From patchwork Thu Oct 8 03:19:20 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bin Meng X-Patchwork-Id: 527565 X-Patchwork-Delegate: sjg@chromium.org Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id ED9D5140273 for ; Thu, 8 Oct 2015 14:18:54 +1100 (AEDT) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b=rIymBLt5; dkim-atps=neutral Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 48E0E4B8E3; Thu, 8 Oct 2015 05:18:04 +0200 (CEST) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id R1NvN-If7Qbv; Thu, 8 Oct 2015 05:18:04 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 4DA764B91E; Thu, 8 Oct 2015 05:17:42 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 64F374B693 for ; Thu, 8 Oct 2015 05:17:09 +0200 (CEST) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id nzjWT-pqZN4i for ; Thu, 8 Oct 2015 05:17:09 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-pa0-f47.google.com (mail-pa0-f47.google.com [209.85.220.47]) by theia.denx.de (Postfix) with ESMTPS id 24F384B8CA for ; Thu, 8 Oct 2015 05:16:58 +0200 (CEST) Received: by padhy16 with SMTP id hy16so40134276pad.1 for ; Wed, 07 Oct 2015 20:16:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:subject:date:message-id:in-reply-to:references; bh=69x/uXudKvU2UojU8FZ/IBkQyh4bZzKdF+r26T91zNQ=; b=rIymBLt53OAT4aP6qqi+tqYuAYpVMtcWu6Ok+fOQxXwwL+8cyhNM9G6MnPCMqQFbNJ jCsnDcfP5vjWcrp+XgwbZC2O7ef1l/dtAvGtRKIL5cxuK01oWJMi0tKiVXZGqFiUgXnJ TrAx+a2Obqup3bOqI+825fkBpPhlyTa0Pz9NHBQxHmCZk0/KvZsT540DVW9rYHMn9PlE HfEqsF3u1W6y7PeFgzt7k4HKVl8NpEBMNuJPHUiz/nv9X24JFi+KH1uJQTBnGB4kpdQq yYoI2iGuVUfTQrPZ7uPmewszz247uq9ikOPbyFKwdUfQ46ItHbPtX+5PQzLyzLZpnwBA xAKA== X-Received: by 10.66.164.132 with SMTP id yq4mr5332859pab.8.1444274216942; Wed, 07 Oct 2015 20:16:56 -0700 (PDT) Received: from ala-d2121-lx1.wrs.com (unknown-157-139.windriver.com. [147.11.157.139]) by smtp.gmail.com with ESMTPSA id fb1sm42284352pab.9.2015.10.07.20.16.56 (version=TLS1_1 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 07 Oct 2015 20:16:56 -0700 (PDT) From: Bin Meng To: Simon Glass , U-Boot Mailing List , Tom Rini , Hannes Schmelzer , Jian Luo , Miao Yan , Dean Armstrong Date: Wed, 7 Oct 2015 20:19:20 -0700 Message-Id: <1444274360-30189-13-git-send-email-bmeng.cn@gmail.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1444274360-30189-1-git-send-email-bmeng.cn@gmail.com> References: <1444274360-30189-1-git-send-email-bmeng.cn@gmail.com> Subject: [U-Boot] [PATCH v3 12/12] doc: Complement document about booting VxWorks X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" Current document about how to boot VxWorks is limited. Add several chapters in README.vxworks to document this. Signed-off-by: Bin Meng Reviewed-by: Tom Rini --- Changes in v3: None Changes in v2: - Describe typical values for bootaddr, e820data, e820info. doc/README.vxworks | 82 ++++++++++++++++++++++++++++++++++++++++++++++++------ doc/README.x86 | 2 ++ 2 files changed, 76 insertions(+), 8 deletions(-) diff --git a/doc/README.vxworks b/doc/README.vxworks index 4cb302e..3433e4f 100644 --- a/doc/README.vxworks +++ b/doc/README.vxworks @@ -1,19 +1,85 @@ -From VxWorks 6.9+ (not include 6.9), VxWorks starts adopting device tree as its hardware -decription mechansim (for PowerPC and ARM), thus requiring boot interface changes. +# +# Copyright (C) 2013, Miao Yan +# Copyright (C) 2015, Bin Meng +# +# SPDX-License-Identifier: GPL-2.0+ +# + +VxWorks Support +=============== + +This document describes the information about U-Boot loading VxWorks kernel. + +Status +------ +U-Boot supports loading VxWorks kernels via 'bootvx' and 'bootm' commands. +For booting old kernels (6.9.x) on PowerPC and ARM, and all kernel versions +on other architectures, 'bootvx' shall be used. For booting VxWorks 7 kernels +on PowerPC and ARM, 'bootm' shall be used. + +64-bit x86 kernel cannot be loaded as of today. + +VxWork 7 on PowerPC and ARM +--------------------------- +From VxWorks 