diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6317d9d..9b3a71c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -97,14 +97,6 @@ config TARGET_SCB9328
 	bool "Support scb9328"
 	select CPU_ARM920T
 
-config TARGET_CM4008
-	bool "Support cm4008"
-	select CPU_ARM920T
-
-config TARGET_CM41XX
-	bool "Support cm41xx"
-	select CPU_ARM920T
-
 config TARGET_VCMA9
 	bool "Support VCMA9"
 	select CPU_ARM920T
@@ -875,8 +867,6 @@ source "board/calao/sbc35_a9g20/Kconfig"
 source "board/calao/tny_a9260/Kconfig"
 source "board/calao/usb_a9263/Kconfig"
 source "board/cirrus/edb93xx/Kconfig"
-source "board/cm4008/Kconfig"
-source "board/cm41xx/Kconfig"
 source "board/compulab/cm_t335/Kconfig"
 source "board/compulab/cm_fx6/Kconfig"
 source "board/congatec/cgtqmx6eval/Kconfig"
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index a72e5de..a30a572 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -14,5 +14,4 @@ obj-$(if $(filter a320,$(SOC)),y) += a320/
 obj-$(CONFIG_AT91FAMILY) += at91/
 obj-$(CONFIG_EP93XX) += ep93xx/
 obj-$(CONFIG_IMX) += imx/
-obj-$(CONFIG_KS8695) += ks8695/
 obj-$(CONFIG_S3C24X0) += s3c24x0/
diff --git a/arch/arm/cpu/arm920t/ks8695/Makefile b/arch/arm/cpu/arm920t/ks8695/Makefile
deleted file mode 100644
index 400aa89..0000000
--- a/arch/arm/cpu/arm920t/ks8695/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= lowlevel_init.o
-obj-y	+= timer.o
diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
deleted file mode 100644
index a2a07f2..0000000
--- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- *  lowlevel_init.S - basic hardware initialization for the KS8695 CPU
- *
- *  Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/platform.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- *************************************************************************
- *
- * Handy dandy macros
- *
- *************************************************************************
- */
-
-/* Delay a bit */
-.macro DELAY_FOR cycles, reg0
-	ldr     \reg0, =\cycles
-	subs    \reg0, \reg0, #1
-	subne   pc,  pc, #0xc
-.endm
-
-/*
- *************************************************************************
- *
- * Some local storage.
- *
- *************************************************************************
- */
-
-/* Should we boot with an interactive console or not */
-.globl serial_console
-
-/*
- *************************************************************************
- *
- * Raw hardware initialization code. The important thing is to get
- * SDRAM setup and running. We do some other basic things here too,
- * like getting the PLL set for high speed, and init the LEDs.
- *
- *************************************************************************
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-#if DEBUG
-	/*
-	 * enable UART for early debug trace
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
-	mov	r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
-	str	r2, [r1]
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
-	mov	r2, #KS8695_UART_LINEC_WLEN8
-	str	r2, [r1]		/* 8 data bits, no parity, 1 stop */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
-	mov	r2, #0x41
-	str	r2, [r1]		/* write 'A' */
-#endif
-#if DEBUG
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
-	mov	r2, #0x42
-	str	r2, [r1]
-#endif
-
-	/*
-	 * remap the memory and flash regions. we want to end up with
-	 * ram from address 0, and flash at 32MB.
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
-	ldr	r2, =0xbfc00040
-	str	r2, [r1]		/* large flash map */
-	ldr	pc, =(highflash+0x02000000-0x00f00000)	/* jump to high flash address */
-highflash:
-	ldr	r2, =0x8fe00040
-	str	r2, [r1]		/* remap flash range */
-
-	/*
-	 * remap the second select region to the 4MB immediately after
-	 * the first region. This way if you have a larger flash (say 8Mb)
-	 * then you can have it all mapped nicely. Has no effect if you
-	 * only have a 4Mb or smaller flash.
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1)
-	ldr	r2, =0x9fe40040
-	str	r2, [r1]		/* remap flash2 region, contiguous */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
-	ldr	r2, =0x30000005
-	str	r2, [r1]		/* enable both flash selects */
-
-#ifdef CONFIG_CM41xx
-	/*
-	 * map the second flash chip, using the external IO lines.
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0)
-	ldr	r2, =0xafe80b6d
-	str	r2, [r1]		/* remap io0 region, contiguous */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1)
-	ldr	r2, =0xbfec0b6d
-	str	r2, [r1]		/* remap io1 region, contiguous */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
-	ldr	r2, =0x30050005
-	str	r2, [r1]		/* enable second flash */
-#endif
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0)
-#if (PHYS_SDRAM_1_SIZE == 0x02000000)
-	ldr	r2, =0x7fc0000e		/* 32MB */
-#else
-	ldr	r2, =0x3fc0000e		/* 16MB */
-#endif
-	str	r2, [r1]		/* configure sdram bank0 setup */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1)
-	mov	r2, #0
-	str	r2, [r1]		/* configure sdram bank1 setup */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL)
-	ldr	r2, =0x0000000a
-	str	r2, [r1]		/* set RAS/CAS timing */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
-	ldr	r2, =0x00030000
-	str	r2, [r1]		/* send NOP command */
-	DELAY_FOR 0x100, r0
-	ldr	r2, =0x00010000
-	str	r2, [r1]		/* send PRECHARGE-ALL */
-	DELAY_FOR 0x100, r0
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH)
-	ldr	r2, =0x00000020
-	str	r2, [r1]		/* set for fast refresh */
-	DELAY_FOR 0x100, r0
-	ldr	r2, =0x00000190
-	str	r2, [r1]		/* set normal refresh timing */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
-	ldr	r2, =0x00020033
-	str	r2, [r1]		/* send mode command */
-	DELAY_FOR 0x100, r0
-	ldr	r2, =0x01f00000
-	str	r2, [r1]		/* enable sdram fifos */
-
-	/*
-	 * set pll to top speed
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK)
-	mov	r2, #0
-	str	r2, [r1]		/* set pll clock to 166MHz */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0)
-	ldr	r2, [r1]		/* Get switch ctrl0 register       */
-	and	r2, r2, #0x0fc00000	/* Mask out LED control bits       */
-	orr	r2, r2, #0x01800000	/* Set Link/activity/speed actions */
-	str	r2, [r1]
-
-#ifdef CONFIG_CM4008
-	ldr	r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE)
-	ldr	r2, =0x0000fe30
-	str	r2, [r1]		/* enable LED's as outputs	    */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA)
-	ldr	r2, =0x0000fe20
-	str	r2, [r1]		/* turn on power LED		    */
-#endif
-#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx)
-	ldr	r2, [r1]		/* get current GPIO input data	    */
-	tst	r2, #0x8		/* check if "erase" depressed	    */
-	beq	nobutton
-	mov	r2, #0			/* be quiet on boot, no console	    */
-	ldr	r1, =serial_console
-	str	r2, [r1]
-nobutton:
-#endif
-
-	add	lr, lr, #0x02000000	/* flash is now mapped high */
-	add	ip, ip, #0x02000000	/* this is a hack */
-	mov	pc, lr			/* all done, return */
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/arch/arm/cpu/arm920t/ks8695/timer.c b/arch/arm/cpu/arm920t/ks8695/timer.c
deleted file mode 100644
index 23db557..0000000
--- a/arch/arm/cpu/arm920t/ks8695/timer.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-
-/*
- * Initial timer set constants. Nothing complicated, just set for a 1ms
- * tick.
