From patchwork Sat Apr 4 11:27:05 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 458146 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id E544314012C for ; Sat, 4 Apr 2015 22:27:34 +1100 (AEDT) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 1EA813927; Sat, 4 Apr 2015 13:27:33 +0200 (CEST) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id o6arp4TO5G4R; Sat, 4 Apr 2015 13:27:33 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 2E3023929; Sat, 4 Apr 2015 13:27:31 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 0E2AC62085 for ; Sat, 4 Apr 2015 13:27:28 +0200 (CEST) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id osN4aIJFw1lw for ; Sat, 4 Apr 2015 13:27:27 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from gagarine.paulk.fr (gagarine.paulk.fr [109.190.93.129]) by theia.denx.de (Postfix) with ESMTPS id 7855162087 for ; Sat, 4 Apr 2015 13:27:25 +0200 (CEST) Received: by gagarine.paulk.fr (Postfix, from userid 65534) id DA22B203D6; Sat, 4 Apr 2015 13:27:24 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on gagarine.paulk.fr X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=none autolearn=unavailable autolearn_force=no version=3.4.0 Received: from localhost.localdomain (collins [192.168.1.129]) by gagarine.paulk.fr (Postfix) with ESMTP id AD260203BA; Sat, 4 Apr 2015 13:27:14 +0200 (CEST) From: Paul Kocialkowski To: u-boot@lists.denx.de Date: Sat, 4 Apr 2015 13:27:05 +0200 Message-Id: <1428146826-24078-2-git-send-email-contact@paulk.fr> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1428146826-24078-1-git-send-email-contact@paulk.fr> References: <1428146826-24078-1-git-send-email-contact@paulk.fr> Cc: Ian Campbell Subject: [U-Boot] [PATCH 1/2] i2c: mvtwsi: Support for up to 4 different controllers X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" Orion5x, Kirkwood and Armada XP platforms come with a single TWSI (I2C) MVTWSI controller. However, other platforms using MVTWSI may come with more: this is the case on Allwinner (sunxi) platforms, where up to 4 controllers can be found on the same chip. Signed-off-by: Paul Kocialkowski Acked-by: Hans de Goede --- arch/arm/include/asm/arch-sunxi/i2c.h | 2 +- arch/arm/mach-kirkwood/include/mach/config.h | 2 +- drivers/i2c/mvtwsi.c | 124 ++++++++++++++++++++------- include/configs/db-mv784mp-gp.h | 2 +- include/configs/edminiv2.h | 2 +- include/configs/maxbcm.h | 2 +- 6 files changed, 100 insertions(+), 34 deletions(-) diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h index dc5406b..502e3c6 100644 --- a/arch/arm/include/asm/arch-sunxi/i2c.h +++ b/arch/arm/include/asm/arch-sunxi/i2c.h @@ -8,7 +8,7 @@ #include -#define CONFIG_I2C_MVTWSI_BASE SUNXI_TWI0_BASE +#define CONFIG_I2C_MVTWSI_BASE0 SUNXI_TWI0_BASE /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */ #define CONFIG_SYS_TCLK 24000000 diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index e77ac40..d049395 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -44,7 +44,7 @@ #define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 #define CONFIG_NR_DRAM_BANKS_MAX 2 -#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE +#define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE #define MV_UART_CONSOLE_BASE KW_UART0_BASE #define MV_SATA_BASE KW_SATA_BASE #define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index 6f6edd5..331d73c 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -14,7 +14,7 @@ #include /* - * include a file that will provide CONFIG_I2C_MVTWSI_BASE + * include a file that will provide CONFIG_I2C_MVTWSI_BASE* * and possibly other settings */ @@ -91,11 +91,37 @@ struct mvtwsi_registers { #define MVTWSI_STATUS_IDLE 0xF8 /* - * The single instance of the controller we'll be dealing with + * MVTWSI controller base */ -static struct mvtwsi_registers *twsi = - (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE; +static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap) +{ + switch (adap->hwadapnr) { + case 0: + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE0; +#ifdef CONFIG_I2C_MVTWSI_BASE1 + case 1: + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE1; +#endif +#ifdef CONFIG_I2C_MVTWSI_BASE2 + case 2: + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE2; +#endif +#ifdef CONFIG_I2C_MVTWSI_BASE3 + case 3: + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE3; +#endif +#ifdef CONFIG_I2C_MVTWSI_BASE4 + case 4: + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE4; +#endif + default: + printf("Missing