From patchwork Wed Oct 28 10:46:35 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dirk Eibach X-Patchwork-Id: 537291 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 366781402B8 for ; Wed, 28 Oct 2015 21:49:12 +1100 (AEDT) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 9C84C4B6B2; Wed, 28 Oct 2015 11:48:57 +0100 (CET) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id QnZnXZnCROwO; Wed, 28 Oct 2015 11:48:57 +0100 (CET) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id B90414B6B5; Wed, 28 Oct 2015 11:48:34 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id D1AF04B622 for ; Wed, 28 Oct 2015 11:48:22 +0100 (CET) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id mGCDHJTyFE0x for ; Wed, 28 Oct 2015 11:48:22 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from smtprelay03.ispgateway.de (smtprelay03.ispgateway.de [80.67.31.30]) by theia.denx.de (Postfix) with ESMTPS id 6696B4B62C for ; Wed, 28 Oct 2015 11:48:22 +0100 (CET) Received: from [217.7.185.210] (helo=bob3.testumgebung.local) by smtprelay03.ispgateway.de with esmtpa (Exim 4.84) (envelope-from ) id 1ZrOG7-0003Fm-0F; Wed, 28 Oct 2015 11:47:11 +0100 From: dirk.eibach@gdsys.cc To: u-boot@lists.denx.de Date: Wed, 28 Oct 2015 11:46:35 +0100 Message-Id: <1446029199-11704-15-git-send-email-dirk.eibach@gdsys.cc> X-Mailer: git-send-email 2.1.3 In-Reply-To: <1446029199-11704-1-git-send-email-dirk.eibach@gdsys.cc> References: <1446029199-11704-1-git-send-email-dirk.eibach@gdsys.cc> X-Df-Sender: ZGlyay5laWJhY2hAZ2RzeXMuY2M= Cc: Dirk Eibach , Tom Rini , Stefan Roese Subject: [U-Boot] [PATCH v1 14/18] hrcon: Add support for the DH variant X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" From: Dirk Eibach hrcon DH(dual head) has two video outputs per FPGA. Signed-off-by: Dirk Eibach --- board/gdsys/common/osd.c | 111 +++++++++++++++++++++++++++++++--------- board/gdsys/mpc8308/MAINTAINERS | 1 + board/gdsys/mpc8308/hrcon.c | 31 +++++++++-- configs/hrcon_dh_defconfig | 5 ++ drivers/i2c/soft_i2c.c | 28 ++++++++++ include/configs/hrcon.h | 56 ++++++++++++++++++++ include/gdsys_fpga.h | 30 +++++++---- 7 files changed, 225 insertions(+), 37 deletions(-) create mode 100644 configs/hrcon_dh_defconfig diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index f11e26f..b288df8 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -28,12 +28,45 @@ #define PIXCLK_640_480_60 25180000 +#ifdef CONFIG_SYS_OSD_DH +#define MAX_OSD_SCREEN 8 +#define OSD_DH_BASE 4 +#else +#define MAX_OSD_SCREEN 4 +#endif + +#ifdef CONFIG_SYS_OSD_DH +#define OSD_SET_REG(screen, fld, val) \ + do { \ + if (screen >= OSD_DH_BASE) \ + FPGA_SET_REG(screen - OSD_DH_BASE, osd1.fld, val); \ + else \ + FPGA_SET_REG(screen, osd0.fld, val); \ + } while (0) +#else +#define OSD_SET_REG(screen, fld, val) \ + FPGA_SET_REG(screen, osd0.fld, val) +#endif + +#ifdef CONFIG_SYS_OSD_DH +#define OSD_GET_REG(screen, fld, val) \ + do { \ + if (screen >= OSD_DH_BASE) \ + FPGA_GET_REG(screen - OSD_DH_BASE, osd1.fld, val); \ + else \ + FPGA_GET_REG(screen, osd0.fld, val); \ + } while (0) +#else +#define OSD_GET_REG(screen, fld, val) \ + FPGA_GET_REG(screen, osd0.fld, val) +#endif + unsigned int