| Message ID | 1414740666-13337-2-git-send-email-hs@denx.de |
|---|---|
| State | Accepted, archived |
| Delegated to: | Andreas Bießmann |
| Headers | show |
On 31 October 2014 13:00, Heiko Schocher <hs@denx.de> wrote: > move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h > and define a default value. Delete this define in the board > config files, where it is possible (all boards use currently > the same value). > > Signed-off-by: Heiko Schocher <hs@denx.de> > --- > > Changes in v3: > rebased against 571bdf16a78e9e116a93d46f4809c4f8a3f2adb6 > > Changes in v2: > rebased against d58a9451e7339ed4cf2b2627e534611f427fb791 > new in v2 > > drivers/spi/atmel_spi.h | 4 ++++ > include/configs/afeb9260.h | 1 - > include/configs/at91sam9260ek.h | 1 - > include/configs/at91sam9261ek.h | 1 - > include/configs/at91sam9263ek.h | 1 - > include/configs/at91sam9rlek.h | 1 - > include/configs/ethernut5.h | 1 - > include/configs/meesc.h | 1 - > include/configs/otc570.h | 1 - > include/configs/pm9261.h | 1 - > include/configs/pm9263.h | 1 - > include/configs/sbc35_a9g20.h | 1 - > include/configs/tny_a9260.h | 1 - > include/configs/usb_a9263.h | 1 - > 14 files changed, 4 insertions(+), 13 deletions(-) > > diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h > index d240945..1538a23 100644 > --- a/drivers/spi/atmel_spi.h > +++ b/drivers/spi/atmel_spi.h > @@ -94,3 +94,7 @@ static inline struct atmel_spi_slave *to_atmel_spi(struct spi_slave *slave) > readl(as->regs + ATMEL_SPI_##reg) > #define spi_writel(as, reg, value) \ > writel(value, as->regs + ATMEL_SPI_##reg) > + > +#if !defined(CONFIG_SYS_SPI_WRITE_TOUT) > +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > +#endif > diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h > index 14bac15..932a309 100644 > --- a/include/configs/afeb9260.h > +++ b/include/configs/afeb9260.h > @@ -77,7 +77,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH > -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ > diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h > index 73917b0..72247cc 100644 > --- a/include/configs/at91sam9260ek.h > +++ b/include/configs/at91sam9260ek.h > @@ -135,7 +135,6 @@ > #ifndef CONFIG_AT91SAM9G20EK_2MMC > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH 1 > -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ > diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h > index 226f8c1..cb16bda 100644 > --- a/include/configs/at91sam9261ek.h > +++ b/include/configs/at91sam9261ek.h > @@ -107,7 +107,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH > -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ > diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h > index b666d94..fa19e8b 100644 > --- a/include/configs/at91sam9263ek.h > +++ b/include/configs/at91sam9263ek.h > @@ -119,7 +119,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH 1 > -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define AT91_SPI_CLK 15000000 > diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h > index b8d5dd1..d5f0197 100644 > --- a/include/configs/at91sam9rlek.h > +++ b/include/configs/at91sam9rlek.h > @@ -100,7 +100,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH 1 > -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define AT91_SPI_CLK 15000000 > diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h > index 4c69af6..ce61a16 100644 > --- a/include/configs/ethernut5.h > +++ b/include/configs/ethernut5.h > @@ -78,7 +78,6 @@ > > /* SPI */ > #define CONFIG_ATMEL_SPI > -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > #define AT91_SPI_CLK 15000000 > > /* Serial port */ > diff --git a/include/configs/meesc.h b/include/configs/meesc.h > index 86ce5f2..955d0e2 100644 > --- a/include/configs/meesc.h > +++ b/include/configs/meesc.h > @@ -124,7 +124,6 @@ > #ifdef CONFIG_SYS_USE_DATAFLASH > # define CONFIG_ATMEL_DATAFLASH_SPI > # define CONFIG_HAS_DATAFLASH > -# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > # define AT91_SPI_CLK 15000000 > diff --git a/include/configs/otc570.h b/include/configs/otc570.h > index 629967d..2390beb 100644 > --- a/include/configs/otc570.h > +++ b/include/configs/otc570.h > @@ -174,7 +174,6 @@ > #ifdef CONFIG_SYS_USE_DATAFLASH > # define