diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 1922045..d05f943 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8548CDS
-	bool "Support MPC8548CDS"
-
 config TARGET_MPC8555CDS
 	bool "Support MPC8555CDS"
 
@@ -145,7 +142,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8548cds/Kconfig"
 source "board/freescale/mpc8555cds/Kconfig"
 source "board/freescale/mpc8560ads/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
diff --git a/board/freescale/mpc8548cds/Kconfig b/board/freescale/mpc8548cds/Kconfig
deleted file mode 100644
index 09f3b0b..0000000
--- a/board/freescale/mpc8548cds/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8548CDS
-
-config SYS_BOARD
-	default "mpc8548cds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8548CDS"
-
-endif
diff --git a/board/freescale/mpc8548cds/MAINTAINERS b/board/freescale/mpc8548cds/MAINTAINERS
deleted file mode 100644
index 6f22922..0000000
--- a/board/freescale/mpc8548cds/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-MPC8548CDS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc8548cds/
-F:	include/configs/MPC8548CDS.h
-F:	configs/MPC8548CDS_defconfig
-F:	configs/MPC8548CDS_36BIT_defconfig
-F:	configs/MPC8548CDS_legacy_defconfig
diff --git a/board/freescale/mpc8548cds/Makefile b/board/freescale/mpc8548cds/Makefile
deleted file mode 100644
index f797df2..0000000
--- a/board/freescale/mpc8548cds/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8548cds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c
deleted file mode 100644
index b31ea34..0000000
--- a/board/freescale/mpc8548cds/ddr.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
-
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c
deleted file mode 100644
index 5578fc2..0000000
--- a/board/freescale/mpc8548cds/law.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2008,2010-2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	/* LBC window - maps 256M */
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
deleted file mode 100644
index ca9b43c..0000000
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Copyright 2004, 2007, 2009-2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <tsec.h>
-#include <fsl_mdio.h>
-#include <netdev.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-void local_bus_init(void);
-
-int checkboard (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	puts("Board: MPC8548CDS");
-	printf(" Carrier Rev: 0x%02x, PCI Slot %d\n",
-			get_board_version(), pci_slot);
-	printf("       Daughtercard Rev: %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	/*
-	 * Hack TSEC 3 and 4 IO voltages.
-	 */
-	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
-
-	ecm->eedr = 0xffffffff;		/* clear ecm errors */
-	ecm->eeer = 0xffffffff;		/* enable ecm errors */
-	return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
-	uint clkdiv;
-	sys_info_t sysinfo;
-
-	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
-
-	gur->lbiuiplldcr1 = 0x00078080;
-	if (clkdiv == 16) {
-		gur->lbiuiplldcr0 = 0x7c0f1bf0;
-	} else if (clkdiv == 8) {
-		gur->lbiuiplldcr0 = 0x6c0f1bf0;
-	} else if (clkdiv == 4) {
-		gur->lbiuiplldcr0 = 0x5c0f1bf0;
-	}
-
-	lbc->lcrr |= 0x00030000;
-
-	asm("sync;isync;msync");
-
-	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
-	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void lbc_sdram_init(void)
-{
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
-
-	uint idx;
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
-	uint lsdmr_common;
-
-	puts("LBC SDRAM: ");
-	print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
-		   "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
-	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * MPC8548 uses "new" 15-16 style addressing.