- */
-#define	TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_1)
-#define	TIMER_COUNT	(TIMER_INTERVAL / 2)
-#define	TIMER_PULSE	TIMER_COUNT
-
-/*
- * Handy KS8695 register access functions.
- */
-#define	ks8695_read(a)    *((volatile ulong *) (KS8695_IO_BASE + (a)))
-#define	ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v)
-
-ulong timer_ticks;
-
-int timer_init (void)
-{
-	/* Set the hadware timer for 1ms */
-	ks8695_write(KS8695_TIMER1, TIMER_COUNT);
-	ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE);
-	ks8695_write(KS8695_TIMER_CTRL, 0x2);
-	timer_ticks = 0;
-
-	return 0;
-}
-
-ulong get_timer_masked(void)
-{
-	/* Check for timer wrap */
-	if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) {
-		/* Clear interrupt condition */
-		ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1);
-		timer_ticks++;
-	}
-	return timer_ticks;
-}
-
-ulong get_timer(ulong base)
-{
-       return (get_timer_masked() - base);
-}
-
-void __udelay(ulong usec)
-{
-	ulong start = get_timer_masked();
-	ulong end;
-
-	/* Only 1ms resolution :-( */
-	end = usec / 1000;
-	while (get_timer(start) < end)
-		;
-}
-
-void reset_cpu (ulong ignored)
-{
-	ulong tc;
-
-	/* Set timer0 to watchdog, and let it timeout */
-	tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2;
-	ks8695_write(KS8695_TIMER_CTRL, tc);
-	ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff));
-	ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1));
-
-	/* Should only wait here till watchdog resets */
-	for (;;)
-		;
-}
diff --git a/arch/arm/include/asm/arch-ks8695/platform.h b/arch/arm/include/asm/arch-ks8695/platform.h
deleted file mode 100644
index 02f6049..0000000
--- a/arch/arm/include/asm/arch-ks8695/platform.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __address_h
-#define __address_h			1
-
-#define KS8695_SDRAM_START	    0x00000000
-#define KS8695_SDRAM_SIZE	    0x01000000
-#define KS8695_MEM_SIZE		    KS8695_SDRAM_SIZE
-#define KS8695_MEM_START	    KS8695_SDRAM_START
-
-#define KS8695_PCMCIA_IO_BASE	    0x03800000
-#define KS8695_PCMCIA_IO_SIZE	    0x00040000
-
-#define KS8695_IO_BASE		    0x03FF0000
-#define KS8695_IO_SIZE		    0x00010000
-
-#define KS8695_SYSTEN_CONFIG	    0x00
-#define KS8695_SYSTEN_BUS_CLOCK	    0x04
-
-#define KS8695_FLASH_START	    0x02800000
-#define KS8695_FLASH_SIZE	    0x00400000
-
-/*i/o control registers offset difinitions*/
-#define KS8695_IO_CTRL0		    0x4000
-#define KS8695_IO_CTRL1		    0x4004
-#define KS8695_IO_CTRL2		    0x4008
-#define KS8695_IO_CTRL3		    0x400C
-
-/*memory control registers offset difinitions*/
-#define KS8695_MEM_CTRL0	    0x4010
-#define KS8695_MEM_CTRL1	    0x4014
-#define KS8695_MEM_CTRL2	    0x4018
-#define KS8695_MEM_CTRL3	    0x401C
-#define KS8695_MEM_GENERAL	    0x4020
-#define KS8695_SDRAM_CTRL0	    0x4030
-#define KS8695_SDRAM_CTRL1	    0x4034
-#define KS8695_SDRAM_GENERAL	    0x4038
-#define KS8695_SDRAM_BUFFER	    0x403C
-#define KS8695_SDRAM_REFRESH	    0x4040
-
-/*WAN control registers offset difinitions*/
-#define KS8695_WAN_DMA_TX	    0x6000
-#define KS8695_WAN_DMA_RX	    0x6004
-#define KS8695_WAN_DMA_TX_START	    0x6008
-#define KS8695_WAN_DMA_RX_START	    0x600C
-#define KS8695_WAN_TX_LIST	    0x6010
-#define KS8695_WAN_RX_LIST	    0x6014
-#define KS8695_WAN_MAC_LOW	    0x6018
-#define KS8695_WAN_MAC_HIGH	    0x601C
-#define KS8695_WAN_MAC_ELOW	    0x6080
-#define KS8695_WAN_MAC_EHIGH	    0x6084
-
-/*LAN control registers offset difinitions*/
-#define KS8695_LAN_DMA_TX	    0x8000
-#define KS8695_LAN_DMA_RX	    0x8004
-#define KS8695_LAN_DMA_TX_START	    0x8008
-#define KS8695_LAN_DMA_RX_START	    0x800C
-#define KS8695_LAN_TX_LIST	    0x8010
-#define KS8695_LAN_RX_LIST	    0x8014
-#define KS8695_LAN_MAC_LOW	    0x8018
-#define KS8695_LAN_MAC_HIGH	    0x801C
-#define KS8695_LAN_MAC_ELOW	    0X8080
-#define KS8695_LAN_MAC_EHIGH	    0X8084
-
-/*HPNA control registers offset difinitions*/
-#define KS8695_HPNA_DMA_TX	    0xA000
-#define KS8695_HPNA_DMA_RX	    0xA004
-#define KS8695_HPNA_DMA_TX_START    0xA008
-#define KS8695_HPNA_DMA_RX_START    0xA00C
-#define KS8695_HPNA_TX_LIST	    0xA010
-#define KS8695_HPNA_RX_LIST	    0xA014
-#define KS8695_HPNA_MAC_LOW	    0xA018
-#define KS8695_HPNA_MAC_HIGH	    0xA01C
-#define KS8695_HPNA_MAC_ELOW	    0xA080
-#define KS8695_HPNA_MAC_EHIGH	    0xA084
-
-/*UART control registers offset difinitions*/
-#define KS8695_UART_RX_BUFFER	    0xE000
-#define KS8695_UART_TX_HOLDING	    0xE004
-
-#define KS8695_UART_FIFO_CTRL	    0xE008
-#define KS8695_UART_FIFO_TRIG01	    0x00
-#define KS8695_UART_FIFO_TRIG04	    0x80
-#define KS8695_UART_FIFO_TXRST	    0x03
-#define KS8695_UART_FIFO_RXRST	    0x02
-#define KS8695_UART_FIFO_FEN	    0x01
-
-#define KS8695_UART_LINE_CTRL	    0xE00C
-#define KS8695_UART_LINEC_BRK	    0x40
-#define KS8695_UART_LINEC_EPS	    0x10
-#define KS8695_UART_LINEC_PEN	    0x08
-#define KS8695_UART_LINEC_STP2	    0x04
-#define KS8695_UART_LINEC_WLEN8	    0x03
-#define KS8695_UART_LINEC_WLEN7	    0x02
-#define KS8695_UART_LINEC_WLEN6	    0x01
-#define KS8695_UART_LINEC_WLEN5	    0x00
-
-#define KS8695_UART_MODEM_CTRL	    0xE010
-#define KS8695_UART_MODEMC_RTS	    0x02
-#define KS8695_UART_MODEMC_DTR	    0x01
