| Message ID | 1449645339-18525-1-git-send-email-wenyou.yang@atmel.com |
|---|---|
| State | Rejected, archived |
| Delegated to: | Andreas Bießmann |
| Headers | show |
Hello Wenyou, Am 09.12.2015 um 08:15 schrieb Wenyou Yang: > Build SPL with taurus_defconfig defconfig file. > It build fails with following log message: > > ---8< ---- > $ make mrproper > $ make taurus_defconfig > $ make SPL > [...] > LD spl/lib/built-in.o > LDS spl/u-boot-spl.lds > LD spl/u-boot-spl > arm-none-linux-gnueabi-ld: SPL image too big > make[1]: *** [spl/u-boot-spl] Error 1 > make: *** [spl/u-boot-spl] Error 2 > --->8---- > > This board code is not ready for SPL for now, so disable > CONFIG_SPL. > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > --- > > configs/taurus_defconfig | 1 - > 1 file changed, 1 deletion(-) NACK. With which toolchain? Here current build of u-boot on travis-ci.org: with eldk-5.4: https://travis-ci.org/u-boot/u-boot/jobs/95590341 https://travis-ci.org/u-boot/u-boot/jobs/95590311 bye, Heiko > > diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig > index d59912c..557b066 100644 > --- a/configs/taurus_defconfig > +++ b/configs/taurus_defconfig > @@ -1,7 +1,6 @@ > CONFIG_ARM=y > CONFIG_ARCH_AT91=y > CONFIG_TARGET_TAURUS=y > -CONFIG_SPL=y > CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" > CONFIG_SYS_PROMPT="U-Boot> " > # CONFIG_CMD_BDI is not set >
Hello Heiko, > -----Original Message----- > From: Heiko Schocher [mailto:hs@denx.de] > Sent: 2015年12月9日 15:39 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de>; andreas.devel@googlemail.com; > Meier, Roger <r.meier@siemens.com> > Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL > > Hello Wenyou, > > Am 09.12.2015 um 08:15 schrieb Wenyou Yang: > > Build SPL with taurus_defconfig defconfig file. > > It build fails with following log message: > > > > ---8< ---- > > $ make mrproper > > $ make taurus_defconfig > > $ make SPL > > [...] > > LD spl/lib/built-in.o > > LDS spl/u-boot-spl.lds > > LD spl/u-boot-spl > > arm-none-linux-gnueabi-ld: SPL image too big > > make[1]: *** [spl/u-boot-spl] Error 1 > > make: *** [spl/u-boot-spl] Error 2 > > --->8---- > > > > This board code is not ready for SPL for now, so disable CONFIG_SPL. > > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > > --- > > > > configs/taurus_defconfig | 1 - > > 1 file changed, 1 deletion(-) > > NACK. > > With which toolchain? The toolchain is Sourcery CodeBench Lite 2013.05-24. Here is the toolchain information, ---8<----- $ arm-none-linux-gnueabi-gcc -v Using built-in specs. COLLECT_GCC=arm-none-linux-gnueabi-gcc COLLECT_LTO_WRAPPER=/home/wyang/opt/arm-2013.05/bin/../libexec/gcc/arm-none-linux-gnueabi/4.7.3/lto-wrapper Target: arm-none-linux-gnueabi Configured with: /scratch/jbrown/2013.05-arm-linux-release/src/gcc-4.7-2013.05/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-arch=armv5te --with-gnu-as --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm} %{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:-funwind-tables} -D__CS_SOURCERYGXX_MAJ__=2013 -D__CS_SOURCERYGXX_MIN__=5 -D__CS_SOURCERYGXX_REV__=24 %{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared --enable-lto --enable-symvers=gnu --enable-__cxa_atexit --with-pkgversion='Sourcery CodeBench Lite 2013.05-24' --with-bugurl=https://sourcery.mentor.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --with-build-sysroot=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-gnueabi/libc --with-gmp=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-mpfr=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-mpc=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-ppl=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-libelf=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --disable-libgomp --disable-libitm --enable-poison-system-directories --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-gnueabi/bin --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-gnueabi/bin Thread model: posix gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) --->8--------- > > Here current build of u-boot on travis-ci.org: > with eldk-5.4: > https://travis-ci.org/u-boot/u-boot/jobs/95590341 > https://travis-ci.org/u-boot/u-boot/jobs/95590311 > > bye, > Heiko > > > > diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index > > d59912c..557b066 100644 > > --- a/configs/taurus_defconfig > > +++ b/configs/taurus_defconfig > > @@ -1,7 +1,6 @@ > > CONFIG_ARM=y > > CONFIG_ARCH_AT91=y > > CONFIG_TARGET_TAURUS=y > > -CONFIG_SPL=y > > > CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_ > TAURUS" > > CONFIG_SYS_PROMPT="U-Boot> " > > # CONFIG_CMD_BDI is not set > > > > -- > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Best Regards, Wenyou Yang
