mbox

[U-Boot] Pull request: u-boot-spi/master

Message ID 1435999295-6641-1-git-send-email-jteki@openedev.com
State Accepted
Delegated to: Tom Rini
Headers show

Pull-request

git://git.denx.de/u-boot-spi.git master

Message

Jagan Teki July 4, 2015, 8:41 a.m. UTC 
Hi Tom,

Please pull this PR.

thanks!
Jagan.

The following changes since commit 891b487098ee2169a16b1bbb354aaef28aa90630:

  Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-07-01 15:38:12 -0400)

are available in the git repository at:


  git://git.denx.de/u-boot-spi.git master

for you to fetch changes up to 8097cba809d8c40d8fe72f792c7dc0644c845a32:

  spi: cadence_qspi: add device tree binding doc (2015-07-03 13:50:53 +0530)

----------------------------------------------------------------
Vikas Manocha (10):
      stv0991: enable saving enrironment in spi flash
      stv0991: move OF_CONTROL config to defconfig
      stv0991: remove define CONFIG_OF_SEPARATE from board file
      stv0991: configure clock & pad muxing for qspi
      stv0991: enable cadence qspi controller & spi flash
      stv0991: configure device tree for cadence qspi & flash
      spi: cadence_qspi: move the sram partition in init
      spi: cadence_qspi: get sram size from device tree
      spi: cadence_qspi: support FIFO width other than 4 bytes
      spi: cadence_qspi: add device tree binding doc

 arch/arm/Kconfig                                   |  3 ++
 arch/arm/cpu/armv7/stv0991/clock.c                 |  4 +-
 arch/arm/cpu/armv7/stv0991/pinmux.c                |  5 ++
 arch/arm/dts/socfpga.dtsi                          |  1 +
 arch/arm/dts/stv0991.dts                           | 30 +++++++++++
 arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    | 15 ++++++
 arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |  9 ++++
 arch/arm/include/asm/arch-stv0991/stv0991_periph.h |  2 +
 board/st/stv0991/stv0991.c                         |  8 +++
 configs/stv0991_defconfig                          |  2 +-
 doc/device-tree-bindings/spi/spi-cadence.txt       | 28 ++++++++++
 drivers/spi/cadence_qspi.c                         |  1 +
 drivers/spi/cadence_qspi.h                         |  1 +
 drivers/spi/cadence_qspi_apb.c                     | 62 +++++++++-------------
 include/configs/stv0991.h                          | 21 ++++++--
 15 files changed, 151 insertions(+), 41 deletions(-)
 create mode 100644 doc/device-tree-bindings/spi/spi-cadence.txt

Comments

Tom Rini July 4, 2015, 11:42 a.m. UTC | #1 
On Sat, Jul 04, 2015 at 02:11:35PM +0530, Jagan Teki wrote:
> Hi Tom,
> 
> Please pull this PR.
> 
> thanks!
> Jagan.
> 
> The following changes since commit 891b487098ee2169a16b1bbb354aaef28aa90630:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-07-01 15:38:12 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://git.denx.de/u-boot-spi.git master
> 
> for you to fetch changes up to 8097cba809d8c40d8fe72f792c7dc0644c845a32:
> 
>   spi: cadence_qspi: add device tree binding doc (2015-07-03 13:50:53 +0530)
> 
> ----------------------------------------------------------------
> Vikas Manocha (10):
>       stv0991: enable saving enrironment in spi flash
>       stv0991: move OF_CONTROL config to defconfig
>       stv0991: remove define CONFIG_OF_SEPARATE from board file
>       stv0991: configure clock & pad muxing for qspi
>       stv0991: enable cadence qspi controller & spi flash
>       stv0991: configure device tree for cadence qspi & flash
>       spi: cadence_qspi: move the sram partition in init
>       spi: cadence_qspi: get sram size from device tree
>       spi: cadence_qspi: support FIFO width other than 4 bytes
>       spi: cadence_qspi: add device tree binding doc

Given the planned release on the 13th, is any of this stuff that can't
wait?  Thanks!
Jagan Teki July 7, 2015, 3:26 p.m. UTC | #2 
On 4 July 2015 at 17:12, Tom Rini <trini@konsulko.com> wrote:
> On Sat, Jul 04, 2015 at 02:11:35PM +0530, Jagan Teki wrote:
>> Hi Tom,
>>
>> Please pull this PR.
>>
>> thanks!
>> Jagan.
>>
>> The following changes since commit 891b487098ee2169a16b1bbb354aaef28aa90630:
>>
>>   Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-07-01 15:38:12 -0400)
>>
>> are available in the git repository at:
>>
>>
>>   git://git.denx.de/u-boot-spi.git master
>>
>> for you to fetch changes up to 8097cba809d8c40d8fe72f792c7dc0644c845a32:
>>
>>   spi: cadence_qspi: add device tree binding doc (2015-07-03 13:50:53 +0530)
>>
>> ----------------------------------------------------------------
>> Vikas Manocha (10):
>>       stv0991: enable saving enrironment in spi flash
>>       stv0991: move OF_CONTROL config to defconfig
>>       stv0991: remove define CONFIG_OF_SEPARATE from board file
>>       stv0991: configure clock & pad muxing for qspi
>>       stv0991: enable cadence qspi controller & spi flash
>>       stv0991: configure device tree for cadence qspi & flash
>>       spi: cadence_qspi: move the sram partition in init
>>       spi: cadence_qspi: get sram size from device tree
>>       spi: cadence_qspi: support FIFO width other than 4 bytes
>>       spi: cadence_qspi: add device tree binding doc
>
> Given the planned release on the 13th, is any of this stuff that can't
> wait?  Thanks!

No issues, May be you can apply once tag done.

thanks!
Tom Rini July 14, 2015, 10:12 p.m. UTC | #3 
On Sat, Jul 04, 2015 at 02:11:35PM +0530, Jagan Teki wrote:

> Hi Tom,
> 
> Please pull this PR.
> 
> thanks!
> Jagan.
> 
> The following changes since commit 891b487098ee2169a16b1bbb354aaef28aa90630:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-07-01 15:38:12 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://git.denx.de/u-boot-spi.git master
> 
> for you to fetch changes up to 8097cba809d8c40d8fe72f792c7dc0644c845a32:
> 
>   spi: cadence_qspi: add device tree binding doc (2015-07-03 13:50:53 +0530)
> 

Applied to u-boot/master, thanks!