-
-#define KS8695_UART_LINE_STATUS	    0xE014
-#define KS8695_UART_LINES_TXFE	    0x20
-#define KS8695_UART_LINES_BE	    0x10
-#define KS8695_UART_LINES_FE	    0x08
-#define KS8695_UART_LINES_PE	    0x04
-#define KS8695_UART_LINES_OE	    0x02
-#define KS8695_UART_LINES_RXFE	    0x01
-#define KS8695_UART_LINES_ANY	    (KS8695_UART_LINES_OE|KS8695_UART_LINES_BE|KS8695_UART_LINES_PE|KS8695_UART_LINES_FE)
-
-#define KS8695_UART_MODEM_STATUS    0xE018
-#define KS8695_UART_MODEM_DCD	    0x80
-#define KS8695_UART_MODEM_DSR	    0x20
-#define KS8695_UART_MODEM_CTS	    0x10
-#define KS8695_UART_MODEM_DDCD	    0x08
-#define KS8695_UART_MODEM_DDSR	    0x02
-#define KS8695_UART_MODEM_DCTS	    0x01
-#define UART8695_MODEM_ANY	    0xFF
-
-#define KS8695_UART_DIVISOR	    0xE01C
-#define KS8695_UART_STATUS	    0xE020
-
-/*Interrupt controlller registers offset difinitions*/
-#define KS8695_INT_CONTL	    0xE200
-#define KS8695_INT_ENABLE	    0xE204
-#define KS8695_INT_ENABLE_MODEM	    0x0800
-#define KS8695_INT_ENABLE_ERR	    0x0400
-#define KS8695_INT_ENABLE_RX	    0x0200
-#define KS8695_INT_ENABLE_TX	    0x0100
-
-#define KS8695_INT_STATUS	    0xE208
-#define KS8695_INT_WAN_PRIORITY	    0xE20C
-#define KS8695_INT_HPNA_PRIORITY    0xE210
-#define KS8695_INT_LAN_PRIORITY	    0xE214
-#define KS8695_INT_TIMER_PRIORITY   0xE218
-#define KS8695_INT_UART_PRIORITY    0xE21C
-#define KS8695_INT_EXT_PRIORITY	    0xE220
-#define KS8695_INT_CHAN_PRIORITY    0xE224
-#define KS8695_INT_BUSERROR_PRO	    0xE228
-#define KS8695_INT_MASK_STATUS	    0xE22C
-#define KS8695_FIQ_PEND_PRIORITY    0xE230
-#define KS8695_IRQ_PEND_PRIORITY    0xE234
-
-/*timer registers offset difinitions*/
-#define KS8695_TIMER_CTRL	    0xE400
-#define KS8695_TIMER1		    0xE404
-#define KS8695_TIMER0		    0xE408
-#define KS8695_TIMER1_PCOUNT	    0xE40C
-#define KS8695_TIMER0_PCOUNT	    0xE410
-
-/*GPIO registers offset difinitions*/
-#define KS8695_GPIO_MODE	    0xE600
-#define KS8695_GPIO_CTRL	    0xE604
-#define KS8695_GPIO_DATA	    0xE608
-
-/*SWITCH registers offset difinitions*/
-#define KS8695_SWITCH_CTRL0	    0xE800
-#define KS8695_SWITCH_CTRL1	    0xE804
-#define KS8695_SWITCH_PORT1	    0xE808
-#define KS8695_SWITCH_PORT2	    0xE80C
-#define KS8695_SWITCH_PORT3	    0xE810
-#define KS8695_SWITCH_PORT4	    0xE814
-#define KS8695_SWITCH_PORT5	    0xE818
-#define KS8695_SWITCH_AUTO0	    0xE81C
-#define KS8695_SWITCH_AUTO1	    0xE820
-#define KS8695_SWITCH_LUE_CTRL	    0xE824
-#define KS8695_SWITCH_LUE_HIGH	    0xE828
-#define KS8695_SWITCH_LUE_LOW	    0xE82C
-#define KS8695_SWITCH_ADVANCED	    0xE830
-
-#define KS8695_SWITCH_LPPM12	    0xE874
-#define KS8695_SWITCH_LPPM34	    0xE878
-
-/*host communication registers difinitions*/
-#define KS8695_DSCP_HIGH	    0xE834
-#define KS8695_DSCP_LOW		    0xE838
-#define KS8695_SWITCH_MAC_HIGH	    0xE83C
-#define KS8695_SWITCH_MAC_LOW	    0xE840
-
-/*miscellaneours registers difinitions*/
-#define KS8695_MANAGE_COUNTER	    0xE844
-#define KS8695_MANAGE_DATA	    0xE848
-#define KS8695_LAN12_POWERMAGR	    0xE84C
-#define KS8695_LAN34_POWERMAGR	    0xE850
-
-#define KS8695_DEVICE_ID	    0xEA00
-#define KS8695_REVISION_ID	    0xEA04
-
-#define KS8695_MISC_CONTROL	    0xEA08
-#define KS8695_WAN_CONTROL	    0xEA0C
-#define KS8695_WAN_POWERMAGR	    0xEA10
-#define KS8695_WAN_PHY_CONTROL	    0xEA14
-#define KS8695_WAN_PHY_STATUS	    0xEA18
-
-/* bus clock definitions*/
-#define KS8695_BUS_CLOCK_125MHZ	    0x0
-#define KS8695_BUS_CLOCK_100MHZ	    0x1
-#define KS8695_BUS_CLOCK_62MHZ	    0x2
-#define KS8695_BUS_CLOCK_50MHZ	    0x3
-#define KS8695_BUS_CLOCK_41MHZ	    0x4
-#define KS8695_BUS_CLOCK_33MHZ	    0x5
-#define KS8695_BUS_CLOCK_31MHZ	    0x6
-#define KS8695_BUS_CLOCK_25MHZ	    0x7
-
-/* -------------------------------------------------------------------------------
- *  definations for IRQ
- * -------------------------------------------------------------------------------*/
-
-#define KS8695_INT_EXT_INT0		       2
-#define KS8695_INT_EXT_INT1		       3
-#define KS8695_INT_EXT_INT2		       4
-#define KS8695_INT_EXT_INT3		       5
-#define KS8695_INT_TIMERINT0		       6
-#define KS8695_INT_TIMERINT1		       7
-#define KS8695_INT_UART_TX		       8
-#define KS8695_INT_UART_RX		       9
-#define KS8695_INT_UART_LINE_ERR	       10
-#define KS8695_INT_UART_MODEMS		       11
-#define KS8695_INT_LAN_STOP_RX		       12
-#define KS8695_INT_LAN_STOP_TX		       13
-#define KS8695_INT_LAN_BUF_RX_STATUS	       14
-#define KS8695_INT_LAN_BUF_TX_STATUS	       15
-#define KS8695_INT_LAN_RX_STATUS	       16
-#define KS8695_INT_LAN_TX_STATUS	       17
-#define KS8695_INT_HPAN_STOP_RX		       18
-#define KS8695_INT_HPNA_STOP_TX		       19
-#define KS8695_INT_HPNA_BUF_RX_STATUS	       20
-#define KS8695_INT_HPNA_BUF_TX_STATUS	       21
-#define KS8695_INT_HPNA_RX_STATUS	       22
-#define KS8695_INT_HPNA_TX_STATUS	       23
-#define KS8695_INT_BUS_ERROR		       24
-#define KS8695_INT_WAN_STOP_RX		       25
-#define KS8695_INT_WAN_STOP_TX		       26
-#define KS8695_INT_WAN_BUF_RX_STATUS	       27
-#define KS8695_INT_WAN_BUF_TX_STATUS	       28
-#define KS8695_INT_WAN_RX_STATUS	       29
-#define KS8695_INT_WAN_TX_STATUS	       30