base_width; unsigned int base_height; size_t bufsize; u16 *buf; -unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1; +unsigned int osd_screen_mask = 0; #ifdef CONFIG_SYS_ICS8N3QV01_I2C int ics8n3qv01_i2c[] = CONFIG_SYS_ICS8N3QV01_I2C; @@ -47,6 +80,9 @@ int sil1178_i2c[] = CONFIG_SYS_SIL1178_I2C; int dp501_i2c[] = CONFIG_SYS_DP501_I2C; #endif +#ifdef CONFIG_SYS_DP501_BASE +int dp501_base[] = CONFIG_SYS_DP501_BASE; +#endif #ifdef CONFIG_SYS_MPC92469AC static void mpc92469ac_calc_parameters(unsigned int fout, @@ -216,7 +252,15 @@ static int osd_write_videomem(unsigned screen, unsigned offset, for (k = 0; k < charcount; ++k) { if (offset + k >= bufsize) return -1; - FPGA_SET_REG(screen, videomem[offset + k], data[k]); +#ifdef CONFIG_SYS_OSD_DH + if (screen >= OSD_DH_BASE) + FPGA_SET_REG(screen - OSD_DH_BASE, + videomem1[offset + k], data[k]); + else + FPGA_SET_REG(screen, videomem0[offset + k], data[k]); +#else + FPGA_SET_REG(screen, videomem0[offset + k], data[k]); +#endif } return charcount; @@ -226,7 +270,12 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned screen; - for (screen = 0; screen <= max_osd_screen; ++screen) { + if (argc < 5) { + cmd_usage(cmdtp); + return 1; + } + + for (screen = 0; screen < MAX_OSD_SCREEN; ++screen) { unsigned x; unsigned y; unsigned charcount; @@ -236,10 +285,8 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *text; int res; - if (argc < 5) { - cmd_usage(cmdtp); - return 1; - } + if (!(osd_screen_mask & (1 << screen))) + continue; x = simple_strtoul(argv[1], NULL, 16); y = simple_strtoul(argv[2], NULL, 16); @@ -266,9 +313,16 @@ int osd_probe(unsigned screen) int old_bus = i2c_get_bus_num(); bool pixclock_present = false; bool output_driver_present = false; +#ifdef CONFIG_SYS_DP501_I2C +#ifdef CONFIG_SYS_DP501_BASE + uint8_t dp501_addr = dp501_base[screen]; +#else + uint8_t dp501_addr = DP501_I2C_ADDR; +#endif +#endif - FPGA_GET_REG(0, osd.version, &version); - FPGA_GET_REG(0, osd.features, &features); + OSD_GET_REG(0, version, &version); + OSD_GET_REG(0, features, &features); base_width = ((features & 0x3f00) >> 8) + 1; base_height = (features & 0x001f) + 1; @@ -277,9 +331,15 @@ int osd_probe(unsigned screen) if (!buf) return -1; +#ifdef CONFIG_SYS_OSD_DH + printf("OSD%d-%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n", + (screen >= OSD_DH_BASE) ? (screen - OSD_DH_BASE) : screen, + (screen > 3) ? 1 : 0, version/100, version%100, base_width, + base_height); +#else printf("OSD%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n", - screen, version/100, version%100, base_width, base_height); - + screen, version/100, version%100, base_width, base_height); +#endif /* setup pixclock */ #ifdef CONFIG_SYS_MPC92469AC @@ -330,8 +390,8 @@ int osd_probe(unsigned screen) #ifdef CONFIG_SYS_DP501_I2C i2c_set_bus_num(dp501_i2c[screen]); - if (!i2c_probe(DP501_I2C_ADDR)) { - dp501_powerup(DP501_I2C_ADDR); + if (!i2c_probe(dp501_addr)) { + dp501_powerup(dp501_addr); output_driver_present = true; } #endif @@ -339,14 +399,14 @@ int osd_probe(unsigned screen) if (!output_driver_present) printf(" no output driver found\n"); - FPGA_SET_REG(screen, osd.control, 0x0049); + OSD_SET_REG(screen, control, 