Hello Wenyou, Am 09.12.2015 um 08:43 schrieb Yang, Wenyou: > Hello Heiko, > >> -----Original Message----- >> From: Heiko Schocher [mailto:hs@denx.de] >> Sent: 2015年12月9日 15:39 >> To: Yang, Wenyou <Wenyou.Yang@atmel.com> >> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; andreas.devel@googlemail.com; >> Meier, Roger <r.meier@siemens.com> >> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL >> >> Hello Wenyou, >> >> Am 09.12.2015 um 08:15 schrieb Wenyou Yang: >>> Build SPL with taurus_defconfig defconfig file. >>> It build fails with following log message: >>> >>> ---8< ---- >>> $ make mrproper >>> $ make taurus_defconfig >>> $ make SPL >>> [...] >>> LD spl/lib/built-in.o >>> LDS spl/u-boot-spl.lds >>> LD spl/u-boot-spl >>> arm-none-linux-gnueabi-ld: SPL image too big >>> make[1]: *** [spl/u-boot-spl] Error 1 >>> make: *** [spl/u-boot-spl] Error 2 >>> --->8---- >>> >>> This board code is not ready for SPL for now, so disable CONFIG_SPL. >>> >>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> >>> --- >>> >>> configs/taurus_defconfig | 1 - >>> 1 file changed, 1 deletion(-) >> >> NACK. >> >> With which toolchain? > > The toolchain is Sourcery CodeBench Lite 2013.05-24. Here is the toolchain information, > > ---8<----- > $ arm-none-linux-gnueabi-gcc -v > Using built-in specs. > COLLECT_GCC=arm-none-linux-gnueabi-gcc > COLLECT_LTO_WRAPPER=/home/wyang/opt/arm-2013.05/bin/../libexec/gcc/arm-none-linux-gnueabi/4.7.3/lto-wrapper > Target: arm-none-linux-gnueabi > Configured with: /scratch/jbrown/2013.05-arm-linux-release/src/gcc-4.7-2013.05/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-arch=armv5te --with-gnu-as --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm} %{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:-funwind-tables} -D__CS_SOURCERYGXX_MAJ__=2013 -D__CS_SOURCERYGXX_MIN__=5 -D__CS_SOURCERYGXX_REV__=24 %{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared --enable-lto --enable-symvers=gnu --enable-__cxa_atexit --with-pkgversion='Sourcery CodeBench Lite 2013.05-24' --with-bugurl=https://sourcery.mentor.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --w i th-build-sysroot=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-gnueabi/libc --with-gmp=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-mpfr=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-mpc=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-ppl=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extr a s/host-libs-i686-pc-linux-gnu/usr --with-libelf=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --disable-libgomp --disable-libitm --enable-poison-system-directories --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-gnueabi/bin --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-gnueabi/bin > Thread model: posix > gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) > --->8--------- Just tried with hs@localhost:u-boot [master] $ arm-unknown-linux-gnueabi-gcc -v Using built-in specs. COLLECT_GCC=arm-unknown-linux-gnueabi-gcc COLLECT_LTO_WRAPPER=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/libexec/gcc/arm-unknown-linux-gnueabi/5.2.1/lto-wrapper Target: arm-unknown-linux-gnueabi Configured with: /home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/src/gcc-custom/configure --build=x86_64-build_unknown-linux-gnu --host=x86_64-build_unknown-linux-gnu --target=arm-unknown-linux-gnueabi --prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi --with-sysroot=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot --enable-languages=c --with-pkgversion='crosstool-NG 1.21.0' --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --disable-libsanitizer --with-gmp=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-unknown-linux-gnueabi/buildtools --with-mpfr=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-unknown-linux-gnueabi/buildtools --with-mpc=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-unknown-linux-gnueabi/buildtools --with-ppl=no --with-isl=no --with-cloog=no --with-libelf=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-unknown-linux-gnueabi/buildtools --enable-threads=posix --enable-target-optspace --disable-nls --disable-multilib --with-local-prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot --enable-c99 --enable-long-long Thread model: posix gcc version 5.2.1 20151110 (crosstool-NG 1.21.0) hs@localhost:u-boot [master] $ hs@localhost:u-boot [master] $ make taurus_defconfig HOSTCC scripts/basic/fixdep make all HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf # # configuration written to .config # hs@localhost:u-boot [master] $ make all scripts/kconfig/conf --silentoldconfig Kconfig [...] LD spl/u-boot-spl OBJCOPY spl/u-boot-spl.bin CFG spl/u-boot-spl.cfg MKIMAGE boot.bin MKIMAGE u-boot.img hs@localhost:u-boot [master] $ hs@localhost:u-boot [master] $ ls -al spl/u-boot-spl.bin -rwxrwxr-x. 1 hs hs 15824 9. Dez 08:56 spl/u-boot-spl.bin hs@localhost:u-boot [master] $ Use another toolchain? How big is your spl/u-boot-spl.bin ? bye, Heiko > >> >> Here current build of u-boot on travis-ci.org: >> with eldk-5.4: >> https://travis-ci.org/u-boot/u-boot/jobs/95590341 >> https://travis-ci.org/u-boot/u-boot/jobs/95590311 >> >> bye, >> Heiko >>> >>> diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index >>> d59912c..557b066 100644 >>> --- a/configs/taurus_defconfig >>> +++ b/configs/taurus_defconfig >>> @@ -1,7 +1,6 @@ >>> CONFIG_ARM=y >>> CONFIG_ARCH_AT91=y >>> CONFIG_TARGET_TAURUS=y >>> -CONFIG_SPL=y >>> >> CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_ >> TAURUS" >>> CONFIG_SYS_PROMPT="U-Boot> " >>> # CONFIG_CMD_BDI is not set >>> >> >> -- >> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk >> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > > Best Regards, > Wenyou Yang >
Hi > -----Original Message----- > From: Heiko Schocher [mailto:hs@denx.de] > Sent: 2015年12月9日 16:00 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de>; andreas.devel@googlemail.com; > Meier, Roger <r.meier@siemens.com> > Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL > > Hello Wenyou, > > Am 09.12.2015 um 08:43 schrieb Yang, Wenyou: > > Hello Heiko, > > > >> -----Original Message----- > >> From: Heiko Schocher [mailto:hs@denx.de] > >> Sent: 2015年12月9日 15:39 > >> To: Yang, Wenyou <Wenyou.Yang@atmel.com> > >> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; > >> andreas.devel@googlemail.com; Meier, Roger <r.meier@siemens.com> > >> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL > >> > >> Hello Wenyou, > >> > >> Am 09.12.2015 um 08:15 schrieb Wenyou Yang: > >>> Build SPL with taurus_defconfig defconfig file. > >>> It build fails with following log message: > >>> > >>> ---8< ---- > >>> $ make mrproper > >>> $ make taurus_defconfig > >>> $ make SPL > >>> [...] > >>> LD spl/lib/built-in.o > >>> LDS spl/u-boot-spl.lds > >>> LD spl/u-boot-spl > >>> arm-none-linux-gnueabi-ld: SPL image too big > >>> make[1]: *** [spl/u-boot-spl] Error 1 > >>> make: *** [spl/u-boot-spl] Error 2 > >>> --->8---- > >>> > >>> This board code is not ready for SPL for now, so disable CONFIG_SPL. > >>> > >>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > >>> --- > >>> > >>> configs/taurus_defconfig | 1 - > >>> 1 file changed, 1 deletion(-) > >> > >> NACK. > >> > >> With which toolchain? > > > > The toolchain is Sourcery CodeBench Lite 2013.05-24. Here is the > > toolchain information, > > > > ---8<----- > > $ arm-none-linux-gnueabi-gcc -v > > Using built-in specs. > > COLLECT_GCC=arm-none-linux-gnueabi-gcc > > COLLECT_LTO_WRAPPER=/home/wyang/opt/arm- > 2013.05/bin/../libexec/gcc/arm > > -none-linux-gnueabi/4.7.3/lto-wrapper > > Target: arm-none-linux-gnueabi > > Configured with: > > /scratch/jbrown/2013.05-arm-linux-release/src/gcc-4.7-2013.05/configur > > e --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu > > --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap > > --disable-libssp --disable-libstdcxx-pch > > --enable-extra-sgxxlite-multilibs --with-arch=armv5te --with-gnu-as > > --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm} > > %{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:-fu > > nwind-tables} -D__CS_SOURCERYGXX_MAJ__=2013 - > D__CS_SOURCERYGXX_MIN__=5 > > -D__CS_SOURCERYGXX_REV__=24 %{O2:%{!fno-remove-local-statics: > > -fremove-local-statics}} > > %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: > > -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared > > --enable-lto --enable-symvers=gnu --enable-__cxa_atexit > > --with-pkgversion='Sourcery CodeBench Lite 2013.05-24' > > --with-bugurl=https://sourcery.mentor.com/GNUToolchain/ --disable-nls > > --prefix=/opt/codesourcery > > --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --w > i > th-build-sysroot=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux- > gnueabi/libc --with-gmp=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg- > 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux- > gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with- > mpfr=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none- > linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc- > linux-gnu/usr --with-mpc=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg- > 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux- > gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-ppl=/scratch/jbrown/2013.05- > arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24- > arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-host- > libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with- > cloog=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none- > linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extr > a > s/host-libs-i686-pc-linux-gnu/usr --with-libelf=/scratch/jbrown/2013.05-arm-linux- > release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none- > linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --disable-libgomp --disable- > libitm --enable-poison-system-directories --with-build-time- > tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux- > gnueabi/bin --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux- > release/install/arm-none-linux-gnueabi/bin > > Thread model: posix > > gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) > > --->8--------- > > Just tried with > > hs@localhost:u-boot [master] $ arm-unknown-linux-gnueabi-gcc -v Using built-in > specs. > COLLECT_GCC=arm-unknown-linux-gnueabi-gcc > COLLECT_LTO_WRAPPER=/home/hs/data/Entwicklung/zug/cacheperformance/c > rosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/libexec/gcc/arm- > unknown-linux-gnueabi/5.2.1/lto-wrapper > Target: arm-unknown-linux-gnueabi > Configured with: > /home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/src/gcc- > custom/configure > --build=x86_64-build_unknown-linux-gnu --host=x86_64-build_unknown-linux-gnu > --target=arm-unknown-linux-gnueabi > --prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro- > 5.2-20151110/arm-unknown-linux-gnueabi > --with-sysroot=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools- > linaro-5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux- > gnueabi/sysroot > --enable-languages=c --with-pkgversion='crosstool-NG 1.21.0' --enable- > __cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable- > libquadmath --disable-libquadmath-support --disable-libsanitizer --with- > gmp=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- > unknown-linux-gnueabi/buildtools > --with- > mpfr=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- > unknown-linux-gnueabi/buildtools > --with- > mpc=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- > unknown-linux-gnueabi/buildtools > --with-ppl=no --with-isl=no --with-cloog=no --with- > libelf=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- > unknown-linux-gnueabi/buildtools > --enable-threads=posix --enable-target-optspace --disable-nls --disable-multilib -- > with-local- > prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro- > 5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot > --enable-c99 --enable-long-long > Thread model: posix > gcc version 5.2.1 20151110 (crosstool-NG 1.21.0) hs@localhost:u-boot [master] > $ > > hs@localhost:u-boot [master] $ make taurus_defconfig > HOSTCC scripts/basic/fixdep > make all HOSTCC scripts/kconfig/conf.o > > SHIPPED scripts/kconfig/zconf.tab.c > SHIPPED scripts/kconfig/zconf.lex.c > SHIPPED scripts/kconfig/zconf.hash.c > HOSTCC scripts/kconfig/zconf.tab.o > HOSTLD scripts/kconfig/conf > # > # configuration written to .config > # > hs@localhost:u-boot [master] $ make all scripts/kconfig/conf --silentoldconfig > Kconfig [...] > LD spl/u-boot-spl > OBJCOPY spl/u-boot-spl.bin > CFG spl/u-boot-spl.cfg > MKIMAGE boot.bin > MKIMAGE u-boot.img > hs@localhost:u-boot [master] $ > hs@localhost:u-boot [master] $ ls -al spl/u-boot-spl.bin -rwxrwxr-x. 1 hs hs 15824 > 9. Dez 08:56 spl/u-boot-spl.bin hs@localhost:u-boot [master] $ > > Use another toolchain? How big is your spl/u-boot-spl.bin ? I will try another toolchain. The size of spl/u-boot-spl.bin is 16048 generated by my current toolchain. ---8<----- $ ls -l spl/u-boot-spl.bin -rwxrwxr-x 1 wyang wyang 16048 Dec 9 16:16 spl/u-boot-spl.bin --->8---- Maybe the "CONFIG_SPL_MAX_SIZE" should be changed to bigger one, not above 16K. It will be OK. > > bye, > Heiko > > > >> > >> Here current build of u-boot on travis-ci.org: > >> with eldk-5.4: > >> https://travis-ci.org/u-boot/u-boot/jobs/95590341 > >> https://travis-ci.org/u-boot/u-boot/jobs/95590311 > >> > >> bye, > >> Heiko > >>> > >>> diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig > >>> index > >>> d59912c..557b066 100644 > >>> --- a/configs/taurus_defconfig > >>> +++ b/configs/taurus_defconfig > >>> @@ -1,7 +1,6 @@ > >>> CONFIG_ARM=y > >>> CONFIG_ARCH_AT91=y > >>> CONFIG_TARGET_TAURUS=y > >>> -CONFIG_SPL=y > >>> > >> > CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_ > >> TAURUS" > >>> CONFIG_SYS_PROMPT="U-Boot> " > >>> # CONFIG_CMD_BDI is not set > >>> > >> > >> -- > >> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > >> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > > > > Best Regards, > > Wenyou Yang > > > > -- > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Best Regards, Wenyou Yang
