| Message ID | 1438277636-20931-1-git-send-email-mamlinav@gmail.com |
|---|---|
| State | Accepted |
| Delegated to: | Hans de Goede |
| Headers | show |
Hi Aleksei, On 30-07-15 19:33, Aleksei Mamlin wrote: > Enable the otg/drc usb controller on the Wexler TAB7200 tablet. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> There are some other u-boot USB patches pending which change how to enable the MUSB controller in the defconfig. So I'm going to hold of with merging this until those are merged. Once those are merged I'll adjust your patch to the new Kconfig options to use and then merge it. Regards, Hans > --- > configs/Wexler_TAB7200_defconfig | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig > index eadceb2..55e1b6b 100644 > --- a/configs/Wexler_TAB7200_defconfig > +++ b/configs/Wexler_TAB7200_defconfig > @@ -2,10 +2,15 @@ CONFIG_ARM=y > CONFIG_ARCH_SUNXI=y > CONFIG_MACH_SUN7I=y > CONFIG_DRAM_CLK=384 > +CONFIG_USB0_VBUS_PIN="PB9" > +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" > +CONFIG_USB0_ID_DET="PH4" > +CONFIG_AXP_GPIO=y > CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:210,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0" > CONFIG_VIDEO_LCD_POWER="PH8" > CONFIG_VIDEO_LCD_BL_EN="PH7" > CONFIG_VIDEO_LCD_BL_PWM="PB2" > +CONFIG_USB_MUSB_SUNXI=y > CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > CONFIG_SPL=y >
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index eadceb2..55e1b6b 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -2,10 +2,15 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH4" +CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:210,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y
Enable the otg/drc usb controller on the Wexler TAB7200 tablet. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- configs/Wexler_TAB7200_defconfig | 5 +++++ 1 file changed, 5 insertions(+)