0x0049); - FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1)); - FPGA_SET_REG(screen, osd.x_pos, 0x007f); - FPGA_SET_REG(screen, osd.y_pos, 0x005f); + OSD_SET_REG(screen, xy_size, ((32 - 1) << 8) | (16 - 1)); + OSD_SET_REG(screen, x_pos, 0x007f); + OSD_SET_REG(screen, y_pos, 0x005f); - if (screen > max_osd_screen) - max_osd_screen = screen; + if (pixclock_present && output_driver_present) + osd_screen_mask |= 1 << screen; i2c_set_bus_num(old_bus); @@ -357,7 +417,12 @@ int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned screen; - for (screen = 0; screen <= max_osd_screen; ++screen) { + if ((argc < 4) || (strlen(argv[3]) % 4)) { + cmd_usage(cmdtp); + return 1; + } + + for (screen = 0; screen < MAX_OSD_SCREEN; ++screen) { unsigned x; unsigned y; unsigned k; @@ -367,10 +432,8 @@ int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned count = (argc > 4) ? simple_strtoul(argv[4], NULL, 16) : 1; - if ((argc < 4) || (strlen(argv[3]) % 4)) { - cmd_usage(cmdtp); - return 1; - } + if (!(osd_screen_mask & (1 << screen))) + continue; x = simple_strtoul(argv[1], NULL, 16); y = simple_strtoul(argv[2], NULL, 16); diff --git a/board/gdsys/mpc8308/MAINTAINERS b/board/gdsys/mpc8308/MAINTAINERS index 35704bc..3895b01 100644 --- a/board/gdsys/mpc8308/MAINTAINERS +++ b/board/gdsys/mpc8308/MAINTAINERS @@ -4,6 +4,7 @@ S: Maintained F: board/gdsys/mpc8308/ F: include/configs/hrcon.h F: configs/hrcon_defconfig +F: configs/hrcon_dh_defconfig F: include/configs/strider.h F: configs/strider_cpu_defconfig F: configs/strider_con_defconfig diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c index 5492718..3cc03cb 100644 --- a/board/gdsys/mpc8308/hrcon.c +++ b/board/gdsys/mpc8308/hrcon.c @@ -128,6 +128,7 @@ int last_stage_init(void) /* Turn on Parade DP501 */ pca9698_direction_output(0x20, 10, 1); + pca9698_direction_output(0x20, 11, 1); ch0_rgmii2_present = !pca9698_get_value(0x20, 30); @@ -174,6 +175,9 @@ int last_stage_init(void) ioep_fpga_print_info(0); osd_probe(0); +#ifdef CONFIG_SYS_OSD_DH + osd_probe(4); +#endif if (slaves <= 0) return 0; @@ -185,6 +189,9 @@ int last_stage_init(void) ioep_fpga_print_info(k); osd_probe(k); +#ifdef CONFIG_SYS_OSD_DH + osd_probe(k + 4); +#endif if (hw_type_cat) { miiphy_register(bb_miiphy_buses[k].name, bb_miiphy_read, bb_miiphy_write); @@ -196,28 +203,44 @@ int last_stage_init(void) } /* - * provide access to fpga gpios (for I2C bitbang) + * provide access to fpga gpios and controls (for I2C bitbang) * (these may look all too simple but make iocon.h much more readable) */ void fpga_gpio_set(unsigned int bus, int pin) { - FPGA_SET_REG(bus, gpio.set, pin); + FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.set, pin); } void fpga_gpio_clear(unsigned int bus, int pin) { - FPGA_SET_REG(bus, gpio.clear, pin); + FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.clear, pin); } int fpga_gpio_get(unsigned int bus, int pin) { u16 val; - FPGA_GET_REG(bus, gpio.read, &val); + FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, gpio.read, &val); return val & pin; } +void fpga_control_set(unsigned int bus, int pin) +{ + u16 val; + + FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, control, &val); + FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val | pin); +} + +void fpga_control_clear(unsigned int bus, int pin) +{ + u16 val; + + FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, control, &val); + FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val & ~pin); +} + void mpc8308_init(void) { pca9698_direction_output(0x20, 4, 1); diff --git a/configs/hrcon_dh_defconfig b/configs/hrcon_dh_defconfig new file mode 100644 index 0000000..a059dd9 --- /dev/null +++ b/configs/hrcon_dh_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="HRCON_DH" + +CONFIG_PPC=y +CONFIG_MPC83xx=y +CONFIG_TARGET_HRCON=y diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index db9b402..b000a0e 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -473,3 +473,31 @@ U_BOOT_I2C_ADAP_COMPLETE(soft3, soft_i2c_init, soft_i2c_probe, CONFIG_SYS_I2C_SOFT_SLAVE_4, 3) #endif +#if defined(I2C_SOFT_DECLARATIONS5) +U_BOOT_I2C_ADAP_COMPLETE(soft4, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_5, + CONFIG_SYS_I2C_SOFT_SLAVE_5, + 4) +#endif +#if defined(I2C_SOFT_DECLARATIONS6) +U_BOOT_I2C_ADAP_COMPLETE(soft5, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_6, + CONFIG_SYS_I2C_SOFT_SLAVE_6, + 5) +#endif +#if defined(I2C_SOFT_DECLARATIONS7) +U_BOOT_I2C_ADAP_COMPLETE(soft6, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_7, + CONFIG_SYS_I2C_SOFT_SLAVE_7, + 6) +#endif +#if defined(I2C_SOFT_DECLARATIONS8) +U_BOOT_I2C_ADAP_COMPLETE(soft7, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_8, + CONFIG_SYS_I2C_SOFT_SLAVE_8, + 7) +#endif diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index f1a69a3..bdc56ef 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -20,7 +20,11 @@ #define CONFIG_SYS_TEXT_BASE 0xFE000000 +#ifdef CONFIG_HRCON_DH +#define CONFIG_IDENT_STRING " hrcon dh 0.01" +#else #define CONFIG_IDENT_STRING " hrcon 0.01" +#endif #define CONFIG_SYS_GENERIC_BOARD @@ -344,6 +348,22 @@ #define CONFIG_SYS_I2C_IHS_SPEED_3 50000 #define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F +#ifdef CONFIG_HRCON_DH +#define CONFIG_SYS_I2C_IHS_DUAL +#define CONFIG_SYS_I2C_IHS_CH0_1 +#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH1_1 +#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2_1 +#define CONFIG_SYS_I2C_IHS_SPEED_2_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH3_1 +#define CONFIG_SYS_I2C_IHS_SPEED_3_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3_1 0x7F +#endif + /* * Software (bit-bang) I2C driver configuration */ @@ -360,16 +380,48 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F +#ifdef CONFIG_HRCON_DH +#define I2C_SOFT_DECLARATIONS5 +#define CONFIG_SYS_I2C_SOFT_SPEED_5 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F +#define I2C_SOFT_DECLARATIONS6 +#define CONFIG_SYS_I2C_SOFT_SPEED_6 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_6 0x7F +#define I2C_SOFT_DECLARATIONS7 +#define CONFIG_SYS_I2C_SOFT_SPEED_7 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_7 0x7F +#define I2C_SOFT_DECLARATIONS8 +#define CONFIG_SYS_I2C_SOFT_SPEED_8 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F +#endif + +#ifdef CONFIG_HRCON_DH +#define CONFIG_SYS_ICS8N3QV01_I2C {9, 