-	 */
-	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
-	lsdmr_common |= LSDMR_BSMA1516;
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
-		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
-		mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
-		mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
-		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
-		mpc85xx_config_via_ac97, {0,0,0}},
-	{},
-};
-
-static struct pci_controller pci1_hose;
-#endif	/* CONFIG_PCI */
-
-void pci_init_board(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	struct fsl_pci_info pci_info;
-	u32 devdisr, pordevsr, io_sel;
-	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
-	int first_free_busno = 0;
-	char buf[32];
-
-	devdisr = in_be32(&gur->devdisr);
-	pordevsr = in_be32(&gur->pordevsr);
-	porpllsr = in_be32(&gur->porpllsr);
-	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-
-	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
-
-#ifdef CONFIG_PCI1
-	pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-	pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
-	pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
-	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
-
-	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-		SET_STD_PCI_INFO(pci_info, 1);
-		set_next_law(pci_info.mem_phys,
-			law_size_bits(pci_info.mem_size), pci_info.law);
-		set_next_law(pci_info.io_phys,
-			law_size_bits(pci_info.io_size), pci_info.law);
-
-		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
-		printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
-			(pci_32) ? 32 : 64,
-			strmhz(buf, pci_speed),
-			pci_clk_sel ? "sync" : "async",
-			pci_agent ? "agent" : "host",
-			pci_arb ? "arbiter" : "external-arbiter",
-			pci_info.regs);
-
-		pci1_hose.config_table = pci_mpc85xxcds_config_table;
-		first_free_busno = fsl_pci_init_port(&pci_info,
-					&pci1_hose, first_free_busno);
-
-#ifdef CONFIG_PCIX_CHECK
-		if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
-			/* PCI-X init */
-			if (CONFIG_SYS_CLK_FREQ < 66000000)
-				printf("PCI-X will only work at 66 MHz\n");
-
-			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
-				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
-			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
-		}
-#endif
-	} else {
-		printf("PCI1: disabled\n");
-	}
-
-	puts("\n");
-#else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
-#endif
-
-#ifdef CONFIG_PCI2
-{
-	uint pci2_clk_sel = porpllsr & 0x4000;	/* PORPLLSR[17] */
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	if (pci_dual) {
-		printf("PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf("PCI2: disabled\n");
-	}
-}
-#else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
-#endif /* CONFIG_PCI2 */
-
-	fsl_pcie_init_board(first_free_busno);
-}
-
-void configure_rgmii(void)
-{
-	unsigned short temp;
-
-	/* Change the resistors for the PHY */
-	/* This is needed to get the RGMII working for the 1.3+
-	 * CDS cards */
-	if (get_board_version() ==  0x13) {
-		miiphy_write(DEFAULT_MII_NAME,
-				TSEC1_PHY_ADDR, 29, 18);
-
-		miiphy_read(DEFAULT_MII_NAME,
-				TSEC1_PHY_ADDR, 30, &temp);
-
-		temp = (temp & 0xf03f);
-		temp |= 2 << 9;		/* 36 ohm */
-		temp |= 2 << 6;		/* 39 ohm */
-
-		miiphy_write(DEFAULT_MII_NAME,
-				TSEC1_PHY_ADDR, 30, temp);
-
-		miiphy_write(DEFAULT_MII_NAME,
-				TSEC1_PHY_ADDR, 29, 3);
-
-		miiphy_write(DEFAULT_MII_NAME,
-				TSEC1_PHY_ADDR, 30, 0x8000);
-	}
-
-	return;
-}
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	/* initialize TSEC3 only if Carrier is 1.3 or above on CDS */
-	if (get_board_version() >= 0x13) {
-		SET_STD_TSEC_INFO(tsec_info[num], 3);
-		tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
-		num++;
-	}
-#endif
-#ifdef CONFIG_TSEC4
-	/* initialize TSEC4 only if Carrier is 1.3 or above on CDS */
-	if (get_board_version() >= 0x13) {
-		SET_STD_TSEC_INFO(tsec_info[num], 4);
-		tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
-		num++;
-	}
-#endif
-
-	if (!num) {
-		printf("No TSECs initialized\n");
-
-		return 0;
-	}
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-	configure_rgmii();
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c
deleted file mode 100644
index 363e043..0000000
--- a/board/freescale/mpc8548cds/tlb.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright 2008, 2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/*
-	 * Entry 0:
-	 * FLASH(cover boot page)	16M	Non-cacheable, guarded
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_16M, 1),
-
-	/*
-	 * Entry 1:
-	 * CCSRBAR	1M	Non-cacheable, guarded
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1M, 1),
-
-	/*
-	 * Entry 2:
-	 * LBC SDRAM	64M	Cacheable, non-guarded
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE,
-		      CONFIG_SYS_LBC_SDRAM_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 2, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * Entry 3:
-	 * CADMUS registers	1M	Non-cacheable, guarded
-	 */
-	SET_TLB_ENTRY(1, CADMUS_BASE_ADDR, CADMUS_BASE_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1M, 1),
-
-	/*
-	 * Entry 4:
-	 * PCI and PCIe MEM	1G	Non-cacheable, guarded
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_1G, 1),
-
-	/*
-	 * Entry 5:
-	 * PCI1 IO	1M	Non-cacheable, guarded
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_VIRT, CONFIG_SYS_PCI1_IO_PHYS,
-		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_1M, 1),
-
-	/*
-	 * Entry 6:
-	 * PCIe IO	1M	Non-cacheable, guarded
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_1M, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig
deleted file mode 100644
index dfe1fca..0000000
--- a/configs/MPC8548CDS_36BIT_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8548CDS=y
-CONFIG_SYS_EXTRA_OPTIONS="36BIT"
diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig
deleted file mode 100644
index ba52e94..0000000
--- a/configs/MPC8548CDS_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8548CDS=y
diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig
deleted file mode 100644
index 69c44af..0000000
--- a/configs/MPC8548CDS_legacy_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8548CDS=y
-CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
deleted file mode 100644
index a80221a..0000000
--- a/include/configs/MPC8548CDS.h
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * mpc8548cds board configuration file
- *
- * Please refer to doc/README.mpc85xxcds for more info.
