@@ -10,3 +10,12 @@
obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
fpga_manager.o scan_manager.o
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+
+# QTS-generated config file wrappers
+obj-y += wrap_pll_config.o
+obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
+ wrap_sdram_config.o
+CFLAGS_wrap_iocsr_config.o += -I$(srctree)/board/$(BOARDDIR)
+CFLAGS_wrap_pinmux_config.o += -I$(srctree)/board/$(BOARDDIR)
+CFLAGS_wrap_pll_config.o += -I$(srctree)/board/$(BOARDDIR)
+CFLAGS_wrap_sdram_config.o += -I$(srctree)/board/$(BOARDDIR)
similarity index 96%
rename from board/altera/socfpga/wrap_iocsr_config.c
rename to arch/arm/mach-socfpga/wrap_iocsr_config.c
@@ -10,7 +10,7 @@
/*
* Yes, dear reader, we're including a C file here, this is no mistake :-)
*/
-#include "qts/iocsr_config.c"
+#include <qts/iocsr_config.c>
int iocsr_get_config_table(const unsigned int chain_id,
const unsigned long **table,
similarity index 97%
rename from board/altera/socfpga/wrap_pinmux_config.c
rename to arch/arm/mach-socfpga/wrap_pinmux_config.c
@@ -25,7 +25,7 @@
*/
#define _PRELOADER_PINMUX_CONFIG_H_
#define CONFIG_HPS_PINMUX_NUM
-#include "qts/pinmux_config.c"
+#include <qts/pinmux_config.c>
void sysmgr_get_pinmux_table(const unsigned long **table,
unsigned int *table_len)
similarity index 99%
rename from board/altera/socfpga/wrap_pll_config.c
rename to arch/arm/mach-socfpga/wrap_pll_config.c
@@ -6,7 +6,7 @@
#include <common.h>
#include <asm/arch/clock_manager.h>
-#include "qts/pll_config.h"
+#include <qts/pll_config.h>
#define MAIN_VCO_BASE ( \
(CONFIG_HPS_MAINPLLGRP_VCO_DENOM << \
similarity index 98%
rename from board/altera/socfpga/wrap_sdram_config.c
rename to arch/arm/mach-socfpga/wrap_sdram_config.c
@@ -8,12 +8,12 @@
#include <errno.h>
#include <asm/arch/sdram.h>
/* QTS output file. */
-#include "qts/sdram_config.h"
+#include <qts/sdram_config.h>
-#include "qts/sequencer_auto_ac_init.h"
-#include "qts/sequencer_auto_inst_init.h"
-#include "qts/sequencer_auto.h"
-#include "qts/sequencer_defines.h"
+#include <qts/sequencer_auto_ac_init.h>
+#include <qts/sequencer_auto_inst_init.h>
+#include <qts/sequencer_auto.h>
+#include <qts/sequencer_defines.h>
static const struct socfpga_sdram_config sdram_config = {
.ctrl_cfg =
@@ -6,6 +6,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := socfpga.o wrap_pll_config.o
-obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
- wrap_sdram_config.o
+obj-y := socfpga.o
Move the wrappers for QTS-generated files into platform directory out of the board directory. The trick here is to add -I to CFLAGS such that it points to the board directory in source tree and thus the qts/ directory there is still reachable. Signed-off-by: Marek Vasut <marex@denx.de> --- arch/arm/mach-socfpga/Makefile | 9 +++++++++ .../socfpga => arch/arm/mach-socfpga}/wrap_iocsr_config.c | 2 +- .../socfpga => arch/arm/mach-socfpga}/wrap_pinmux_config.c | 2 +- .../altera/socfpga => arch/arm/mach-socfpga}/wrap_pll_config.c | 2 +- .../socfpga => arch/arm/mach-socfpga}/wrap_sdram_config.c | 10 +++++----- board/altera/socfpga/Makefile | 4 +--- 6 files changed, 18 insertions(+), 11 deletions(-) rename {board/altera/socfpga => arch/arm/mach-socfpga}/wrap_iocsr_config.c (96%) rename {board/altera/socfpga => arch/arm/mach-socfpga}/wrap_pinmux_config.c (97%) rename {board/altera/socfpga => arch/arm/mach-socfpga}/wrap_pll_config.c (99%) rename {board/altera/socfpga => arch/arm/mach-socfpga}/wrap_sdram_config.c (98%)