CONFIG_ATMEL_DATAFLASH_SPI > # define CONFIG_HAS_DATAFLASH > -# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > # define AT91_SPI_CLK 15000000 > diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h > index 4a71927..0746056 100644 > --- a/include/configs/pm9261.h > +++ b/include/configs/pm9261.h > @@ -202,7 +202,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH > -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ > diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h > index d9c04d1..f0f12af 100644 > --- a/include/configs/pm9263.h > +++ b/include/configs/pm9263.h > @@ -216,7 +216,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH 1 > -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define AT91_SPI_CLK 15000000 > diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h > index a1b5751..e7c35ec 100644 > --- a/include/configs/sbc35_a9g20.h > +++ b/include/configs/sbc35_a9g20.h > @@ -80,7 +80,6 @@ > #define CONFIG_SPI > #define CONFIG_CMD_SPI > #define CONFIG_ATMEL_SPI > -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > > #define CONFIG_CMD_EEPROM > #define CONFIG_SPI_M95XXX > diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h > index 32f6b00..79c7fc5 100644 > --- a/include/configs/tny_a9260.h > +++ b/include/configs/tny_a9260.h > @@ -85,7 +85,6 @@ > #define CONFIG_SPI > #define CONFIG_CMD_SPI > #define CONFIG_ATMEL_SPI > -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) > > #define CONFIG_CMD_EEPROM > #define CONFIG_SPI_M95XXX > diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h > index 3c54870..84571f6 100644 > --- a/include/configs/usb_a9263.h > +++ b/include/configs/usb_a9263.h > @@ -85,7 +85,6 @@ > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH > -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) > #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 > #define AT91_SPI_CLK 8000000 > -- > 1.8.3.1 > Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> thanks!
On 31.10.14 08:30, Heiko Schocher wrote: > move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h > and define a default value. Delete this define in the board > config files, where it is possible (all boards use currently > the same value). > > Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> > --- > > Changes in v3: > rebased against 571bdf16a78e9e116a93d46f4809c4f8a3f2adb6 > > Changes in v2: > rebased against d58a9451e7339ed4cf2b2627e534611f427fb791 > new in v2 > > drivers/spi/atmel_spi.h | 4 ++++ > include/configs/afeb9260.h | 1 - > include/configs/at91sam9260ek.h | 1 - > include/configs/at91sam9261ek.h | 1 - > include/configs/at91sam9263ek.h | 1 - > include/configs/at91sam9rlek.h | 1 - > include/configs/ethernut5.h | 1 - > include/configs/meesc.h | 1 - > include/configs/otc570.h | 1 - > include/configs/pm9261.h | 1 - > include/configs/pm9263.h | 1 - > include/configs/sbc35_a9g20.h | 1 - > include/configs/tny_a9260.h | 1 - > include/configs/usb_a9263.h | 1 - > 14 files changed, 4 insertions(+), 13 deletions(-)
Dear Heiko Schocher, Heiko Schocher <hs@denx.de> writes: >move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h >and define a default value. Delete this define in the board >config files, where it is possible (all boards use currently >the same value). > >Signed-off-by: Heiko Schocher <hs@denx.de> >Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> >Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> >--- > >Changes in v3: >rebased against 571bdf16a78e9e116a93d46f4809c4f8a3f2adb6 > >Changes in v2: >rebased against d58a9451e7339ed4cf2b2627e534611f427fb791 >new in v2 > > drivers/spi/atmel_spi.h | 4 ++++ > include/configs/afeb9260.h | 1 - > include/configs/at91sam9260ek.h | 1 - > include/configs/at91sam9261ek.h | 1 - > include/configs/at91sam9263ek.h | 1 - > include/configs/at91sam9rlek.h | 1 - > include/configs/ethernut5.h | 1 - > include/configs/meesc.h | 1 - > include/configs/otc570.h | 1 - > include/configs/pm9261.h | 1 - > include/configs/pm9263.h | 1 - > include/configs/sbc35_a9g20.h | 1 - > include/configs/tny_a9260.h | 1 - > include/configs/usb_a9263.h | 1 - > 14 files changed, 4 insertions(+), 13 deletions(-) applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann
diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h index d240945..1538a23 100644 --- a/drivers/spi/atmel_spi.h +++ b/drivers/spi/atmel_spi.h @@ -94,3 +94,7 @@ static inline struct atmel_spi_slave *to_atmel_spi(struct spi_slave *slave) readl(as->regs + ATMEL_SPI_##reg) #define spi_writel(as, reg, value) \ writel(value, as->regs + ATMEL_SPI_##reg) + +#if !defined(CONFIG_SYS_SPI_WRITE_TOUT) +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +#endif diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 14bac15..932a309 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -77,7 +77,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 73917b0..72247cc 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -135,7 +135,6 @@ #ifndef CONFIG_AT91SAM9G20EK_2MMC #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 226f8c1..cb16bda 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -107,7 +107,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index b666d94..fa19e8b 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -119,7 +119,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define AT91_SPI_CLK 15000000 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index b8d5dd1..d5f0197 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -100,7 +100,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define AT91_SPI_CLK 15000000 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 4c69af6..ce61a16 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -78,7 +78,6 @@ /* SPI */ #define CONFIG_ATMEL_SPI -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define AT91_SPI_CLK 15000000 /* Serial port */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 86ce5f2..955d0e2 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -124,7 +124,6 @@ #ifdef CONFIG_SYS_USE_DATAFLASH # define CONFIG_ATMEL_DATAFLASH_SPI # define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ # define AT91_SPI_CLK 15000000 diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 629967d..2390beb 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -174,7 +174,6 @@ #ifdef CONFIG_SYS_USE_DATAFLASH # define CONFIG_ATMEL_DATAFLASH_SPI # define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ # define AT91_SPI_CLK 15000000 diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 4a71927..0746056 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -202,7 +202,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index d9c04d1..f0f12af 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -216,7 +216,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define AT91_SPI_CLK 15000000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index a1b5751..e7c35ec 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -80,7 +80,6 @@ #define CONFIG_SPI #define CONFIG_CMD_SPI #define CONFIG_ATMEL_SPI -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define CONFIG_CMD_EEPROM #define CONFIG_SPI_M95XXX diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 32f6b00..79c7fc5 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -85,7 +85,6 @@ #define CONFIG_SPI #define CONFIG_CMD_SPI #define CONFIG_ATMEL_SPI -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define CONFIG_CMD_EEPROM #define CONFIG_SPI_M95XXX diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 3c54870..84571f6 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -85,7 +85,6 @@ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 #define AT91_SPI_CLK 8000000
move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h and define a default value. Delete this define in the board config files, where it is possible (all boards use currently the same value). Signed-off-by: Heiko Schocher <hs@denx.de> --- Changes in v3: rebased against 571bdf16a78e9e116a93d46f4809c4f8a3f2adb6 Changes in v2: rebased against d58a9451e7339ed4cf2b2627e534611f427fb791 new in v2 drivers/spi/atmel_spi.h | 4 ++++ include/configs/afeb9260.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/ethernut5.h | 1 - include/configs/meesc.h | 1 - include/configs/otc570.h | 1 - include/configs/pm9261.h | 1 - include/configs/pm9263.h | 1 - include/configs/sbc35_a9g20.h | 1 - include/configs/tny_a9260.h | 1 - include/configs/usb_a9263.h | 1 - 14 files changed, 4 insertions(+), 13 deletions(-)