@@ -47,6 +47,9 @@ source "arch/x86/cpu/queensbay/Kconfig"
# architecture-specific options below
+config AHCI
+ default y
+
config SYS_MALLOC_F_LEN
default 0x800
@@ -261,7 +261,7 @@ static const struct udevice_id broadwell_ahci_ids[] = {
U_BOOT_DRIVER(ahci_broadwell_drv) = {
.name = "ahci_broadwell",
- .id = UCLASS_DISK,
+ .id = UCLASS_AHCI,
.of_match = broadwell_ahci_ids,
.ofdata_to_platdata = broadwell_sata_ofdata_to_platdata,
.probe = broadwell_sata_probe,
@@ -58,7 +58,7 @@ int cpu_common_init(void)
return -ENODEV;
/* Cause the SATA device to do its early init */
- uclass_first_device(UCLASS_DISK, &dev);
+ uclass_first_device(UCLASS_AHCI, &dev);
return 0;
}
@@ -162,7 +162,7 @@ static int bd82x6x_probe(struct udevice *dev)
return 0;
/* Cause the SATA device to do its init */
- uclass_first_device(UCLASS_DISK, &dev);
+ uclass_first_device(UCLASS_AHCI, &dev);
ret = syscon_get_by_driver_data(X86_SYSCON_GMA, &gma_dev);
if (ret)
@@ -233,7 +233,7 @@ static const struct udevice_id bd82x6x_ahci_ids[] = {
U_BOOT_DRIVER(ahci_ivybridge_drv) = {
.name = "ahci_ivybridge",
- .id = UCLASS_DISK,
+ .id = UCLASS_AHCI,
.of_match = bd82x6x_ahci_ids,
.probe = bd82x6x_sata_probe,
};
@@ -9,10 +9,9 @@ config BLK
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
-config DISK
- bool "Support disk controllers with driver model"
+config AHCI
+ bool "Support SATA controllers with driver model"
depends on DM
- default y if DM
help
This enables a uclass for disk controllers in U-Boot. Various driver
types can use this, such as AHCI/SATA. It does not provide any standard
@@ -7,7 +7,7 @@
obj-$(CONFIG_BLK) += blk-uclass.o
-obj-$(CONFIG_DISK) += disk-uclass.o
+obj-$(CONFIG_AHCI) += ahci-uclass.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o
similarity index 72%
rename from drivers/block/disk-uclass.c
rename to drivers/block/ahci-uclass.c
@@ -8,7 +8,7 @@
#include <common.h>
#include <dm.h>
-UCLASS_DRIVER(disk) = {
- .id = UCLASS_DISK,
- .name = "disk",
+UCLASS_DRIVER(ahci) = {
+ .id = UCLASS_AHCI,
+ .name = "ahci",
};
@@ -26,11 +26,11 @@ enum uclass_id {
/* U-Boot uclasses start here - in alphabetical order */
UCLASS_ADC, /* Analog-to-digital converter */
+ UCLASS_AHCI, /* SATA disk controller */
UCLASS_BLK, /* Block device */
UCLASS_CLK, /* Clock source, e.g. used by peripherals */
UCLASS_CPU, /* CPU, typically part of an SoC */
UCLASS_CROS_EC, /* Chrome OS EC */
- UCLASS_DISK, /* Disk controller, e.g. SATA */
UCLASS_DISPLAY, /* Display (e.g. DisplayPort, HDMI) */
UCLASS_DMA, /* Direct Memory Access */
UCLASS_RAM, /* RAM controller */
This started as 'ahci' and was renamed to 'disk' during code review. But it seems that this is too generic. Now that we have a 'blk' uclass, we can use that as the generic piece, and revert to ahci for this. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v2: None arch/x86/Kconfig | 3 +++ arch/x86/cpu/broadwell/sata.c | 2 +- arch/x86/cpu/intel_common/cpu.c | 2 +- arch/x86/cpu/ivybridge/bd82x6x.c | 2 +- arch/x86/cpu/ivybridge/sata.c | 2 +- drivers/block/Kconfig | 5 ++--- drivers/block/Makefile | 2 +- drivers/block/{disk-uclass.c => ahci-uclass.c} | 6 +++--- include/dm/uclass-id.h | 2 +- 9 files changed, 14 insertions(+), 12 deletions(-) rename drivers/block/{disk-uclass.c => ahci-uclass.c} (72%)