10, 11, 12, 13, 14, 15, 16} +#define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8} +#else #define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} #define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} +#endif #ifndef __ASSEMBLY__ void fpga_gpio_set(unsigned int bus, int pin); void fpga_gpio_clear(unsigned int bus, int pin); int fpga_gpio_get(unsigned int bus, int pin); +void fpga_control_set(unsigned int bus, int pin); +void fpga_control_clear(unsigned int bus, int pin); #endif +#ifdef CONFIG_HRCON_DH +#define I2C_ACTIVE \ + do { \ + if (I2C_ADAP_HWNR > 3) \ + fpga_control_set(I2C_ADAP_HWNR, 0x0004); \ + else \ + fpga_control_clear(I2C_ADAP_HWNR, 0x0004); \ + } while (0) +#else #define I2C_ACTIVE { } +#endif #define I2C_TRISTATE { } #define I2C_READ \ (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0) @@ -402,6 +454,10 @@ int fpga_gpio_get(unsigned int bus, int pin); #define CONFIG_SYS_DP501_DIFFERENTIAL #define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ +#ifdef CONFIG_HRCON_DH +#define CONFIG_SYS_OSD_DH +#endif + /* * General PCI * Addresses are mapped 1-1. diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 69d248f..3b8762d 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -157,9 +157,9 @@ struct ihs_fpga { u16 mc_rx_data; /* 0x0072 */ u16 reserved_5[69]; /* 0x0074 */ u16 reflection_high; /* 0x00fe */ - struct ihs_osd osd; /* 0x0100 */ + struct ihs_osd osd0; /* 0x0100 */ u16 reserved_6[889]; /* 0x010e */ - u16 videomem[31736]; /* 0x0800 */ + u16 videomem0[2048]; /* 0x0800 */ }; #endif @@ -171,7 +171,9 @@ struct ihs_fpga { u16 fpga_features; /* 0x0006 */ u16 reserved_0[1]; /* 0x0008 */ u16 top_interrupt; /* 0x000a */ - u16 reserved_1[4]; /* 0x000c */ + u16 reserved_1[2]; /* 0x000c */ + u16 control; /* 0x0010 */ + u16 extended_control; /* 0x0012 */ struct ihs_gpio gpio; /* 0x0014 */ u16 mpc3w_control; /* 0x001a */ u16 reserved_2[2]; /* 0x001c */ @@ -191,9 +193,19 @@ struct ihs_fpga { u16 mc_rx_data; /* 0x0072 */ u16 reserved_5[69]; /* 0x0074 */ u16 reflection_high; /* 0x00fe */ - struct ihs_osd osd; /* 0x0100 */ + struct ihs_osd osd0; /* 0x0100 */ +#ifdef CONFIG_SYS_OSD_DH + u16 reserved_6[57]; /* 0x010e */ + struct ihs_osd osd1; /* 0x0180 */ + u16 reserved_7[9]; /* 0x018e */ + struct ihs_i2c i2c1; /* 0x01a0 */ + u16 reserved_8[1834]; /* 0x01ac */ + u16 videomem0[2048]; /* 0x1000 */ + u16 videomem1[2048]; /* 0x2000 */ +#else u16 reserved_6[889]; /* 0x010e */ - u16 videomem[31736]; /* 0x0800 */ + u16 videomem0[2048]; /* 0x0800 */ +#endif }; #endif @@ -254,9 +266,9 @@ struct ihs_fpga { u16 mc_rx_cmd_status; /* 0x0070 */ u16 mc_rx_data; /* 0x0072 */ u16 reserved_5[70]; /* 0x0074 */ - struct ihs_osd osd; /* 0x0100 */ + struct ihs_osd osd0; /* 0x0100 */ u16 reserved_6[889]; /* 0x010e */ - u16 videomem[31736]; /* 0x0800 */ + u16 videomem0[2048]; /* 0x0800 */ }; #endif @@ -275,9 +287,9 @@ struct ihs_fpga { u16 reserved_3[2]; /* 0x006c */ struct ihs_i2c i2c1; /* 0x0070 */ u16 reserved_4[194]; /* 0x007c */ - struct ihs_osd osd; /* 0x0200 */ + struct ihs_osd osd0; /* 0x0200 */ u16 reserved_5[761]; /* 0x020e */ - u16 videomem[31736]; /* 0x0800 */ + u16 videomem0[2048]; /* 0x0800 */ }; #endif