mvtwsi controller %d base\n", adap->hwadapnr); + break; + } + + return NULL; +} /* * Returned statuses are 0 for success and nonzero otherwise. @@ -117,8 +143,9 @@ static struct mvtwsi_registers *twsi = * Wait for IFLG to raise, or return 'timeout'; then if status is as expected, * return 0 (ok) or return 'wrong status'. */ -static int twsi_wait(int expected_status) +static int twsi_wait(struct i2c_adapter *adap, int expected_status) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); int control, status; int timeout = 1000; @@ -153,35 +180,40 @@ static u8 twsi_control_flags = MVTWSI_CONTROL_TWSIEN; * Assert the START condition, either in a single I2C transaction * or inside back-to-back ones (repeated starts). */ -static int twsi_start(int expected_status) +static int twsi_start(struct i2c_adapter *adap, int expected_status) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); + /* globally set TWSIEN in case it was not */ twsi_control_flags |= MVTWSI_CONTROL_TWSIEN; /* assert START */ writel(twsi_control_flags | MVTWSI_CONTROL_START, &twsi->control); /* wait for controller to process START */ - return twsi_wait(expected_status); + return twsi_wait(adap, expected_status); } /* * Send a byte (i2c address or data). */ -static int twsi_send(u8 byte, int expected_status) +static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); + /* put byte in data register for sending */ writel(byte, &twsi->data); /* clear any pending interrupt -- that'll cause sending */ writel(twsi_control_flags, &twsi->control); /* wait for controller to receive byte and check ACK */ - return twsi_wait(expected_status); + return twsi_wait(adap, expected_status); } /* * Receive a byte. * Global mvtwsi_control_flags variable says if we should ack or nak. */ -static int twsi_recv(u8 *byte) +static int twsi_recv(struct i2c_adapter *adap, u8 *byte) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); int expected_status, status; /* compute expected status based on ACK bit in global control flags */ @@ -192,7 +224,7 @@ static int twsi_recv(u8 *byte) /* acknowledge *previous state* and launch receive */ writel(twsi_control_flags, &twsi->control); /* wait for controller to receive byte and assert ACK or NAK */ - status = twsi_wait(expected_status); + status = twsi_wait(adap, expected_status); /* if we did receive expected byte then store it */ if (status == 0) *byte = readl(&twsi->data); @@ -204,8 +236,9 @@ static int twsi_recv(u8 *byte) * Assert the STOP condition. * This is also used to force the bus back in idle (SDA=SCL=1). */ -static int twsi_stop(int status) +static int twsi_stop(struct i2c_adapter *adap, int status) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); int control, stop_status; int timeout = 1000; @@ -244,6 +277,7 @@ static unsigned int twsi_calc_freq(const int n, const int m) */ static void twsi_reset(struct i2c_adapter *adap) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); /* ensure controller will be enabled by any twsi*() function */ twsi_control_flags = MVTWSI_CONTROL_TWSIEN; /* reset controller */ @@ -259,6 +293,7 @@ static void twsi_reset(struct i2c_adapter *adap) static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap, unsigned int requested_speed) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); unsigned int tmp_speed, highest_speed, n, m; unsigned int baud = 0x44; /* baudrate at controller reset */ @@ -281,6 +316,8 @@ static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap, static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { + struct mvtwsi_registers *twsi = twsi_get_base(adap); + /* reset controller */ twsi_reset(adap); /* set speed */ @@ -289,7 +326,7 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) writel(slaveadd, &twsi->slave_address); writel(0, &twsi->xtnd_slave_addr); /* assert STOP but don't care for the result */ - (void) twsi_stop(0); + (void) twsi_stop(adap, 0); } /* @@ -297,7 +334,8 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) * Common to i2c_probe, i2c_read and i2c_write. * Expected address status will derive from direction bit (bit 0) in addr. */ -static int i2c_begin(int expected_start_status, u8 addr) +static int i2c_begin(struct i2c_adapter *adap, int expected_start_status, + u8 addr) { int status, expected_addr_status; @@ -307,10 +345,10 @@ static int i2c_begin(int expected_start_status, u8 addr) else /* writing */ expected_addr_status = MVTWSI_STATUS_ADDR_W_ACK; /* assert START */ - status = twsi_start(expected_start_status); + status = twsi_start(adap, expected_start_status); /* send out the address if the start went well */ if (status == 0) - status = twsi_send(addr, expected_addr_status); + status = twsi_send(adap, addr, expected_addr_status); /* return ok or status of first failure to caller */ return status; } @@ -325,12 +363,12 @@ static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip) int status; /* begin i2c read */ - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1) | 1); + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1) | 1); /* dummy read was accepted: receive byte but NAK it. */ if (status == 0) - status = twsi_recv(&dummy_byte); + status = twsi_recv(adap, &dummy_byte); /* Stop transaction */ - twsi_stop(0); + twsi_stop(adap, 0); /* return 0 or status of first failure */ return status; } @@ -351,15 +389,15 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, int status; /* begin i2c write to send the address bytes */ - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1)); + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); /* send addr bytes */ while ((status == 0) && alen--) - status = twsi_send(addr >> (8*alen), + status = twsi_send(adap, addr >> (8*alen), MVTWSI_STATUS_DATA_W_ACK); /* begin i2c read to receive eeprom data bytes */ if (status == 0) - status = i2c_begin( - MVTWSI_STATUS_REPEATED_START, (chip << 1) | 1); + status = i2c_begin(adap, MVTWSI_STATUS_REPEATED_START, + (chip << 1) | 1); /* prepare ACK if at least one byte must be received */ if (length > 0) twsi_control_flags |= MVTWSI_CONTROL_ACK; @@ -369,10 +407,10 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, if (length == 0) twsi_control_flags &= ~MVTWSI_CONTROL_ACK; /* read current byte */ - status = twsi_recv(data++); + status = twsi_recv(adap, data++); } /* Stop transaction */ - status = twsi_stop(status); + status = twsi_stop(adap, status); /* return 0 or status of first failure */ return status; } @@ -387,16 +425,16 @@ static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, int status; /* begin i2c write to send the eeprom adress bytes then data bytes */ - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1)); + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); /* send addr bytes */ while ((status == 0) && alen--) - status = twsi_send(addr >> (8*alen), + status = twsi_send(adap, addr >> (8*alen), MVTWSI_STATUS_DATA_W_ACK); /* send data bytes */ while ((status == 0) && (length-- > 0)) - status = twsi_send(*(data++), MVTWSI_STATUS_DATA_W_ACK); + status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK); /* Stop transaction */ - status = twsi_stop(status); + status = twsi_stop(adap, status); /* return 0 or status of first failure */ return status; } @@ -405,3 +443,31 @@ U_BOOT_I2C_ADAP_COMPLETE(twsi0, twsi_i2c_init, twsi_i2c_probe, twsi_i2c_read, twsi_i2c_write, twsi_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0) +#ifdef CONFIG_I2C_MVTWSI_BASE1 +U_BOOT_I2C_ADAP_COMPLETE(twsi1, twsi_i2c_init, twsi_i2c_probe, + twsi_i2c_read, twsi_i2c_write, + twsi_i2c_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 1) + +#endif +#ifdef CONFIG_I2C_MVTWSI_BASE2 +U_BOOT_I2C_ADAP_COMPLETE(twsi2, twsi_i2c_init, twsi_i2c_probe, + twsi_i2c_read, twsi_i2c_write, + twsi_i2c_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 2) + +#endif +#ifdef CONFIG_I2C_MVTWSI_BASE3 +U_BOOT_I2C_ADAP_COMPLETE(twsi3, twsi_i2c_init, twsi_i2c_probe, + twsi_i2c_read, twsi_i2c_write, + twsi_i2c_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 3) + +#endif +#ifdef CONFIG_I2C_MVTWSI_BASE4 +U_BOOT_I2C_ADAP_COMPLETE(twsi4, twsi_i2c_init, twsi_i2c_probe, + twsi_i2c_read, twsi_i2c_write, + twsi_i2c_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 4) + +#endif diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 1683a15..4dd7b11 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -37,7 +37,7 @@ /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI -#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 5ce01fb..bd08740 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -208,7 +208,7 @@ #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI -#define CONFIG_I2C_MVTWSI_BASE ORION5X_TWSI_BASE +#define CONFIG_I2C_MVTWSI_BASE0 ORION5X_TWSI_BASE #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 #endif diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 5999d60..e909623 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -35,7 +35,7 @@ /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI -#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000