-
-#define KS8695_INT_UART			       KS8695_INT_UART_TX
-
-/* -------------------------------------------------------------------------------
- *  Interrupt bit positions
- *
- * -------------------------------------------------------------------------------
- */
-
-#define KS8695_INTMASK_EXT_INT0		       ( 1 << KS8695_INT_EXT_INT0 )
-#define KS8695_INTMASK_EXT_INT1		       ( 1 << KS8695_INT_EXT_INT1 )
-#define KS8695_INTMASK_EXT_INT2		       ( 1 << KS8695_INT_EXT_INT2 )
-#define KS8695_INTMASK_EXT_INT3		       ( 1 << KS8695_INT_EXT_INT3 )
-#define KS8695_INTMASK_TIMERINT0	       ( 1 << KS8695_INT_TIMERINT0 )
-#define KS8695_INTMASK_TIMERINT1	       ( 1 << KS8695_INT_TIMERINT1 )
-#define KS8695_INTMASK_UART_TX		       ( 1 << KS8695_INT_UART_TX  )
-#define KS8695_INTMASK_UART_RX		       ( 1 << KS8695_INT_UART_RX  )
-#define KS8695_INTMASK_UART_LINE_ERR	       ( 1 << KS8695_INT_UART_LINE_ERR )
-#define KS8695_INTMASK_UART_MODEMS	       ( 1 << KS8695_INT_UART_MODEMS )
-#define KS8695_INTMASK_LAN_STOP_RX	       ( 1 << KS8695_INT_LAN_STOP_RX )
-#define KS8695_INTMASK_LAN_STOP_TX	       ( 1 << KS8695_INT_LAN_STOP_TX )
-#define KS8695_INTMASK_LAN_BUF_RX_STATUS       ( 1 << KS8695_INT_LAN_BUF_RX_STATUS )
-#define KS8695_INTMASK_LAN_BUF_TX_STATUS       ( 1 << KS8695_INT_LAN_BUF_TX_STATUS )
-#define KS8695_INTMASK_LAN_RX_STATUS	       ( 1 << KS8695_INT_LAN_RX_STATUS )
-#define KS8695_INTMASK_LAN_TX_STATUS	       ( 1 << KS8695_INT_LAN_RX_STATUS )
-#define KS8695_INTMASK_HPAN_STOP_RX	       ( 1 << KS8695_INT_HPAN_STOP_RX )
-#define KS8695_INTMASK_HPNA_STOP_TX	       ( 1 << KS8695_INT_HPNA_STOP_TX )
-#define KS8695_INTMASK_HPNA_BUF_RX_STATUS      ( 1 << KS8695_INT_HPNA_BUF_RX_STATUS )
-#define KS8695_INTMAKS_HPNA_BUF_TX_STATUS      ( 1 << KS8695_INT_HPNA_BUF_TX_STATUS
-#define KS8695_INTMASK_HPNA_RX_STATUS	       ( 1 << KS8695_INT_HPNA_RX_STATUS )
-#define KS8695_INTMASK_HPNA_TX_STATUS	       ( 1 << KS8695_INT_HPNA_TX_STATUS )
-#define KS8695_INTMASK_BUS_ERROR	       ( 1 << KS8695_INT_BUS_ERROR )
-#define KS8695_INTMASK_WAN_STOP_RX	       ( 1 << KS8695_INT_WAN_STOP_RX )
-#define KS8695_INTMASK_WAN_STOP_TX	       ( 1 << KS8695_INT_WAN_STOP_TX )
-#define KS8695_INTMASK_WAN_BUF_RX_STATUS       ( 1 << KS8695_INT_WAN_BUF_RX_STATUS )
-#define KS8695_INTMASK_WAN_BUF_TX_STATUS       ( 1 << KS8695_INT_WAN_BUF_TX_STATUS )
-#define KS8695_INTMASK_WAN_RX_STATUS	       ( 1 << KS8695_INT_WAN_RX_STATUS )
-#define KS8695_INTMASK_WAN_TX_STATUS	       ( 1 << KS8695_INT_WAN_TX_STATUS )
-
-#define KS8695_SC_VALID_INT		       0xFFFFFFFF
-#define MAXIRQNUM			       31
-
-/*
- *  Timer definitions
- *
- *  Use timer 1 & 2
- *  (both run at 25MHz).
- *
- */
-#define TICKS_PER_uSEC			25
-#define mSEC_1				1000
-#define mSEC_10				(mSEC_1 * 10)
-
-#endif
-
-/*	END */
diff --git a/board/cm4008/Kconfig b/board/cm4008/Kconfig
deleted file mode 100644
index de87d5b..0000000
--- a/board/cm4008/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CM4008
-
-config SYS_BOARD
-	default "cm4008"
-
-config SYS_SOC
-	default "ks8695"
-
-config SYS_CONFIG_NAME
-	default "cm4008"
-
-endif
diff --git a/board/cm4008/MAINTAINERS b/board/cm4008/MAINTAINERS
deleted file mode 100644
index 5f08bc3..0000000
--- a/board/cm4008/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM4008 BOARD
-M:	Greg Ungerer <greg.ungerer@opengear.com>
-S:	Maintained
-F:	board/cm4008/
-F:	include/configs/cm4008.h
-F:	configs/cm4008_defconfig
diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
deleted file mode 100644
index 04b1529..0000000
--- a/board/cm4008/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cm4008.o flash.o
diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c
deleted file mode 100644
index 740e164..0000000
--- a/board/cm4008/cm4008.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-#define	ks8695_read(a)	  *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
-#define	ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int env_flash_cmdline (void)
-{
-	char *sp = (char *) 0x0201c020;
-	char *ep;
-	int len;
-
-	/* Check if "erase" push button is depressed */
-	if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
-		printf("### Entering network recovery mode...\n");
-		setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0");
-		setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
-		setenv("bootdelay", "2");
-		return 0;
-	}
-
-	/* Check for flash based kernel boot args to use as default */
-	for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
-		;
-
-	if ((len > 0) && (len <1024))
-		setenv("bootargs", sp);
-
-	return 0;
-}
-
-int board_late_init (void)
-{
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return ks8695_eth_initialize();
-}
-
-int board_init (void)
-{
-	/* arch number of CM4008 */
-	gd->bd->bi_arch_number = 624;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	/* power down all but port 0 on the switch */
-	ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
-	ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
diff --git a/board/cm4008/config.mk b/board/cm4008/config.mk
deleted file mode 100644
index 0d5923b..0000000
--- a/board/cm4008/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c
deleted file mode 100644