- *
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE */
-#define CONFIG_E500		1	/* BOOKE e500 family */
-#define CONFIG_MPC8548		1	/* MPC8548 specific */
-#define CONFIG_MPC8548CDS	1	/* MPC8548CDS board specific */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xfff80000
-#endif
-
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1			/* SRIO port 1 */
-
-#define CONFIG_PCI		/* enable any pci type devices */
-#define CONFIG_PCI1		/* PCI controller 1 */
-#define CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
-#undef CONFIG_PCI2
-#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
-#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-#define CONFIG_FSL_VIA
-
-#ifndef __ASSEMBLY__
-extern unsigned long get_clock_freq(void);
-#endif
-#define CONFIG_SYS_CLK_FREQ	get_clock_freq() /* sysclk for MPC85xx */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* toggle branch predition */
-
-/*
- * Only possible on E500 Version 2 or newer cores.
- */
-#define CONFIG_ENABLE_36BIT_PHYS	1
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-#endif
-
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-#define CONFIG_SYS_CCSRBAR		0xe0000000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-/* DDR Setup */
-#define CONFIG_SYS_FSL_DDR2
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_SPD
-
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
-
-/* Make sure required options are set */
-#ifndef CONFIG_SPD_EEPROM
-#error ("CONFIG_SPD_EEPROM is required")
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ
-/*
- * Physical Address Map
- *
- * 32bit:
- * 0x0000_0000	0x7fff_ffff	DDR			2G	cacheable
- * 0x8000_0000	0x9fff_ffff	PCI1 MEM		512M	cacheable
- * 0xa000_0000	0xbfff_ffff	PCIe MEM		512M	cacheable
- * 0xc000_0000	0xdfff_ffff	RapidIO			512M	cacheable
- * 0xe000_0000	0xe00f_ffff	CCSR			1M	non-cacheable
- * 0xe200_0000	0xe20f_ffff	PCI1 IO			1M	non-cacheable
- * 0xe300_0000	0xe30f_ffff	PCIe IO			1M	non-cacheable
- * 0xf000_0000	0xf3ff_ffff	SDRAM			64M	cacheable
- * 0xf800_0000	0xf80f_ffff	NVRAM/CADMUS		1M	non-cacheable
- * 0xff00_0000	0xff7f_ffff	FLASH (2nd bank)	8M	non-cacheable
- * 0xff80_0000	0xffff_ffff	FLASH (boot bank)	8M	non-cacheable
- *
- * 36bit:
- * 0x00000_0000	0x07fff_ffff	DDR			2G	cacheable
- * 0xc0000_0000	0xc1fff_ffff	PCI1 MEM		512M	cacheable
- * 0xc2000_0000	0xc3fff_ffff	PCIe MEM		512M	cacheable
- * 0xc4000_0000	0xc5fff_ffff	RapidIO			512M	cacheable
- * 0xfe000_0000	0xfe00f_ffff	CCSR			1M	non-cacheable
- * 0xfe200_0000	0xfe20f_ffff	PCI1 IO			1M	non-cacheable
- * 0xfe300_0000	0xfe30f_ffff	PCIe IO			1M	non-cacheable
- * 0xff000_0000	0xff3ff_ffff	SDRAM			64M	cacheable
- * 0xff800_0000	0xff80f_ffff	NVRAM/CADMUS		1M	non-cacheable
- * 0xfff00_0000	0xfff7f_ffff	FLASH (2nd bank)	8M	non-cacheable
- * 0xfff80_0000	0xfffff_ffff	FLASH (boot bank)	8M	non-cacheable
- *
- */
-
-
-/*
- * Local Bus Definitions
- */
-
-/*
- * FLASH on the Local Bus
- * Two banks, 8M each, using the CFI driver.