Hello Wenyou, Am 09.12.2015 um 09:34 schrieb Yang, Wenyou: > Hi > >> -----Original Message----- >> From: Heiko Schocher [mailto:hs@denx.de] >> Sent: 2015年12月9日 16:00 >> To: Yang, Wenyou <Wenyou.Yang@atmel.com> >> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; andreas.devel@googlemail.com; >> Meier, Roger <r.meier@siemens.com> >> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL >> >> Hello Wenyou, >> >> Am 09.12.2015 um 08:43 schrieb Yang, Wenyou: >>> Hello Heiko, >>> >>>> -----Original Message----- >>>> From: Heiko Schocher [mailto:hs@denx.de] >>>> Sent: 2015年12月9日 15:39 >>>> To: Yang, Wenyou <Wenyou.Yang@atmel.com> >>>> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; >>>> andreas.devel@googlemail.com; Meier, Roger <r.meier@siemens.com> >>>> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL >>>> >>>> Hello Wenyou, >>>> >>>> Am 09.12.2015 um 08:15 schrieb Wenyou Yang: >>>>> Build SPL with taurus_defconfig defconfig file. >>>>> It build fails with following log message: >>>>> >>>>> ---8< ---- >>>>> $ make mrproper >>>>> $ make taurus_defconfig >>>>> $ make SPL >>>>> [...] >>>>> LD spl/lib/built-in.o >>>>> LDS spl/u-boot-spl.lds >>>>> LD spl/u-boot-spl >>>>> arm-none-linux-gnueabi-ld: SPL image too big >>>>> make[1]: *** [spl/u-boot-spl] Error 1 >>>>> make: *** [spl/u-boot-spl] Error 2 >>>>> --->8---- >>>>> >>>>> This board code is not ready for SPL for now, so disable CONFIG_SPL. >>>>> >>>>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> >>>>> --- >>>>> >>>>> configs/taurus_defconfig | 1 - >>>>> 1 file changed, 1 deletion(-) >>>> >>>> NACK. >>>> >>>> With which toolchain? >>> >>> The toolchain is Sourcery CodeBench Lite 2013.05-24. Here is the >>> toolchain information, >>> >>> ---8<----- >>> $ arm-none-linux-gnueabi-gcc -v >>> Using built-in specs. >>> COLLECT_GCC=arm-none-linux-gnueabi-gcc >>> COLLECT_LTO_WRAPPER=/home/wyang/opt/arm- >> 2013.05/bin/../libexec/gcc/arm >>> -none-linux-gnueabi/4.7.3/lto-wrapper >>> Target: arm-none-linux-gnueabi >>> Configured with: >>> /scratch/jbrown/2013.05-arm-linux-release/src/gcc-4.7-2013.05/configur >>> e --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu >>> --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap >>> --disable-libssp --disable-libstdcxx-pch >>> --enable-extra-sgxxlite-multilibs --with-arch=armv5te --with-gnu-as >>> --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm} >>> %{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:-fu >>> nwind-tables} -D__CS_SOURCERYGXX_MAJ__=2013 - >> D__CS_SOURCERYGXX_MIN__=5 >>> -D__CS_SOURCERYGXX_REV__=24 %{O2:%{!fno-remove-local-statics: >>> -fremove-local-statics}} >>> %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: >>> -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared >>> --enable-lto --enable-symvers=gnu --enable-__cxa_atexit >>> --with-pkgversion='Sourcery CodeBench Lite 2013.05-24' >>> --with-bugurl=https://sourcery.mentor.com/GNUToolchain/ --disable-nls >>> --prefix=/opt/codesourcery >>> --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --w >> i >> th-build-sysroot=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux- >> gnueabi/libc --with-gmp=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg- >> 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux- >> gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with- >> mpfr=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none- >> linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc- >> linux-gnu/usr --with-mpc=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg- >> 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux- >> gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-ppl=/scratch/jbrown/2013.05- >> arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24- >> arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-host- >> libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with- >> cloog=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none- >> linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extr >> a >> s/host-libs-i686-pc-linux-gnu/usr --with-libelf=/scratch/jbrown/2013.05-arm-linux- >> release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none- >> linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --disable-libgomp --disable- >> libitm --enable-poison-system-directories --with-build-time- >> tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux- >> gnueabi/bin --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux- >> release/install/arm-none-linux-gnueabi/bin >>> Thread model: posix >>> gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) >>> --->8--------- >> >> Just tried with >> >> hs@localhost:u-boot [master] $ arm-unknown-linux-gnueabi-gcc -v Using built-in >> specs. >> COLLECT_GCC=arm-unknown-linux-gnueabi-gcc >> COLLECT_LTO_WRAPPER=/home/hs/data/Entwicklung/zug/cacheperformance/c >> rosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/libexec/gcc/arm- >> unknown-linux-gnueabi/5.2.1/lto-wrapper >> Target: arm-unknown-linux-gnueabi >> Configured with: >> /home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/src/gcc- >> custom/configure >> --build=x86_64-build_unknown-linux-gnu --host=x86_64-build_unknown-linux-gnu >> --target=arm-unknown-linux-gnueabi >> --prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro- >> 5.2-20151110/arm-unknown-linux-gnueabi >> --with-sysroot=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools- >> linaro-5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux- >> gnueabi/sysroot >> --enable-languages=c --with-pkgversion='crosstool-NG 1.21.0' --enable- >> __cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable- >> libquadmath --disable-libquadmath-support --disable-libsanitizer --with- >> gmp=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- >> unknown-linux-gnueabi/buildtools >> --with- >> mpfr=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- >> unknown-linux-gnueabi/buildtools >> --with- >> mpc=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- >> unknown-linux-gnueabi/buildtools >> --with-ppl=no --with-isl=no --with-cloog=no --with- >> libelf=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm- >> unknown-linux-gnueabi/buildtools >> --enable-threads=posix --enable-target-optspace --disable-nls --disable-multilib -- >> with-local- >> prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro- >> 5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot >> --enable-c99 --enable-long-long >> Thread model: posix >> gcc version 5.2.1 20151110 (crosstool-NG 1.21.0) hs@localhost:u-boot [master] >> $ >> >> hs@localhost:u-boot [master] $ make taurus_defconfig >> HOSTCC scripts/basic/fixdep >> make all HOSTCC scripts/kconfig/conf.o >> >> SHIPPED scripts/kconfig/zconf.tab.c >> SHIPPED scripts/kconfig/zconf.lex.c >> SHIPPED scripts/kconfig/zconf.hash.c >> HOSTCC scripts/kconfig/zconf.tab.o >> HOSTLD scripts/kconfig/conf >> # >> # configuration written to .config >> # >> hs@localhost:u-boot [master] $ make all scripts/kconfig/conf --silentoldconfig >> Kconfig [...] >> LD spl/u-boot-spl >> OBJCOPY spl/u-boot-spl.bin >> CFG spl/u-boot-spl.cfg >> MKIMAGE boot.bin >> MKIMAGE u-boot.img >> hs@localhost:u-boot [master] $ >> hs@localhost:u-boot [master] $ ls -al spl/u-boot-spl.bin -rwxrwxr-x. 1 hs hs 15824 >> 9. Dez 08:56 spl/u-boot-spl.bin hs@localhost:u-boot [master] $ >> >> Use another toolchain? How big is your spl/u-boot-spl.bin ? > > I will try another toolchain. > The size of spl/u-boot-spl.bin is 16048 generated by my current toolchain. > > ---8<----- > $ ls -l spl/u-boot-spl.bin > -rwxrwxr-x 1 wyang wyang 16048 Dec 9 16:16 spl/u-boot-spl.bin > --->8---- > > Maybe the "CONFIG_SPL_MAX_SIZE" should be changed to bigger one, not above 16K. It will be OK. There are only 16K sram for SPL ... we need some bytes also for the stack ... bye, Heiko > >> >> bye, >> Heiko >>> >>>> >>>> Here current build of u-boot on travis-ci.org: >>>> with eldk-5.4: >>>> https://travis-ci.org/u-boot/u-boot/jobs/95590341 >>>> https://travis-ci.org/u-boot/u-boot/jobs/95590311 >>>> >>>> bye, >>>> Heiko >>>>> >>>>> diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig >>>>> index >>>>> d59912c..557b066 100644 >>>>> --- a/configs/taurus_defconfig >>>>> +++ b/configs/taurus_defconfig >>>>> @@ -1,7 +1,6 @@ >>>>> CONFIG_ARM=y >>>>> CONFIG_ARCH_AT91=y >>>>> CONFIG_TARGET_TAURUS=y >>>>> -CONFIG_SPL=y >>>>> >>>> >> CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_ >>>> TAURUS" >>>>> CONFIG_SYS_PROMPT="U-Boot> " >>>>> # CONFIG_CMD_BDI is not set >>>>> >>>> >>>> -- >>>> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk >>>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany >>> >>> Best Regards, >>> Wenyou Yang >>> >> >> -- >> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk >> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > > > Best Regards, > Wenyou Yang >
Hello Heiko, > -----Original Message----- > From: Heiko Schocher [mailto:hs@denx.de] > Sent: 2015年12月9日 16:46 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de>; andreas.devel@googlemail.com; > Meier, Roger <r.meier@siemens.com> > Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL > > Hello Wenyou, > > Am 09.12.2015 um 09:34 schrieb Yang, Wenyou: > > Hi > > > >> -----Original Message----- > >> From: Heiko Schocher [mailto:hs@denx.de] > >> Sent: 2015年12月9日 16:00 > >> To: Yang, Wenyou <Wenyou.Yang@atmel.com> > >> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; > >> andreas.devel@googlemail.com; Meier, Roger <r.meier@siemens.com> > >> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL > >> > >> Hello Wenyou, > >> > >> Am 09.12.2015 um 08:43 schrieb Yang, Wenyou: > >>> Hello Heiko, > >>> > >>>> -----Original Message----- > >>>> From: Heiko Schocher [mailto:hs@denx.de] > >>>> Sent: 2015年12月9日 15:39 > >>>> To: Yang, Wenyou <Wenyou.Yang@atmel.com> > >>>> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; > >>>> andreas.devel@googlemail.com; Meier, Roger <r.meier@siemens.com> > >>>> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL > >>>> > >>>> Hello Wenyou, > >>>> > >>>> Am 09.12.2015 um 08:15 schrieb Wenyou Yang: > >>>>> Build SPL with taurus_defconfig defconfig file. > >>>>> It build fails with following log message: > >>>>> > >>>>> ---8< ---- > >>>>> $ make mrproper > >>>>> $ make taurus_defconfig > >>>>> $ make SPL > >>>>> [...] > >>>>> LD spl/lib/built-in.o > >>>>> LDS spl/u-boot-spl.lds > >>>>> LD spl/u-boot-spl > >>>>> arm-none-linux-gnueabi-ld: SPL image too big > >>>>> make[1]: *** [spl/u-boot-spl] Error 1 > >>>>> make: *** [spl/u-boot-spl] Error 2 > >>>>> --->8---- > >>>>> > >>>>> This board code is not ready for SPL for now, so disable CONFIG_SPL. > >>>>> > >>>>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > >>>>> --- > >>>>> > >>>>> configs/taurus_defconfig | 1 - > >>>>> 1 file changed, 1 deletion(-) > >>>> > >>>> NACK. > >>>> > >>>> With which toolchain? > >>> > >>> The toolchain is Sourcery CodeBench Lite 2013.05-24. Here is the > >>> toolchain information, > >>> > >>> ---8<----- > >>> $ arm-none-linux-gnueabi-gcc -v > >>> Using built-in specs. > >>> COLLECT_GCC=arm-none-linux-gnueabi-gcc > >>> COLLECT_LTO_WRAPPER=/home/wyang/opt/arm- > >> 2013.05/bin/../libexec/gcc/arm > >>> -none-linux-gnueabi/4.7.3/lto-wrapper > >>> Target: arm-none-linux-gnueabi > >>> Configured with: > >>> /scratch/jbrown/2013.05-arm-linux-release/src/gcc-4.7-2013.05/config > >>> ur e --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu > >>> --target=arm-none-linux-gnueabi --enable-threads > >>> --disable-libmudflap --disable-libssp --disable-libstdcxx-pch > >>> --enable-extra-sgxxlite-multilibs --with-arch=armv5te --with-gnu-as > >>> --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm} > >>> %{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:- > >>> fu nwind-tables} -D__CS_SOURCERYGXX_MAJ__=2013 - > >> D__CS_SOURCERYGXX_MIN__=5 > >>> -D__CS_SOURCERYGXX_REV__=24 %{O2:%{!fno-remove-local-statics: > >>> -fremove-local-statics}} > >>> %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: > >>> -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared > >>> --enable-lto --enable-symvers=gnu --enable-__cxa_atexit > >>> --with-pkgversion='Sourcery CodeBench Lite 2013.05-24' > >>> --with-bugurl=https://sourcery.mentor.com/GNUToolchain/ > >>> --disable-nls --prefix=/opt/codesourcery > >>> --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --w > >> i > >> th-build-sysroot=/scratch/jbrown/2013.05-arm-linux-release/install/ar > >> m-none-linux- gnueabi/libc > >> --with-gmp=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg- > >> 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux- > >> gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with- > >> mpfr=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm > >> -none- > >> linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs- > >> i686-pc- linux-gnu/usr > >> --with-mpc=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg- > >> 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux- > >> gnueabi.extras/host-libs-i686-pc-linux-gnu/usr > >> --with-ppl=/scratch/jbrown/2013.05- > >> arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013. > >> 05-24- arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr > >> --with-host- libstdcxx='-static-libgcc > >> -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with- > >> cloog=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-ar > >> m-none- linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extr > >> a > >> s/host-libs-i686-pc-linux-gnu/usr > >> --with-libelf=/scratch/jbrown/2013.05-arm-linux- > >> release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm- > >> none- linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr > >> --disable-libgomp --disable- libitm > >> --enable-poison-system-directories --with-build-time- > >> tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linu > >> x- gnueabi/bin > >> --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux- > >> release/install/arm-none-linux-gnueabi/bin > >>> Thread model: posix > >>> gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) > >>> --->8--------- > >> > >> Just tried with > >> > >> hs@localhost:u-boot [master] $ arm-unknown-linux-gnueabi-gcc -v > >> Using built-in specs. > >> COLLECT_GCC=arm-unknown-linux-gnueabi-gcc > >> > COLLECT_LTO_WRAPPER=/home/hs/data/Entwicklung/zug/cacheperformance/c > >> rosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/libexec/ > >> gcc/arm- unknown-linux-gnueabi/5.2.1/lto-wrapper > >> Target: arm-unknown-linux-gnueabi > >> Configured with: > >> /home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/src/g > >> cc- > >> custom/configure > >> --build=x86_64-build_unknown-linux-gnu > >> --host=x86_64-build_unknown-linux-gnu > >> --target=arm-unknown-linux-gnueabi > >> --prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/too > >> ls-linaro- 5.2-20151110/arm-unknown-linux-gnueabi > >> --with-sysroot=/home/hs/data/Entwicklung/zug/cacheperformance/crossto > >> ol/tools- > >> linaro-5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux- > >> gnueabi/sysroot > >> --enable-languages=c --with-pkgversion='crosstool-NG 1.21.0' > >> --enable- __cxa_atexit --disable-libmudflap --disable-libgomp > >> --disable-libssp --disable- libquadmath --disable-libquadmath-support > >> --disable-libsanitizer --with- > >> gmp=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/a > >> rm- > >> unknown-linux-gnueabi/buildtools > >> --with- > >> mpfr=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/ > >> arm- > >> unknown-linux-gnueabi/buildtools > >> --with- > >> mpc=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/a > >> rm- > >> unknown-linux-gnueabi/buildtools > >> --with-ppl=no --with-isl=no --with-cloog=no --with- > >> libelf=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.buil > >> d/arm- > >> unknown-linux-gnueabi/buildtools > >> --enable-threads=posix --enable-target-optspace --disable-nls > >> --disable-multilib -- > >> with-local- > >> prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools > >> -linaro- > >> 5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysr > >> oot > >> --enable-c99 --enable-long-long > >> Thread model: posix > >> gcc version 5.2.1 20151110 (crosstool-NG 1.21.0) hs@localhost:u-boot > >> [master] $ > >> > >> hs@localhost:u-boot [master] $ make taurus_defconfig > >> HOSTCC scripts/basic/fixdep > >> make all HOSTCC scripts/kconfig/conf.o > >> > >> SHIPPED scripts/kconfig/zconf.tab.c > >> SHIPPED scripts/kconfig/zconf.lex.c > >> SHIPPED scripts/kconfig/zconf.hash.c > >> HOSTCC scripts/kconfig/zconf.tab.o > >> HOSTLD scripts/kconfig/conf > >> # > >> # configuration written to .config > >> # > >> hs@localhost:u-boot [master] $ make all scripts/kconfig/conf > >> --silentoldconfig Kconfig [...] > >> LD spl/u-boot-spl > >> OBJCOPY spl/u-boot-spl.bin > >> CFG spl/u-boot-spl.cfg > >> MKIMAGE boot.bin > >> MKIMAGE u-boot.img > >> hs@localhost:u-boot [master] $ > >> hs@localhost:u-boot [master] $ ls -al spl/u-boot-spl.bin -rwxrwxr-x. > >> 1 hs hs 15824 9. Dez 08:56 spl/u-boot-spl.bin hs@localhost:u-boot > >> [master] $ > >> > >> Use another toolchain? How big is your spl/u-boot-spl.bin ? > > > > I will try another toolchain. > > The size of spl/u-boot-spl.bin is 16048 generated by my current toolchain. > > > > ---8<----- > > $ ls -l spl/u-boot-spl.bin > > -rwxrwxr-x 1 wyang wyang 16048 Dec 9 16:16 spl/u-boot-spl.bin > > --->8---- > > > > Maybe the "CONFIG_SPL_MAX_SIZE" should be changed to bigger one, not > above 16K. It will be OK. > > There are only 16K sram for SPL ... we need some bytes also for the stack ... Yes, there are 512 bytes reserved for the stack. I think 256 bytes is enough. Anyway, it can succeed to compile with your toolchain. > > bye, > Heiko > > > >> > >> bye, > >> Heiko > >>> > >>>> > >>>> Here current build of u-boot on travis-ci.org: > >>>> with eldk-5.4: > >>>> https://travis-ci.org/u-boot/u-boot/jobs/95590341 > >>>> https://travis-ci.org/u-boot/u-boot/jobs/95590311 > >>>> > >>>> bye, > >>>> Heiko > >>>>> > >>>>> diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig > >>>>> index > >>>>> d59912c..557b066 100644 > >>>>> --- a/configs/taurus_defconfig > >>>>> +++ b/configs/taurus_defconfig > >>>>> @@ -1,7 +1,6 @@ > >>>>> CONFIG_ARM=y > >>>>> CONFIG_ARCH_AT91=y > >>>>> CONFIG_TARGET_TAURUS=y > >>>>> -CONFIG_SPL=y > >>>>> > >>>> > >> > CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_ > >>>> TAURUS" > >>>>> CONFIG_SYS_PROMPT="U-Boot> " > >>>>> # CONFIG_CMD_BDI is not set > >>>>> Best Regards, Wenyou Yang
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index d59912c..557b066 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_TAURUS=y -CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set
Build SPL with taurus_defconfig defconfig file. It build fails with following log message: ---8< ---- $ make mrproper $ make taurus_defconfig $ make SPL [...] LD spl/lib/built-in.o LDS spl/u-boot-spl.lds LD spl/u-boot-spl arm-none-linux-gnueabi-ld: SPL image too big make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 --->8---- This board code is not ready for SPL for now, so disable CONFIG_SPL. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> --- configs/taurus_defconfig | 1 - 1 file changed, 1 deletion(-)