index 8315a57..0000000
--- a/board/cm4008/flash.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <asm/sections.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, unsigned char data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		case 1:
-			/* ignore for now */
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
-		       &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
-{
-	volatile unsigned char value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = 0xAA;
-	addr[0x2AAA] = 0x55;
-	addr[0x5555] = 0x90;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (unsigned char)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = 0xFF;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[2];	/* device ID            */
-
-	switch (value) {
-
-	case (unsigned char)INTEL_ID_28F640J3A:
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;		/* => 8 MB     */
-
-	case (unsigned char)INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x01000000;
-		break;		/* => 16 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = 0xFF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int prot, sect;
-	ulong type;
-	int rcode = 0;
-	ulong start;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot)
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	else
-		printf ("\n");
-
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile unsigned char *addr;
-			unsigned char status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			addr = (volatile unsigned char *) (info->start[sect]);
-			*addr = 0x50;	/* clear status register */
-			*addr = 0x20;	/* erase setup */
-			*addr = 0xD0;	/* erase confirm */
-
-			while (((status = *addr) & 0x80) != 0x80) {
-				if (get_timer(start) >
-				    CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = 0xB0;	/* suspend erase */
-					*addr = 0xFF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x50;	/* clear status register cmd */
-			*addr = 0xFF;	/* resest to read mode */
-
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	unsigned char data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	wp = addr;
-	port_width = 1;
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, unsigned char data)
-{
-	volatile unsigned char *addr = (volatile unsigned char *) dest;
-	ulong status;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr,
-			(ulong) * addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	*addr = 0x40;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = 0xFF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*addr = 0xFF;	/* restore read mode */
-
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/cm41xx/Kconfig b/board/cm41xx/Kconfig
deleted file mode 100644
index 99e675b..0000000
--- a/board/cm41xx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CM41XX
-
-config SYS_BOARD
-	default "cm41xx"
-
-config SYS_SOC
-	default "ks8695"
-
-config SYS_CONFIG_NAME
-	default "cm41xx"
-
-endif
diff --git a/board/cm41xx/MAINTAINERS b/board/cm41xx/MAINTAINERS
deleted file mode 100644
index f10eeb5..0000000
--- a/board/cm41xx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM41XX BOARD
-#M:	-
-S:	Maintained
-F:	board/cm41xx/
-F:	include/configs/cm41xx.h
-F:	configs/cm41xx_defconfig
diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile
deleted file mode 100644
index b71ea05..0000000
--- a/board/cm41xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cm41xx.o flash.o
diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c
deleted file mode 100644
index eabad48..0000000
--- a/board/cm41xx/cm41xx.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-#define	ks8695_read(a)	  *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
-#define	ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int env_flash_cmdline (void)
-{
-	char *sp = (char *) 0x0201c020;
-	char *ep;
-	int len;
-
-	/* Check if "erase" push button is depressed */
-	if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
-		printf("### Entering network recovery mode...\n");
-		setenv("bootargs", "console=ttyAM0,115200 mem=32M initrd=0x400000,8M root=/dev/ram0");
-		setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
-		setenv("bootdelay", "2");
-		return 0;
-	}
-
-	/* Check for flash based kernel boot args to use as default */
-	for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
-		;
-
-	if ((len > 0) && (len <1024))
-		setenv("bootargs", sp);
-
-	return 0;
-}
-
-int board_late_init (void)
-{
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return ks8695_eth_initialize();
-}
-
-int board_init (void)
-{
-	/* arch number of CM41xx */
-	gd->bd->bi_arch_number = 672;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	/* power down all but port 0 on the switch */
-	ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
-	ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
diff --git a/board/cm41xx/config.mk b/board/cm41xx/config.mk
deleted file mode 100644
index 0d5923b..0000000
--- a/board/cm41xx/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c
deleted file mode 100644
index 8315a57..0000000
--- a/board/cm41xx/flash.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <asm/sections.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, unsigned char data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		case 1:
-			/* ignore for now */
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
-		       &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
-{
-	volatile unsigned char value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = 0xAA;
-	addr[0x2AAA] = 0x55;
-	addr[0x5555] = 0x90;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (unsigned char)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = 0xFF;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[2];	/* device ID            */
-
-	switch (value) {
-
-	case (unsigned char)INTEL_ID_28F640J3A:
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;		/* => 8 MB     */
-
-	case (unsigned char)INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x01000000;
-		break;		/* => 16 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = 0xFF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int prot, sect;
-	ulong type;
-	int rcode = 0;
-	ulong start;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot)
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	else
-		printf ("\n");
-
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile unsigned char *addr;
-			unsigned char status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			addr = (volatile unsigned char *) (info->start[sect]);
-			*addr = 0x50;	/* clear status register */
-			*addr = 0x20;	/* erase setup */
-			*addr = 0xD0;	/* erase confirm */
-
-			while (((status = *addr) & 0x80) != 0x80) {
-				if (get_timer(start) >
-				    CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = 0xB0;	/* suspend erase */
-					*addr = 0xFF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x50;	/* clear status register cmd */
-			*addr = 0xFF;	/* resest to read mode */
-
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	unsigned char data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	wp = addr;
-	port_width = 1;
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, unsigned char data)
-{
-	volatile unsigned char *addr = (volatile unsigned char *) dest;
-	ulong status;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr,
-			(ulong) * addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	*addr = 0x40;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = 0xFF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*addr = 0xFF;	/* restore read mode */
-
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/configs/cm4008_defconfig b/configs/cm4008_defconfig
deleted file mode 100644
index 487589d..0000000
--- a/configs/cm4008_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_CM4008=y
diff --git a/configs/cm41xx_defconfig b/configs/cm41xx_defconfig
deleted file mode 100644
index 15e9362..0000000
--- a/configs/cm41xx_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_CM41XX=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index ce9dcb1..ba84c90 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+cm4008           arm         arm920t        -           -           Greg Ungerer <greg.ungerer@opengear.com>
+cm41xx           arm         arm920t        -           -
 dkb              arm         arm926ejs      -           -           Lei Wen <leiwen@marvell.com>
 zmx25            arm         arm926ejs      -           -           Matthias Weisser <weisserm@arcor.de>
 jadecpu          arm         arm926ejs      -           -           Matthias Weisser <weisserm@arcor.de>
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 46c4ac6..da5e2bc 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_FTMAC110) += ftmac110.o
 obj-$(CONFIG_FTMAC100) += ftmac100.o
 obj-$(CONFIG_GRETH) += greth.o
 obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
-obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
 obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
 obj-$(CONFIG_LAN91C96) += lan91c96.o
 obj-$(CONFIG_MACB) += macb.o
diff --git a/drivers/net/ks8695eth.c b/drivers/net/ks8695eth.c
deleted file mode 100644
index b4822e9..0000000
--- a/drivers/net/ks8695eth.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * ks8695eth.c -- KS8695 ethernet driver
- *
- * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/****************************************************************************/
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-/****************************************************************************/
-
-/*
- * Hardware register access to the KS8695 LAN ethernet port
- * (well, it is the 4 port switch really).
- */
-#define	ks8695_read(a)    *((volatile unsigned long *) (KS8695_IO_BASE + (a)))
-#define	ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v)
-
-/****************************************************************************/
-
-/*
- * Define the descriptor in-memory data structures.
- */
-struct ks8695_txdesc {
-	uint32_t	owner;
-	uint32_t	ctrl;
-	uint32_t	addr;
-	uint32_t	next;
-};
-
-struct ks8695_rxdesc {
-	uint32_t	status;
-	uint32_t	ctrl;
-	uint32_t	addr;
-	uint32_t	next;
-};
-
-/****************************************************************************/
-
-/*
- * Allocate local data structures to use for receiving and sending
- * packets. Just to keep it all nice and simple.