- * Boot from BR0/OR0 bank at 0xff00_0000
- * Alternate BR1/OR1 bank at 0xff80_0000
- *
- * BR0, BR1:
- *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
- *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
- *    Port Size = 16 bits = BRx[19:20] = 10
- *    Use GPCM = BRx[24:26] = 000
- *    Valid = BRx[31] = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001	 BR0
- * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001	 BR1
- *
- * OR0, OR1:
- *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
- *    Reserved ORx[17:18] = 11, confusion here?
- *    CSNT = ORx[20] = 1
- *    ACS = half cycle delay = ORx[21:22] = 11
- *    SCY = 6 = ORx[24:27] = 0110
- *    TRLX = use relaxed timing = ORx[29] = 1
- *    EAD = use external address latch delay = OR[31] = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65	 ORx
- */
-
-#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 16M */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS	0xfff000000ull
-#else
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-#endif
-
-#define CONFIG_SYS_BR0_PRELIM \
-	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V)
-#define CONFIG_SYS_BR1_PRELIM \
-	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
-
-#define	CONFIG_SYS_OR0_PRELIM		0xff806e65
-#define	CONFIG_SYS_OR1_PRELIM		0xff806e65
-
-#define CONFIG_SYS_FLASH_BANKS_LIST \
-	{CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_HWCONFIG			/* enable hwconfig */
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS	0xff0000000ull
-#else
-#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS	CONFIG_SYS_LBC_SDRAM_BASE
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
-
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
- *
- * For BR2, need:
- *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
- *    port-size = 32-bits = BR2[19:20] = 11
- *    no parity checking = BR2[21:22] = 00
- *    SDRAM for MSEL = BR2[24:26] = 011
- *    Valid = BR[31] = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
- *
- * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
- * FIXME: the top 17 bits of BR2.
- */
-
-#define CONFIG_SYS_BR2_PRELIM \
-	(BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \
-	| BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V)
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- *    64MB mask for AM, OR2[0:7] = 1111 1100
- *		   XAM, OR2[17:18] = 11
- *    9 columns OR2[19-21] = 010
- *    13 rows	OR2[23-25] = 100
- *    EAD set for extra time OR[31] = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
- */
-
-#define CONFIG_SYS_OR2_PRELIM		0xfc006901
-
-#define CONFIG_SYS_LBC_LCRR		0x00030004	/* LB clock ratio reg */
-#define CONFIG_SYS_LBC_LBCR		0x00000000	/* LB config reg */
-#define CONFIG_SYS_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
-#define CONFIG_SYS_LBC_MRTPR		0x00000000	/* LB refresh timer prescal*/
-
-/*
- * Common settings for all Local Bus SDRAM commands.
- * At run time, either BSMA1516 (for CPU 1.1)
- *		    or BSMA1617 (for CPU 1.0) (old)
- * is OR'ed in too.
- */
-#define CONFIG_SYS_LBC_LSDMR_COMMON	( LSDMR_RFCR16		\
-				| LSDMR_PRETOACT7	\
-				| LSDMR_ACTTORW7	\
-				| LSDMR_BL8		\
-				| LSDMR_WRC4		\
-				| LSDMR_CL3		\
-				| LSDMR_RFEN		\
-				)
-
-/*
- * The CADMUS registers are connected to CS3 on CDS.
- * The new memory map places CADMUS at 0xf8000000.