7, VxWorks starts adopting device tree as its hardware decription +mechansim (for PowerPC and ARM), thus requiring boot interface changes. This section will describe the new interface. -For PowerPC, the calling convention of the new VxWorks entry point conforms to the ePAPR standard, -which is shown below (see ePAPR for more details): +For PowerPC, the calling convention of the new VxWorks entry point conforms to +the ePAPR standard, which is shown below (see ePAPR for more details): - void (*kernel_entry)(fdt_addr, - 0, 0, EPAPR_MAGIC, boot_IMA, 0, 0) + void (*kernel_entry)(fdt_addr, 0, 0, EPAPR_MAGIC, boot_IMA, 0, 0) For ARM, the calling convention is show below: void (*kernel_entry)(void *fdt_addr) -When booting new VxWorks kernel (uImage format), the parameters passed to bootm is like below: +When booting new VxWorks kernel (uImage format), the parameters passed to bootm +is like below: bootm - -The do_bootvx command still works as it was for older VxWorks kernels. +VxWorks bootline +---------------- +When using 'bootvx', the kernel bootline must be prepared by U-Boot at a +board-specific address before loading VxWorks. U-Boot supplies its address +via "bootaddr" environment variable. To check where the bootline should be +for a specific board, go to the VxWorks BSP for that board, and look for a +parameter called BOOT_LINE_ADRS. Assign its value to "bootaddr". A typical +value for "bootaddr" is 0x101200. + +If a "bootargs" variable is defined, its content will be copied to the memory +location pointed by "bootaddr" as the kernel bootline. If "bootargs" is not +there, command 'bootvx' can construct a valid bootline using the following +environments variables: bootdev, bootfile, ipaddr, netmask, serverip, +gatewayip, hostname, othbootargs. + +When using 'bootm', just define "bootargs" in the environment and U-Boot will +handle bootline fix up for the kernel dtb automatically. + +Serial console +-------------- +It's very common that VxWorks BSPs configure a different baud rate for the +serial console from what is being used by U-Boot. For example, VxWorks tends +to use 9600 as the default baud rate on all x86 BSPs while U-Boot uses 115200. +Please configure both U-Boot and VxWorks to use the same baud rate, or it may +look like VxWorks hangs somewhere as nothing outputs on the serial console. + +x86-specific information +------------------------ +Before loading an x86 kernel, two additional environment variables need to be +provided. They are "e820data" and "e820info", which represent the address of +E820 table and E820 information (defined by VxWorks) in system memory. + +Check VxWorks kernel configuration to look for BIOS_E820_DATA_START and +BIOS_E820_INFO_START, and assign their values to "e820data" and "e820info" +accordingly. If neither of these two are supplied, U-Boot assumes a default +location at 0x4000 for "e820data" and 0x4a00 for "e820info". Typical values +for "e820data" and "e820info" are 0x104000 and 0x104a00. But there is one +exception on Intel Galileo, where "e820data" and "e820info" should be left +unset, which assume the default location for VxWorks. + +Note since currently U-Boot does not support ACPI yet, VxWorks kernel must +be configured to use MP table and virtual wire interrupt mode. This requires +INCLUDE_MPTABLE_BOOT_OP and INCLUDE_VIRTUAL_WIRE_MODE to be included in a +VxWorks kernel configuration. diff --git a/doc/README.x86 b/doc/README.x86 index 6cf293b..a4f5321 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -25,6 +25,8 @@ targets and all Intel boards support running U-Boot 'bare metal'. As for loading an OS, U-Boot supports directly booting a 32-bit or 64-bit Linux kernel as part of a FIT image. It also supports a compressed zImage. +U-Boot supports loading an x86 VxWorks kernel. Please check README.vxworks +for more details. Build Instructions for U-Boot as coreboot payload -------------------------------------------------