diff mbox

[U-Boot,U-Boot,v2,13/17] dts: zynq: Enable spi1 for zc770_xm010 board

Message ID 1431270957-6901-14-git-send-email-jteki@openedev.com
State Superseded
Delegated to: Jagannadha Sutradharudu Teki
Headers show

Commit Message

Jagan Teki May 10, 2015, 3:15 p.m. UTC 
This patch enables spi1 for zynq zc770_xm010 board dts.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
---
 arch/arm/dts/zynq-zc770-xm010.dts | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Jagan Teki June 16, 2015, 11:28 a.m. UTC | #1 
Hi Michal,

On 10 May 2015 at 20:45, Jagan Teki <jteki@openedev.com> wrote:
> This patch enables spi1 for zynq zc770_xm010 board dts.
>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> Acked-by: Simon Glass <sjg@chromium.org>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
> ---
>  arch/arm/dts/zynq-zc770-xm010.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
> index 5e66174..e793a61 100644
> --- a/arch/arm/dts/zynq-zc770-xm010.dts
> +++ b/arch/arm/dts/zynq-zc770-xm010.dts
> @@ -21,3 +21,7 @@
>                 reg = <0 0x40000000>;
>         };
>  };
> +
> +&spi1 {
> +       status = "okay";
> +};

Did you find this, its not working with this type enabling in board
dts instead it works only with
aliases {
                serial0 = &uart1;
                spi1 = "/spi@e0007000";
        };

thanks!
Michal Simek June 16, 2015, 1:34 p.m. UTC | #2 
On 06/16/2015 01:28 PM, Jagan Teki wrote:
> Hi Michal,
> 
> On 10 May 2015 at 20:45, Jagan Teki <jteki@openedev.com> wrote:
>> This patch enables spi1 for zynq zc770_xm010 board dts.
>>
>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>> Acked-by: Simon Glass <sjg@chromium.org>
>> Cc: Michal Simek <michal.simek@xilinx.com>
>> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
>> ---
>>  arch/arm/dts/zynq-zc770-xm010.dts | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
>> index 5e66174..e793a61 100644
>> --- a/arch/arm/dts/zynq-zc770-xm010.dts
>> +++ b/arch/arm/dts/zynq-zc770-xm010.dts
>> @@ -21,3 +21,7 @@
>>                 reg = <0 0x40000000>;
>>         };
>>  };
>> +
>> +&spi1 {
>> +       status = "okay";
>> +};
> 
> Did you find this, its not working with this type enabling in board
> dts instead it works only with
> aliases {
>                 serial0 = &uart1;
>                 spi1 = "/spi@e0007000";
>         };

Sorry I haven't had any time to test this but if you want to use aliases
please use &spi1 which does better job.

Thanks,
Michal
diff mbox

Patch

diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index 5e66174..e793a61 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -21,3 +21,7 @@ 
 		reg = <0 0x40000000>;
 	};
 };
+
+&spi1 {
+	status = "okay";
+};