- *
- * For BR3, need:
- *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
- *    port-size = 8-bits  = BR[19:20] = 01
- *    no parity checking  = BR[21:22] = 00
- *    GPMC for MSEL	  = BR[24:26] = 000
- *    Valid		  = BR[31]    = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
- *
- * For OR3, need:
- *    1 MB mask for AM,	  OR[0:16]  = 1111 1111 1111 0000 0
- *    disable buffer ctrl OR[19]    = 0
- *    CSNT		  OR[20]    = 1
- *    ACS		  OR[21:22] = 11
- *    XACS		  OR[23]    = 1
- *    SCY 15 wait states  OR[24:27] = 1111	max is suboptimal but safe
- *    SETA		  OR[28]    = 0
- *    TRLX		  OR[29]    = 1
- *    EHTR		  OR[30]    = 1
- *    EAD extra time	  OR[31]    = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
- */
-
-#define CONFIG_FSL_CADMUS
-
-#define CADMUS_BASE_ADDR 0xf8000000
-#ifdef CONFIG_PHYS_64BIT
-#define CADMUS_BASE_ADDR_PHYS	0xff8000000ull
-#else
-#define CADMUS_BASE_ADDR_PHYS	CADMUS_BASE_ADDR
-#endif
-#define CONFIG_SYS_BR3_PRELIM \
-	(BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR3_PRELIM	 0xfff00ff7
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)	/* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX	2
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/* EEPROM */
-#define CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_CCID
-#define CONFIG_SYS_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_MEM_BUS		0xe0000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	0xc00000000ull
-#else
-#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
-#endif
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
-#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull
-#else
-#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
-#endif
-#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-#ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_NAME		"Slot"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0xa0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc20000000ull
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xa0000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xe3000000
-#define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_IO_PHYS        0xfe3000000ull
-#else
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
-#endif
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
-#endif
-
-/*
- * RapidIO MMU
- */
-#define CONFIG_SYS_SRIO1_MEM_VIRT	0xc0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc40000000ull
-#else
-#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc0000000
-#endif
-#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 512M */
-
-#ifdef CONFIG_LEGACY
-#define BRIDGE_ID 17
-#define VIA_ID 2
-#else
-#define BRIDGE_ID 28
-#define VIA_ID 4
-#endif
-
-#if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-#define CONFIG_E1000			/* Define e1000 pci Ethernet card */
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#endif	/* CONFIG_PCI */
-
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_MII		1	/* MII PHY management */
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"eTSEC0"
-#define CONFIG_TSEC2	1
-#define CONFIG_TSEC2_NAME	"eTSEC1"
-#define CONFIG_TSEC3	1
-#define CONFIG_TSEC3_NAME	"eTSEC2"
-#define CONFIG_TSEC4
-#define CONFIG_TSEC4_NAME	"eTSEC3"
-#undef CONFIG_MPC85XX_FEC
-
-#define CONFIG_PHY_MARVELL
-
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC3_PHY_ADDR		2
-#define TSEC4_PHY_ADDR		3
-
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-#define TSEC4_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-
-/* Options are: eTSEC[0-3] */
-#define CONFIG_ETHPRIME		"eTSEC0"
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-#define CONFIG_ENV_ADDR	0xfff80000
-#else
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#endif
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K for env */
-#define CONFIG_ENV_SIZE		0x2000
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#endif
-
-#define CONFIG_IPADDR	 192.168.1.253
-
-#define CONFIG_HOSTNAME	 unknown
-#define CONFIG_ROOTPATH	 "/nfsroot"
-#define CONFIG_BOOTFILE "8548cds/uImage.uboot"
-#define CONFIG_UBOOTPATH	8548cds/u-boot.bin	/* TFTP server */
-
-#define CONFIG_SERVERIP	 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK	 255.255.255.0
-
-#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
-
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
-#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
-
-#define CONFIG_BAUDRATE	115200
-
-#define	CONFIG_EXTRA_ENV_SETTINGS		\
-	"hwconfig=fsl_ddr:ecc=off\0"		\
-	"netdev=eth0\0"				\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"	\
-	"tftpflash=tftpboot $loadaddr $uboot; "	\
-		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" +$filesize; "	\
-		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize; "	\
-		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize\0"	\
-	"consoledev=ttyS1\0"			\
-	"ramdiskaddr=2000000\0"			\
-	"ramdiskfile=ramdisk.uboot\0"		\
-	"fdtaddr=c00000\0"			\
-	"fdtfile=mpc8548cds.dtb\0"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-   "setenv bootargs root=/dev/nfs rw "					\
-      "nfsroot=$serverip:$rootpath "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr - $fdtaddr"
-
-
-#define CONFIG_RAMBOOTCOMMAND \
-   "setenv bootargs root=/dev/ram rw "					\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $ramdiskaddr $ramdiskfile;"					\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
-
-#endif	/* __CONFIG_H */
