| Message ID | 1425972805-9489-1-git-send-email-Peng.Fan@freescale.com |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | Stefano Babic |
| Headers | show |
On 10/03/2015 08:33, Peng Fan wrote: > Before add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN, > uboot will complains "CPU: Temperature: Can't find sensor device". > This is because DM and DM_THERMAL are enabled, but SYS_MALLOC_F > is not configured. > > After applying this patch, uboot can correctly detect the temperature. > " > U-Boot 2015.04-rc2-00146-g48b6e30-dirty (Mar 09 2015 - 13:04:36) > > CPU: Freescale i.MX6DL rev1.1 at 792 MHz > CPU: Temperature 44 C > " > > Signed-off-by: Peng Fan <Peng.Fan@freescale.com> > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic
diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 6adfd55..cde0d70 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -1,5 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y
Before add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN, uboot will complains "CPU: Temperature: Can't find sensor device". This is because DM and DM_THERMAL are enabled, but SYS_MALLOC_F is not configured. After applying this patch, uboot can correctly detect the temperature. " U-Boot 2015.04-rc2-00146-g48b6e30-dirty (Mar 09 2015 - 13:04:36) CPU: Freescale i.MX6DL rev1.1 at 792 MHz CPU: Temperature 44 C " Signed-off-by: Peng Fan <Peng.Fan@freescale.com> --- configs/mx6dlsabresd_defconfig | 2 ++ 1 file changed, 2 insertions(+)