..0000000
--- a/configs/dra7xx_evm_qspiboot_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_DRA7XX_EVM=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SYS_NS16550=y
-CONFIG_TI_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_OF_LIBFDT=y
diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig
deleted file mode 100644
index 54c7ba9..0000000
--- a/configs/dra7xx_evm_uart3_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_DRA7XX_EVM=y
-CONFIG_CONS_INDEX=3
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SYS_NS16550=y
-CONFIG_TI_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_OF_LIBFDT=y