- */
-
-#define	TXDESCS		4
-#define	RXDESCS		4
-#define	BUFSIZE		2048
-
-volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256)));
-volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256)));
-volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));;
-
-/****************************************************************************/
-
-/*
- *	Ideally we want to use the MAC address stored in flash.
- *	But we do some sanity checks in case they are not present
- *	first.
- */
-unsigned char eth_mac[] = {
-	0x00, 0x13, 0xc6, 0x00, 0x00, 0x00
-};
-
-void ks8695_getmac(void)
-{
-	unsigned char *fp;
-	int i;
-
-	/* Check if flash MAC is valid */
-	fp = (unsigned char *) 0x0201c000;
-	for (i = 0; (i < 6); i++) {
-		if ((fp[i] != 0) && (fp[i] != 0xff))
-			break;
-	}
-
-	/* If we found a valid looking MAC address then use it */
-	if (i < 6)
-		memcpy(&eth_mac[0], fp, 6);
-}
-
-/****************************************************************************/
-
-static int ks8695_eth_init(struct eth_device *dev, bd_t *bd)
-{
-	int i;
-
-	debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__);
-
-	/* Reset the ethernet engines first */
-	ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
-	ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
-
-	ks8695_getmac();
-
-	/* Set MAC address */
-	ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) |
-		(eth_mac[3] << 16) | (eth_mac[2] << 24)));
-	ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8)));
-
-	/* Turn the 4 port switch on */
-	i = ks8695_read(KS8695_SWITCH_CTRL0);
-	ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1));
-	/* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */
-
-	/* Initialize descriptor rings */
-	for (i = 0; (i < TXDESCS); i++) {
-		ks8695_tx[i].owner = 0;
-		ks8695_tx[i].ctrl = 0;
-		ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE];
-		ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1];
-	}
-	ks8695_tx[TXDESCS-1].ctrl = 0x02000000;
-	ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0];
-
-	for (i = 0; (i < RXDESCS); i++) {
-		ks8695_rx[i].status = 0x80000000;
-		ks8695_rx[i].ctrl = BUFSIZE - 4;
-		ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE];
-		ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1];
-	}
-	ks8695_rx[RXDESCS-1].ctrl |= 0x00080000;
-	ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0];
-
-	/* The KS8695 is pretty slow reseting the ethernets... */
-	udelay(2000000);
-
-	/* Enable the ethernet engine */
-	ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]);
-	ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]);
-	ks8695_write(KS8695_LAN_DMA_TX, 0x3);
-	ks8695_write(KS8695_LAN_DMA_RX, 0x71);
-	ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
-
-	printf("KS8695 ETHERNET: %pM\n", eth_mac);
-	return 0;
-}
-
-/****************************************************************************/
-
-static void ks8695_eth_halt(struct eth_device *dev)
-{
-	debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__);
-
-	/* Reset the ethernet engines */
-	ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
-	ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
-}
-
-/****************************************************************************/
-
-static int ks8695_eth_recv(struct eth_device *dev)
-{
-	volatile struct ks8695_rxdesc *dp;
-	int i, len = 0;
-
-	debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__);
-
-	for (i = 0; (i < RXDESCS); i++) {
-		dp= &ks8695_rx[i];
-		if ((dp->status & 0x80000000) == 0) {
-			len = (dp->status & 0x7ff) - 4;
-			NetReceive((void *) dp->addr, len);
-			dp->status = 0x80000000;
-			ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
-			break;
-		}
-	}
-
-	return len;
-}
-
-/****************************************************************************/
-
-static int ks8695_eth_send(struct eth_device *dev, void *packet, int len)
-{
-	volatile struct ks8695_txdesc *dp;
-	static int next = 0;
-
-	debug ("%s(%d): eth_send(packet=%p,len=%d)\n", __FILE__, __LINE__,
-		packet, len);
-
-	dp = &ks8695_tx[next];
-	memcpy((void *) dp->addr, (void *) packet, len);
-
-	if (len < 64) {
-		memset((void *) (dp->addr + len), 0, 64-len);
-		len = 64;
-	}
-
-	dp->ctrl = len | 0xe0000000;
-	dp->owner = 0x80000000;
-
-	ks8695_write(KS8695_LAN_DMA_TX, 0x3);
-	ks8695_write(KS8695_LAN_DMA_TX_START, 0x1);
-
-	if (++next >= TXDESCS)
-		next = 0;
-
-	return 0;
-}
-
-/****************************************************************************/
-
-int ks8695_eth_initialize(void)
-{
-	struct eth_device *dev;
-
-	dev = malloc(sizeof(*dev));
-	if (dev == NULL)
-		return -1;
-	memset(dev, 0, sizeof(*dev));
-
-	dev->iobase = KS8695_IO_BASE + KS8695_LAN_DMA_TX;
-	dev->init = ks8695_eth_init;
-	dev->halt = ks8695_eth_halt;
-	dev->send = ks8695_eth_send;
-	dev->recv = ks8695_eth_recv;
-	strcpy(dev->name, "ks8695eth");
-
-	eth_register(dev);
-	return 0;
-}
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4cc00cd..aefb5b2 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
 obj-$(CONFIG_SYS_NS16550) += ns16550.o
 obj-$(CONFIG_S5P) += serial_s5p.o
 obj-$(CONFIG_IMX_SERIAL) += serial_imx.o
-obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
 obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 obj-$(CONFIG_MXC_UART) += serial_mxc.o
 obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 95c992a..9f78492 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -127,7 +127,6 @@ serial_initfunc(evb64260_serial_initialize);
 serial_initfunc(imx_serial_initialize);
 serial_initfunc(iop480_serial_initialize);
 serial_initfunc(jz_serial_initialize);
-serial_initfunc(ks8695_serial_initialize);
 serial_initfunc(leon2_serial_initialize);
 serial_initfunc(leon3_serial_initialize);
 serial_initfunc(lh7a40x_serial_initialize);
@@ -220,7 +219,6 @@ void serial_initialize(void)
 	imx_serial_initialize();
 	iop480_serial_initialize();
 	jz_serial_initialize();
-	ks8695_serial_initialize();
 	leon2_serial_initialize();
 	leon3_serial_initialize();
 	lh7a40x_serial_initialize();
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
deleted file mode 100644
index 13adabd..0000000
--- a/drivers/serial/serial_ks8695.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * serial.c -- KS8695 serial driver
- *
- * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#ifndef CONFIG_SERIAL1
-#error "Bad: you didn't configure serial ..."
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- *	Define the UART hardware register access structure.
- */
-struct ks8695uart {
-	unsigned int	RX;		/* 0x00	- Receive data (r) */
-	unsigned int	TX;		/* 0x04	- Transmit data (w) */
-	unsigned int	FCR;		/* 0x08	- Fifo Control (r/w) */
-	unsigned int	LCR;		/* 0x0c	- Line Control (r/w) */
-	unsigned int	MCR;		/* 0x10	- Modem Control (r/w) */
-	unsigned int	LSR;		/* 0x14	- Line Status (r/w) */
-	unsigned int	MSR;		/* 0x18	- Modem Status (r/w) */
-	unsigned int	BD;		/* 0x1c	- Baud Rate (r/w) */
-	unsigned int	SR;		/* 0x20	- Status (r/w) */
-};
-
-#define	KS8695_UART_ADDR	((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER))
-#define	KS8695_UART_CLK		25000000
-
-
-/*
- * Under some circumstances we want to be "quiet" and not issue any
- * serial output - though we want u-boot to otherwise work and behave
- * the same. By default be noisy.
- */
-int serial_console = 1;
-
-
-static void ks8695_serial_setbrg(void)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-
-	/* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/
-	uartp->BD = KS8695_UART_CLK / gd->baudrate;
-	uartp->LCR = KS8695_UART_LINEC_WLEN8;
-}
-
-static int ks8695_serial_init(void)
-{
-	serial_console = 1;
-	serial_setbrg();
-	return 0;
-}
-
-static void ks8695_serial_raw_putc(const char c)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-	int i;
-
-	for (i = 0; (i < 0x100000); i++) {
-		if (uartp->LSR & KS8695_UART_LINES_TXFE)
-			break;
-	}
-
-	uartp->TX = c;
-}
-
-static void ks8695_serial_putc(const char c)
-{
-	if (serial_console) {
-		ks8695_serial_raw_putc(c);
-		if (c == '\n')
-			ks8695_serial_raw_putc('\r');
-	}
-}
-
-static int ks8695_serial_tstc(void)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-	if (serial_console)
-		return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0);
-	return 0;
-}
-
-static int ks8695_serial_getc(void)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-
-	while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0)
-		;
-	return (uartp->RX);
-}
-
-static struct serial_device ks8695_serial_drv = {
-	.name	= "ks8695_serial",
-	.start	= ks8695_serial_init,
-	.stop	= NULL,
-	.setbrg	= ks8695_serial_setbrg,
-	.putc	= ks8695_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= ks8695_serial_getc,
-	.tstc	= ks8695_serial_tstc,
-};
-
-void ks8695_serial_initialize(void)
-{
-	serial_register(&ks8695_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &ks8695_serial_drv;
-}
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
deleted file mode 100644
index 1cb54b3..0000000
--- a/include/configs/cm4008.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2004
- * Greg Ungerer <greg.ungerer@opengear.com>.
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_KS8695	1		/* it is a KS8695 CPU */
-#define CONFIG_CM4008	1		/* it is an OpenGear CM4008 boad */
-
-#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	 1
-
-#define CONFIG_DRIVER_KS8695ETH		/* use KS8695 ethernet driver	*/
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_KS8695_SERIAL
-#define	CONFIG_SERIAL1
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_SAVEENV
-
-
-#define CONFIG_BOOTDELAY	0
-#define CONFIG_BOOTARGS		"mem=16M console=ttyAM0,115200"
-#define CONFIG_BOOTCOMMAND	"gofsk 0x02200000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00800000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-
-#define CONFIG_SYS_INIT_SP_ADDR	0x00020000 /* lowest 128k of RAM */
-
-#define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_SIZE		0x20000     /* Total Size of Environment */
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
deleted file mode 100644
index adebd4b..0000000
--- a/include/configs/cm41xx.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer <greg.ungerer@opengear.com>.
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_KS8695	1		/* it is a KS8695 CPU */
-#define CONFIG_CM41xx	1		/* it is an OpenGear CM41xx boad */
-
-#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	 1
-
-#define CONFIG_DRIVER_KS8695ETH		/* use KS8695 ethernet driver	*/
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_KS8695_SERIAL
-#define	CONFIG_SERIAL1
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_SAVEENV
-
-
-#define CONFIG_BOOTDELAY	0
-#define CONFIG_BOOTARGS		"mem=32M console=ttyAM0,115200"
-#define CONFIG_BOOTCOMMAND	"gofsk 0x02200000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00800000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-
-#define CONFIG_SYS_INIT_SP_ADDR	0x00020000 /* lowest 128k of RAM */
-
-#define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_SIZE		0x20000     /* Total Size of Environment */
-
-#endif	/* __CONFIG_H */
diff --git a/include/netdev.h b/include/netdev.h
index daffc12..90140bd 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -55,7 +55,6 @@ int ftmac100_initialize(bd_t *bits);
 int ftmac110_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
-int ks8695_eth_initialize(void);
 int ks8851_mll_initialize(u8 dev_num, int base_addr);
 int lan91c96_initialize(u8 dev_num, int base_addr);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
diff --git a/include/serial.h b/include/serial.h
index 3d2e569..de40e94 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -182,7 +182,6 @@ void evb64260_serial_initialize(void);
 void imx_serial_initialize(void);
 void iop480_serial_initialize(void);
 void jz_serial_initialize(void);
-void ks8695_serial_initialize(void);
 void leon2_serial_initialize(void);
 void leon3_serial_initialize(void);
 void lh7a40x_serial_initialize(void);
